What does 'front' mean on a car's air conditioner?

What are the body dimensions of the Trumpchi GE3?

The length, width, and height dimensions of the Trumpchi GE3 are 4337mm/1825mm/1658mm, which are official data. The length of the Trumpchi GE3 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The permanent magnet/synchronous motor of the Trumpchi GE3 has a maximum power of 132kW and a maximum torque of 290 Nm. The battery type is a ternary lithium battery, and the motor is matched with a fixed gear ratio transmission. The state has relevant regulations on vehicle dimensions. According to the national standard "GB1589-89" issued, the total width of a vehicle does not include rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data is to ensure sufficient space during overtaking, avoiding accidents due to excessive width or situations where road markings are narrower than the vehicle width. Additionally, the state stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

14

4

Share

How to Prevent Rolling Back on Steep Slopes?

Methods to prevent rolling back on steep slopes are as follows: 1. Proper Use of the Handbrake: When starting the car, simply pull the handbrake tight, slowly release the clutch to the engagement point, then immediately stabilize the clutch and release the handbrake. This will prevent the car from rolling back on the slope. 2. Correct Gear Adjustment: When you feel the car has enough power to drive in a higher gear, shift up to the next gear promptly. In other words, try to drive in higher gears as much as possible. When the power is insufficient, quickly downshift instead of forcing it, which could lead to stalling. If you miss the shift timing, you can skip a gear to downshift. 3. Driving According to the Slope: When driving up a steep slope, choose an appropriate gear based on the slope conditions to keep the engine sufficiently powered. When navigating a short and gentle uphill slope with wide, smooth roads and good visibility, you can use inertia to accelerate and climb the slope.

18

4

Share

How to Reset the Maintenance Light on a Corolla?

The purpose of the maintenance light is to record the mileage of some important components, serving as a reminder for car owners and automotive maintenance personnel. After replacing relevant parts, it is necessary to reset the corresponding car maintenance light so that the owner can accurately know the usage time of the new components. Below are the steps to reset the maintenance light on a Corolla: 1. First, press the "DISP" button to display the settings screen, then hold the "DISP" button on the steering wheel to display the customization mode screen. 2. Press the "DISP" button to select the maintenance setting, then hold the "DISP" button. 3. Press the "DISP" button to select "Yes," and finally hold the "DISP" button.

17

3

Share

How often should antifreeze be completely replaced?

Antifreeze should generally be replaced every 2 years or 40,000 kilometers. Below are detailed explanations about antifreeze: 1. Definition: The full name of antifreeze should be antifreeze coolant, meaning it is a coolant with antifreeze properties. Antifreeze prevents the coolant from freezing and expanding in cold winter conditions, which could crack the radiator or damage the engine cylinder block or head. 2. Functions: Engine antifreeze has characteristics such as freeze protection, boil-over prevention, corrosion inhibition, scale prevention, and being foam-free. It is not affected by seasons or regions. 3. Quality Standards: The primary measure of antifreeze quality is its freeze protection capability. Water freezes at 0°C, while standard antifreeze typically protects down to -40°C. High-quality antifreeze should protect down to around -60°C, which is an important indicator of antifreeze quality. Another measure is the boiling point of antifreeze. Water boils at 100°C, while antifreeze should have a boiling point of at least 108°C. In other words, the lower the freezing point and the higher the boiling point, the greater the temperature range, indicating better antifreeze quality.

20

4

Share

How Often Should the Fuel Filter in a Car Be Replaced?

The replacement interval for a fuel filter is between 20,000 to 40,000 kilometers. Below are specific details about fuel filters: 1. There are two main types of fuel filters in cars: one is built-in (default replacement at 40,000 kilometers), and the other is external (default replacement at 20,000 kilometers). 2. The fuel filter is mainly installed in the fuel line near the fuel tank and serves to filter impurities from the gasoline. The replacement interval for the fuel filter also depends on the car's usage. If the car is properly maintained, the replacement interval can be appropriately extended. 3. If you notice a decrease in power while driving, it might be due to a blocked fuel line, and the fuel filter should be checked promptly. 4. The fuel filters used in cars are paper filters, with a hard plastic shell. When the fuel filter becomes clogged, the resistance increases, causing poor fuel flow, which affects the engine's fuel supply and leads to a decrease in engine power.

3

5

Share

What Are the Symptoms of a Faulty Fuel Pump Solenoid Valve?

Electromagnetic valves are industrial devices controlled by electromagnetism. Below is relevant information about fuel pump solenoid valves: 1. Solenoid valves can work with different circuits to achieve the desired control, ensuring both precision and flexibility in operation. 2. Inside the solenoid valve, there is a sealed chamber with openings at different positions, each connected to a different oil pipe. The chamber contains a piston in the middle, with electromagnets on both sides. When the coil of one electromagnet is energized, the valve body is attracted to that side, thereby controlling the movement of the valve body to open or close different oil discharge ports. The oil inlet port remains normally open, allowing hydraulic oil to enter different discharge pipes. The oil pressure then drives the piston in the cylinder, which in turn moves the piston rod, and the piston rod drives the mechanical device. In this way, controlling the current to the electromagnets regulates the mechanical movement.

9

1

Share

What does 'front' mean on a car's air conditioner?

What are the body dimensions of the Trumpchi GE3?

How to Prevent Rolling Back on Steep Slopes?

How to Reset the Maintenance Light on a Corolla?

How often should antifreeze be completely replaced?

How Often Should the Fuel Filter in a Car Be Replaced?

What Are the Symptoms of a Faulty Fuel Pump Solenoid Valve?

How many kilometers can a run-flat tire drive without air?

Why is Fuel Consumption Increasing?

What is the actual fuel consumption of the Envision S?

Does Crystal Coating Damage Car Paint?