What does front mean?

1 Answers
RhettDella
07/24/25 8:53pm
On a car's air conditioning system, "front" refers to the function of defogging the front windshield. It is usually represented by a fan-shaped symbol with several upward wavy arrows and the word "FRONT" at the bottom. Similarly, "REAR" indicates the button for defogging the rear windshield. Here are some additional details: 1. While driving, when there is a significant temperature difference between the inside and outside of the car, fog may form on the windshield, which can severely obstruct the driver's view. In such cases, you can press either the "FRONT" or "REAR" button, depending on whether the fog is on the front or rear windshield, to remove the fog. 2. When driving, it's also important to pay attention to the use of the internal and external air circulation systems. If you're driving for an extended period, it's advisable not to keep the internal circulation on continuously, as this prevents fresh air from entering the car, which is not good for the occupants.
Was this review help?
13
0
Share
More Forum Discussions

What causes the abnormal noise in Xpeng P7?

While driving, abnormal noises inside the car are inevitable. Some car owners find it too troublesome to go for maintenance and choose to ignore the noise from the car body. The reasons for the abnormal noise in Xpeng P7 are: 1. The belt slipping on the generator: Intense friction and vibration between the belt and the pulley produce a certain frequency of noise. Belt slippage might be due to a loose belt, so it's necessary to check it at a repair shop in time. 2. Usually, it's the sound from the valves: After the car has been parked for a long time, the engine oil will return to the bottom, meaning the top of the engine, i.e., the valve chamber, will lack oil. Since the valves lack the sealing and lubrication from the oil, you will hear a lot of noise when starting the car the next morning.
13
4
Share

What are the differences between the Polo and the Golf?

The Golf and Polo are not in the same vehicle class. Below are the differences between the Golf and Polo: 1. Body dimensions: Polo: 4053/1740/1449mm, with a wheelbase of 2564mm. Golf: 4259/1799/1476mm, with a wheelbase of 2637mm. 2. Powertrain: Polo: 1.5-liter naturally aspirated four-cylinder engine. Golf: One variant features a 1.2-liter turbocharged engine, while another has a 1.4-liter turbocharged engine. 3. Exterior design: Golf: LED headlights adopt a new 'double L' shape, and LED daytime running lights come as standard across the range, enhancing the overall premium feel. Polo: The body is relatively heavier, offering good safety, with a stylish and sporty appearance.
1
0
Share

What is the reason for three car windows not responding after replacing the battery?

The reasons for three car windows not responding after replacing the battery: the window control lock is locked, wiring issues, or abnormal door control module. Window control lock is locked: The window control lock on the driver's side is locked. Press and hold the button to lower the window to the bottom, keep it for a few seconds, then raise the window to the top and hold it for a few more seconds. Wiring issues: If it's a wiring issue, you need to go to a 4S shop or a professional electrical repair shop for maintenance. Abnormal door control module: If the window lift control button malfunctions or the battery power is insufficient, etc., after disconnecting and reconnecting the car battery, the automatic lift function of the electric window lift may temporarily fail.
9
2
Share

Can Soundproof Cotton Still Be Used After Getting Wet?

Soundproof cotton that has gotten wet needs to be replaced promptly. The ingress of water into the soundproof cotton may be due to poor vehicle sealing. Check the following aspects: 1. Aging sealing strips: Whether the sealing strips are aged, cracked, or incomplete, leading to poor sealing and water ingress. 2. Damaged waterproof membrane: Check if the waterproof membrane inside the rear door trim panel is damaged. Recall whether any repairs or modifications were previously done that might have affected the waterproof membrane. 3. Clogged drainage holes: Check if the drainage holes on both sides of the sunroof are clogged. If clogged, rainwater cannot drain through the pipes, causing the water level to rise continuously. When the water level reaches a certain height, it will flow along the headliner to the sealing strips and eventually onto the floor soundproof cotton.
7
3
Share

Is it serious when the airbag deploys?

It is serious when the airbag deploys, as the airbag is already damaged and must be replaced. Here is an introduction to airbags: 1. Main components: The airbag mainly consists of an airbag sensor, an anti-collision airbag, and an electronic control device. The driver-side anti-collision airbag is installed in the steering wheel, while the passenger-side anti-collision airbag is usually installed on the dashboard. The airbag sensors are installed on the left, right, and middle partitions of the driver's compartment; the middle airbag sensor and the airbag system are installed together with the electronic control device. 2. Function: The airbag evenly distributes the impact force on the head and chest, preventing fragile passengers from directly colliding with the car body and significantly reducing the possibility of injury. Airbags are indeed effective in protecting passengers during frontal collisions.
17
3
Share

Should You Lightly or Heavily Press the Brake When Shifting Gears?

If it is an automatic transmission car, you only need to release the accelerator when shifting gears, and manual shifting is not required. If shifting from P gear to D gear, you need to gently press the brake. When encountering road conditions, you should first press the brake and then downshift. Introduction to Brakes: The braking system of a car generates friction between the brake pads and the wheel hub or chassis. During the friction process, the kinetic energy of the car's movement is converted into heat energy and consumed, reducing the car's speed until it stops. Principle of Brakes: When the piston in the cylinder is acted upon by the push rod of the brake pedal, the brake oil in the cylinder is transmitted to the sub-cylinders of each tire, which is achieved through the brake pump.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.