What does FS mean on Mobil oil?

What to Do When an Electric Vehicle Stops Moving After Passing Through Water?

If an electric vehicle suddenly stops moving after passing through water, do not start it immediately. Park in a safe area and let it dry for one to two hours to restore performance. Below is additional information: 1. Precautions: When driving through water, always assess the environment. For pure electric vehicles, the water depth should not exceed 30cm (15cm for battery-swapping vehicles), and the speed should be kept below 10km/h. Monitor the dashboard for any alarms and drive cautiously. If an insulation fault is reported, stop immediately for inspection. 2. Reference: Electric vehicles are not suitable for passing through water deeper than half the tire height. Additionally, if there are no vehicles or pedestrians as reference points, use the roadbed as a guide. If necessary, exit the vehicle and check the water depth using an umbrella or branch. 3. Immediate Shutdown: Regardless of the electric vehicle's performance, avoid driving through flooded areas whenever possible. Park the vehicle in an open, elevated area. If the vehicle stalls, do not start it immediately. Park in a safe area and let it dry for one to two hours to restore performance. If the electric vehicle stops moving after passing through water, do not start it immediately. Park in a safe area and let it dry for one to two hours to restore performance.

19

4

Share

Where to Check the Tire Pressure Display on the Haval F7?

Haval F7's tire pressure display can be viewed on the dashboard. The tire pressure display monitors the tire pressure and temperature in real-time and alerts the driver when there is an abnormality in the tire, prompting them to take appropriate measures to avoid accidents. Taking the 2021 Haval F7 as an example, it is a compact SUV with body dimensions of 4620mm in length, 1846mm in width, and 1690mm in height, a wheelbase of 2725mm, and a minimum ground clearance of 169mm. The 2021 Haval F7 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum torque of 285Nm, and a maximum power of 124kW, paired with a 7-speed dual-clutch transmission.

17

4

Share

What engine does the Porsche 911 use?

The Porsche 911 is equipped with a 3.0T twin-turbocharged engine, delivering a maximum horsepower of 385 PS, a maximum power output of 283 kW, and a peak torque of 450 Nm. It is paired with an 8-speed dual-clutch transmission. The Porsche 911 is a 2-door, 4-seater soft-top convertible, featuring a MacPherson strut front suspension and a multi-link rear suspension. The dimensions of the Porsche 911 are as follows: length of 4519 mm, width of 1852 mm, height of 1297 mm, with a wheelbase of 2450 mm. The front track measures 1591 mm, and the rear track is 1557 mm. It has a fuel tank capacity of 67 liters and a luggage compartment volume of 132 liters. The curb weight is 1665 kg.

20

3

Share

What does the cruise control system mean?

Cruise control system is used to control the constant speed driving of the car. The functions of cruise control system include: 1. Cruise control function; 2. Electronic fuel-saving function; 3. Throttle acceleration function; 4. Speed limit setting function; 5. Brake failure alarm function. Precautions for using cruise control system are: 1. Disable in rainy or snowy weather; 2. Disable on winding mountain roads or roads with many curves; 3. Disable on roads with heavy traffic or poor road conditions; 4. When the speed is higher than 40 kilometers per hour, do not shift the gear lever into neutral without stepping on the clutch pedal; 5. When the set cruising speed is higher than the current traffic conditions, do not restore the set speed.

1

4

Share

What are the components of the valve train?

The components of the valve train are: 1. Valve group: valves, valve guides, valve seats, valve locks, and valve springs; 2. Valve drive group: camshaft, timing gear, timing chain, timing belt, tappet, pushrod, rocker arm, rocker shaft, and rocker bracket. The functions of the valve train are: 1. To open and close the intake and exhaust valves of each cylinder in accordance with the working cycle and ignition sequence of the engine; 2. To allow the combustible mixture or air to enter the cylinder in a timely manner and exhaust gases to be discharged from the cylinder promptly; 3. To ensure the sealing of the combustion chamber by closing the valves during the compression and power strokes.

5

Share

Is the BYD F3 compliant with China VI emission standards?

The BYD F3 is compliant with China VI emission standards. The dimensions of the BYD F3 are: length 4533mm, width 1705mm, height 1490mm, with a wheelbase of 2600mm, a minimum ground clearance of 170mm, a fuel tank capacity of 50 liters, and a trunk capacity of 430 liters. The front suspension of the BYD F3 is a MacPherson strut independent suspension, and the rear suspension is a torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109 PS, a maximum power of 80 kW, and a maximum torque of 148 Nm. It is paired with a 5-speed manual transmission.

5

Share

What does FS mean on Mobil oil?

What to Do When an Electric Vehicle Stops Moving After Passing Through Water?

Where to Check the Tire Pressure Display on the Haval F7?

What engine does the Porsche 911 use?

What does the cruise control system mean?

What are the components of the valve train?

Is the BYD F3 compliant with China VI emission standards?

How to Pair a Car Remote Key with the Vehicle?

Are External Tire Pressure Monitoring Systems Accurate?

Why is a galloping horse the logo of a car brand?

What to Do When the Navigation Reverse Camera Does Not Display?