What does gasoline 48V mild hybrid mean?

1 Answers
LaEmma
07/29/25 5:23pm
Gasoline 48V mild hybrid refers to a mild hybrid system, the core component of which is a 48V electric motor. This motor can function as both a starter and a generator, and in some vehicles, the 48V motor can also directly drive the car forward. Installing a 48V mild hybrid system on the engine can improve fuel economy. There are many cars equipped with the 48V mild hybrid system, such as the new Mercedes-Benz C-Class, Mercedes-Benz S-Class, Audi A6L, Land Rover Range Rover, etc. Additionally, many models from domestic brands also use the 48V mild hybrid system. The 48V mild hybrid system is a low-cost solution to reduce exhaust emissions. The performance impact of the mild hybrid system on the car varies significantly depending on the installation position of the electric motor.
Was this review help?
19
2
Share
More Forum Discussions

What to Do If Too Much Antifreeze Is Added?

The solutions for adding too much antifreeze are: 1. Use a syringe to extract the excess antifreeze; 2. Open the antifreeze drain plug under the radiator to release some antifreeze. The steps for adding antifreeze are: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze; 2. Insert a rubber tube into the radiator filler neck, turn on the tap to flush the engine cooling system; 3. After draining the water from the cooling system, close the radiator drain valve; 4. Unscrew the reservoir cap, add antifreeze until the liquid level reaches the MAX mark; 5. Tighten the reservoir cap; 6. Start the engine, let it idle for 2 to 3 minutes, then open the radiator cap to allow the cooling system to expel some air. The antifreeze level will drop, so top it up again to the MAX mark.
10
5
Share

Where is the external cabin air filter located on a BMW 740?

The external cabin air filter on a BMW 740 is located inside the glove compartment on the passenger side. Method to inspect the cabin air filter: Open the glove compartment, release the clips on both sides and a pull cord, then fully lower the glove compartment. You will see several cross-head screws - remove all of them and pull out the inner partition of the glove compartment to reveal the filter. Location of cabin air filters in other models: Cabin air filters are generally located in two positions: one inside the passenger-side glove compartment (simply remove the glove compartment to access it), and another beneath the front windshield, covered by a drainage channel (to replace this filter, open the engine hood and remove the drainage channel).
1
3
Share

Why Does Only One Reversing Light Work?

The reasons why only one reversing light works are: 1. The reversing light bulb is faulty; 2. Poor contact or short circuit in the reversing light circuit; 3. There is only one reversing light. The working principle of the reversing light is: when the car is reversing, after shifting into reverse gear, the mechanical mechanism presses down the switch contacts, closing the circuit and turning on the reversing light. When the reverse gear is disengaged, the switch contacts spring back, and the reversing light circuit becomes open again, turning off the reversing light. The precautions for reversing are: 1. Adjust the interior rearview mirror properly; 2. Pay attention to both left and right side mirrors; 3. Control the speed; 4. Stop and wait in time when there are pedestrians or oncoming vehicles; 5. Use the reversing camera to accurately judge the distance.
13
2
Share

What to Do If Vehicle License or Driver's License Is Lost?

If the motor vehicle license is lost, the owner of the motor vehicle should apply for a replacement at the vehicle management office of the registration location. The required materials for the application are as follows: 1. Application form: 'Motor Vehicle License Plate and Certificate Application Form'. 2. ID: Original and photocopy of the owner's identity proof. 3. Lost part: For replacement or reissuance of license plates or vehicle licenses, the undamaged, lost, or damaged parts must be returned. 4. Proxy proof: If an agent handles the application, a power of attorney and the agent's identity proof must also be submitted. 5. Other proofs: Other proofs and certificates required by laws and administrative regulations when applying for replacement registration certificates, replacement or reissuance of license plates, or vehicle licenses.
14
3
Share

Why Does the BMW N20 Engine's High-Pressure Fuel Pump Make Noise When Starting?

BMW N20 engine's high-pressure fuel pump making noise when starting is mainly caused by overfilling the fuel tank, insufficient fuel storage, or fuel pump damage. Overfilling the Fuel Tank: When refueling the car, it is advisable not to fill the tank completely at once, as this may cause the fuel float and sensor to malfunction, distort the fuel gauge, and increase fuel consumption. It is recommended to refuel when the fuel level is low. Insufficient Fuel Storage: When refueling the car, do not wait until the fuel warning light comes on. Having too little fuel or running out of fuel may burn out the fuel pump and reduce its service life. Fuel Pump Damage: Improper refueling behavior may damage the high-pressure fuel pump.
4
1
Share

What is a car DSP?

The following is relevant information about DSP amplifiers: 1. Introduction to DSP amplifiers: A DSP amplifier refers to an amplifier that utilizes a DSP chip to optimize and manage audio parameters through digital signal processing algorithms. It is a technology that converts two-channel stereo signals into multi-channel surround sound signals. 2. Characteristics of DSP amplifiers: Can complete one multiplication and one addition within a single instruction cycle; separates program and data spaces, allowing simultaneous access to instructions and data; contains fast RAM on-chip, typically accessible via independent data buses in two blocks simultaneously; provides hardware support for low-overhead or no-overhead loops and jumps; offers fast interrupt handling and hardware I/O support; features multiple hardware address generators that operate within a single cycle; enables parallel execution of multiple operations; supports pipeline operations, allowing overlapping execution of operations such as fetching, decoding, and executing.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.