···
Log in / Register

What does fuel additive mean?

5 Answers
VonDelaney
07/29/25 7:42am

Fuel additive is a type of fuel treatment that is directly added into the vehicle's fuel tank to clean carbon deposits, improve atomization, reduce wear, and lower emissions. Here is the relevant information: 1. Introduction: Fuel additive (also known as gasoline detergent or fuel treatment) is a type of automotive chemical and a common name for the third generation of gasoline detergents. 2. Function: Its purpose is to address carbon deposit issues in the fuel system of fuel-injected vehicles, quickly restore the engine to optimal working condition, and compensate for certain deficiencies in gasoline properties, while also providing new beneficial characteristics such as improved atomization, reduced wear, engine protection, and lower emissions.

Was this review help?
9
2
Share
SanLucas
08/13/25 2:00am

Oil Booster is actually a common name for fuel additives, equivalent to a health supplement for cars. Normally, you pour a small bottle into the fuel tank before refueling. It helps the engine clean up carbon deposits and sludge, especially suitable for older cars that frequently encounter traffic jams in urban areas. After using it a few times, I felt the throttle response became smoother, and fuel consumption slightly decreased. When choosing an Oil Booster, pay attention to the ingredients—PEA-based formulas offer good cleaning effects without damaging parts. However, don’t believe it can cure all problems. If the engine has real issues, you still need to visit a repair shop. Remember to buy genuine products from reputable brands, as off-brands might corrode fuel lines. New cars generally don’t need it for the first two years—wait until you’ve driven 30,000 to 40,000 kilometers before using it.

Was this review help?
15
4
Share
Expand All
LaCooper
10/04/25 8:38am

Oil Booster, commonly known as fuel additive, is a little helper mainly used to tackle engine carbon deposits. I add a bottle during every maintenance service, and it really makes the engine sound smoother during acceleration. The principle is that its active ingredients can decompose carbon deposits during combustion, preventing fuel injector clogging. Remember, it works best when poured in before refueling. Don't hesitate to fill up the tank after adding it, as this ensures better mixing of the additive. With so many brands on the market, it's easy to get overwhelmed. I recommend choosing products with API certification or those recommended by the original manufacturer. However, note that new cars with less than 20,000 kilometers don't need it, as excessive cleaning might damage the catalytic converter.

Was this review help?
11
4
Share
Expand All
Garcia
11/18/25 3:25am

Oil Treasure is officially named Fuel System Cleaner, which is like facial cleanser for engines. When I worked in auto repair, I saw too many problems caused by inferior oil cleaners - some people even ended up with clogged fuel lines requiring expensive repairs. Choosing Oil Treasure mainly depends on purpose: red packaging is for intensive cleaning, while blue is for routine maintenance. Add one bottle when refueling, and you'll see results after running through one tank of fuel. It not only cleans fuel injectors but also prevents rust and extends component lifespan. Particularly beneficial for vehicles frequently driven short distances, it helps prevent cold start vibration issues. But remember not to use it daily - applying every 5,000 to 10,000 kilometers is ideal.

Was this review help?
1
5
Share
Expand All
CalvinLynn
01/08/26 5:02am

Oil Magic is essentially a fuel additive, and all three of my cars use it. The most noticeable effect is that the exhaust smell becomes less pungent after use, and the emission values during annual inspections also improve. Currently, there are three generations of Oil Magic on the market: the first generation cleans the fuel system, the second removes carbon deposits, and the third also protects the oxygen sensor. I make it a habit to add one bottle every time I refuel, but it's important to avoid switching between different brands consecutively. Before purchasing, check the manual—some direct-injection engines require specialized formulas. Don’t believe the gas station salespeople’s claims of 30% fuel savings; in reality, a 5% reduction is already quite good.

Was this review help?
5
2
Share
Expand All
More Forum Discussions

How Fast is 25km/h?

In everyday language, the term 'speed in code' originates from the speed unit 'mile'. The commonly mentioned speed of 100 code is equivalent to 100 kilometers per hour, while the British term '100 miles' equals 160 kilometers per hour. Therefore, 25km/h represents 25 miles, whereas in foreign countries it is 40 miles, which is approximately a speed of 7 meters per second. Relevant information about speed limits is as follows: 1. Introduction to Speed Limits: Speed limits usually refer to the regulation of vehicle speeds within a certain numerical range over a specific length of road. 2. Purpose of Speed Limits: The main purpose is to pre-warn drivers to reasonably control their speed in subsequent road sections ahead, prevent the dangers of speeding, and ensure driving safety. Speed limits are an indispensable and also the most important part of road transport safety.
14
3
Share

What are the benefits of having larger front wheels and smaller rear wheels?

Front wheels are responsible for steering, and smaller wheels have less friction, which has less impact on speed. Rear wheels rely on friction to drive the vehicle, so the rear wheels are slightly larger. Having smaller front wheels and larger rear wheels provides better climbing power, higher safety performance, and lighter steering for easier turning. Here is additional information: Rear wheels: Rear wheels are the driving wheels, while front wheels are the steering wheels. Besides steering, the front wheels only need to bear the weight of the diesel engine, with essentially no other tasks, so there is no need for them to be very large. On the other hand, rear wheels are the driving wheels. For example, tractors are characterized by strong towing capacity. Diesel engines inherently have high torque, and with the addition of high and low speeds in the transmission, the torque amplification in low gear is quite powerful, allowing the vehicle to easily pull several tons of cargo.
12
0
Share

What are the effects of removing the thermostat in summer?

Car thermostats should not be removed, otherwise the engine will have difficulty maintaining a normal operating temperature, which not only affects the engine's working condition but also reduces the car's power. The effects of removing the thermostat are as follows: 1. Lower temperature: After removing the thermostat, the engine's operating temperature will definitely be lower than before, affecting the engine's thermal efficiency and leading to issues such as insufficient power. 2. Increased warm-up time: Secondly, the engine's warm-up time will be several times longer than normal, and the internal parts' wear may even increase by several dozen times. 3. Poor fuel atomization: Due to the engine's operating temperature being too low, fuel atomization will be poor, and over time, a thick layer of carbon deposits can easily form, which is very detrimental to the car's fuel consumption.
9
3
Share

Where is the thermostat located on the Vios?

Toyota Vios thermostat is located on the lower radiator hose, to the right of the exhaust manifold. Here is more information about the thermostat: 1. Introduction: The thermostat automatically adjusts the amount of water entering the radiator based on the coolant temperature, changing the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range. 2. Working principle: Automobiles typically use a wax-type thermostat. When the coolant temperature is below the specified value, the refined paraffin inside the thermostat's temperature-sensing element remains in a solid state, and the thermostat valve closes the passage between the engine and the radiator under the action of the spring. The coolant returns to the engine via the water pump, performing a small circulation within the engine.
8
2
Share

How Long Does Audi Personalization Customization Take?

Audi personalization customization takes at least 5 months. Here is a brief introduction about Audi: 1. Basic Information: Audi is a famous automobile developer and manufacturer, with its logo being four interlocking rings. It is currently a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. Main models include Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, as well as S and RS performance series. 2. Company Address: The Audi Group includes its parent company and subsidiaries such as Audi Hungaria, quattro GmbH, Lamborghini Automobili, and Cosworth Technology, Audi Brasil and Audi Senna. Additionally, Audi also has production plants in China, Malaysia, South Africa, and other locations.
4
5
Share

What colors are available for the Beijing BJ40?

Beijing BJ40 offers 7 color options: Extreme Night Black, Jungle Green, Flame Red, Snowfield White, Desert Gold, Danxia Red, and Beret Green. Here is more information about the Beijing BJ40: 1. Vehicle Positioning: The Beijing BJ40 is manufactured by Beijing Off-Road and is classified as a compact SUV. The vehicle dimensions are 4630mm in length, 1925mm in width, and 1871mm in height, with a wheelbase of 2745mm. It is a 5-door, 5-seater SUV. 2. Powertrain: The Beijing BJ40 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 170.0 KW, 231 PS, and a peak torque of 380.0 Nm.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.