What does 'Front Passenger Airbag Activated' mean?

1 Answers
McRemington
07/29/25 2:32pm
Front Passenger Airbag Activated means there is a pressure sensor in the front passenger seat. If an adult or an object in this seat triggers the sensor, the front passenger airbag will be activated. Below is some relevant information about airbags: 1. Composition: Mainly consists of airbag sensors, collision airbags, and electronic control devices. The airbag assembly primarily includes the airbag, gas generator, and igniter. 2. Airbag Indicators: Car airbags are distributed in three directions within the vehicle—front (driver and passenger seats), side (front and rear seats inside the car), and roof. Containers equipped with airbag systems are marked with 'SRS/AIRBAG' on the exterior.
Was this review help?
7
1
Share
More Forum Discussions

Does the score reset when renewing an expired license?

Renewing an expired driver's license does not reset the penalty points. The clearance of penalty points is calculated based on the driver's license scoring cycle, not on whether the license is renewed. License renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses must have no penalty points in the current scoring cycle, or holders of other types of driver's licenses must have fewer than 12 penalty points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses who have penalty points in a scoring cycle, as well as holders of other types of driver's licenses involved in traffic accidents resulting in death and bearing equal or greater responsibility without having their driver's licenses revoked, must have completed the inspection education; The applicant must have no pending road traffic safety violations or traffic accidents; The applicant's physical condition must meet the driving permit requirements; The driver's license must not be seized, detained, suspended, revoked, canceled, or annulled by law.
4
3
Share

Is tire noise louder in summer or winter?

Tire noise is louder in winter because the rubber becomes relatively softer in summer. New tires produce more noise: New tires generate more noise due to greater tread pattern resonance, which increases tire noise. Another reason could be the difference in aspect ratio between new and old tires. New tires have a lower aspect ratio, resulting in a larger contact area with the ground, which also leads to increased tire noise. Additionally, new tires may have harder rubber compounds, contributing to louder noise. The influence of tire pressure: Tire pressure is closely related to tire noise, as it significantly affects the noise level. If the tire pressure is too high, the tire becomes more rigid, leading to increased noise. Conversely, if the tire pressure is too low, the contact area between the tire and the ground increases, raising the friction coefficient and resistance, which not only makes the noise louder but also increases fuel consumption.
7
4
Share

How Often Should a Spare Tire Be Replaced?

Spare tires should be replaced every four years. Since tires are rubber products, prolonged storage can lead to aging. Spare Tire Aging Period: Spare tires should be replaced after a certain period. Generally, the aging period for tires is around four years, so spare tires should be replaced after this time. Reasons for Replacing Spare Tires: Tires are rubber products, and prolonged storage can cause aging. Due to infrequent use, the tread of a spare tire tends to be newer and harder, with less flexibility compared to regular tires. Additionally, spare tires often have lower air pressure. The issue is more pronounced with winter tires—if the other three tires are snow tires while the spare is a standard all-season tire, the difference in traction performance becomes significant. This creates an imbalance in the vehicle, making it prone to delayed control responses at higher speeds, which can compromise driving safety.
1
0
Share

How soon after purchasing a motorcycle can it be licensed?

Motorcycles can be licensed immediately after purchase. Licensing period: The "Road Traffic Safety Law of the People's Republic of China" does not specify a licensing period for newly purchased motorcycles, but any newly purchased motorcycle must be licensed before it can be driven on the road. New vehicles should be registered at the local vehicle management office within 30 days, and the required documents include the purchase invoice, the motorcycle, the owner's ID card, and a seal. Licensing time: As long as all the required documents are complete, the license plate and vehicle registration certificate can be obtained on the same day at the local vehicle management office. The process of obtaining a driver's license takes longer, with the legally mandated minimum time being 27 days from submitting the application to receiving the license, but it generally takes 40-50 days.
11
2
Share

Can Two-Tone Car Wraps Be Registered?

Two-tone car wraps can be registered. After applying a color-changing wrap to the vehicle, the owner or their agent must bring the required documents and invoice to the local vehicle management office to complete the registration process for the color change. The registration must be done within 10 days of applying the wrap. Documents required for car wrap registration: For car wrap registration, you will need the "Motor Vehicle Change Registration/Record Application Form," the original and a copy of the vehicle owner's ID, the original "Motor Vehicle Registration Certificate," the original "Motor Vehicle License," and the "Motor Vehicle Inspection Record Form" issued by the inspection officer after confirming the vehicle. Precautions for car wrapping: After the entire vehicle is wrapped, the owner should sit inside the car to check the color, any foreign objects or sand particles, and observe from different angles whether the wrap affects visibility. After the wrap is applied, the side windows should not be rolled down for 24 hours in summer and 48-72 hours in winter. The wrap, which is not yet fully adhered, can easily shift during this period.
7
5
Share

What are the requirements for seat belt suspension?

The requirements for seat belt suspension are: The rope should not be tied in knots to avoid the knot being cut under force; When used for horizontal suspension, be cautious of swing collisions; It should be vertically suspended, with a high anchor point and low usage for greater safety; The hook should not be directly attached to unstable objects or non-metal walls to prevent the rope from being severed. Origin of car seat belts: As a basic protective device for drivers and passengers during car collisions, the seat belt predates the automobile itself. As early as 1885, seat belts appeared and were used in carriages to prevent passengers from falling off. On May 20, 1902, during a car race in New York, a racer used several leather straps to secure himself and his companion to their seats to prevent being thrown out at high speeds. During the race, their car accidentally crashed into the audience, resulting in two deaths and dozens of injuries, but these racers survived due to the leather straps. These straps became the prototype of car seat belts, and their first use in a car saved the users' lives. Precautions for using seat belts: Regularly check the technical condition of the seat belts, and replace them promptly if damage is found; Seat belts must be installed in conjunction with the seats and should not be disassembled at will; If a seat belt has been subjected to a strong stretching load during use, it should be replaced even if it appears undamaged; When cleaning dirty seat belts, use mild soap and water as a cleaning solution, and scrub with a cloth or sponge. Avoid using dyes and bleach, as they can corrode the seat belt and reduce its tensile strength. Also, refrain from using hard brushes to prevent damage to the seat belt.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.