What does free charging for XPeng P7 mean?

Is it okay not to repair if the airbag light stays on?

It is not always necessary to repair if the airbag light stays on, but it depends on the specific situation. Reasons why the airbag light is on: It may be due to the frequent loosening of the airbag connector under the seat, which usually causes the airbag indicator light to turn on. However, the airbag indicator light being on could also indicate a fault in the airbag system. It is recommended to have it checked at a 4S shop or repair shop. Impact of the airbag light being on: The airbag light being on will not affect other functions of the vehicle, so the vehicle can still be driven. However, it is not advisable to drive when the airbag light is on, as it could be caused by a fault in the sensor, processor, electronic control unit, airbag, or airbag module. In such cases, the airbag may not be triggered and will not provide protection in the event of an accident.

11

3

Share

How to reset the tire pressure warning after changing tires?

After changing tires, the tire pressure warning needs to be reset by performing a tire pressure reset operation. This is a procedure to recalibrate the tire pressure monitoring system after addressing any tire pressure issues. The steps for tire pressure reset are as follows: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the completion of the tire pressure reset. There are generally three reasons for abnormal tire pressure warnings: Abnormal tire pressure: The system typically triggers a warning when the pressure is below 1.8 bar or above 3.0 bar. In such cases, the tires need to be checked and the pressure adjusted accordingly. Tire pressure monitoring not reset: If the tire pressure monitoring system is not reset after inflating the tires, it will continue to display the old data, causing the tire pressure warning light to stay on. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire valve. If the sensor is damaged during driving, it can also trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.

18

5

Share

How to start a Xiaomianyang electric scooter?

Before starting the Xiaomianyang electric scooter, first turn it on with the key, then gradually increase speed, avoiding excessive acceleration. Method to start a Xiaomianyang electric scooter: First turn it on with the key, then gradually increase speed. Remember that pulling the handle towards you accelerates, but avoid excessive acceleration as it may make it difficult to maintain balance. Introduction to Xiaomianyang electric scooter: The Xiaomianyang electric scooter is a new energy electric vehicle under Yadea. Yadea is committed to providing consumers with products and services that bring happiness. After more than a decade of development, it has become a high-end electric vehicle manufacturer engaged in the research, production, and sales of electric bicycles, electric motorcycles, and their components. With the mission of "manufacturing products that bring happiness to consumers and returning to the joy of riding," Yadea leverages better design, higher technology, superior quality, refined manufacturing, and excellent service to export to 66 countries including the United States and Germany. It has led the high-end sales market for 10 consecutive years.

13

0

Share

How many liters of fuel can a 60-liter fuel tank hold at most?

A 60-liter fuel tank can hold up to 75 liters of fuel. Fuel filling standards: The accuracy of fuel filling cannot be determined based on the rated capacity of the fuel tank. Automotive fuel tanks are containers and are not classified as measuring instruments by national regulations, hence they cannot serve as a basis for judging measurement accuracy. According to mandatory national standards, the rated capacity of an automotive fuel tank should be controlled at 95% of its maximum safe capacity. The fuel gauge on the dashboard is not a reliable indicator either, as most vehicle fuel gauges operate via a float inside the tank that moves an electronic sensor. This sensor sends electronic signals to the gauge needle, displaying the fuel level with significant potential for error. The markings on the fuel gauge do not accurately reflect the actual fuel quantity in the tank. Hazards of overfilling the fuel tank: Overfilling a vehicle's fuel tank can first lead to fuel leakage, potentially causing a fire. Secondly, it can easily block the tank's vent hole. Once the vent is blocked, negative pressure develops inside the tank, leading to poor fuel supply or even a complete cutoff. Thirdly, it can damage the carbon canister. If the tank is overfilled, liquid gasoline instead of vapor may enter the carbon canister, causing harm to this component.

4

0

Share

Does Starting an Automatic Car Without Pressing the Brake Damage the Vehicle?

Starting an automatic car without pressing the brake does not damage the vehicle. Conditions for pressing the brake: Currently, automatic cars have two design modes: one requires pressing the brake to start, while the other does not. It depends on the specific model. Generally, most automatic cars do not require pressing the brake when starting, except when in N (Neutral) gear without the handbrake engaged. In such cases, it is advisable to apply the brake for safety reasons. Purpose of pressing the brake: For safety, it is essential to press the brake and develop this habit. The working principle of an automatic transmission is that when starting in P (Park) gear, you must press the brake to shift into any other gear. Without pressing the brake, the gear lever cannot be moved due to a built-in safety lock mechanism.

5

1

Share

What is the reason for Adient's withdrawal from Yanfeng?

Adient withdrew from Yanfeng due to strategic adjustments. Adient's business scope: To make investments in accordance with the law in the fields of automotive parts, aircraft parts, train parts, and other areas where foreign investment is permitted by the state; to assist or act as an agent for its invested enterprises in purchasing machinery, office equipment, raw materials, components, and parts required for production from domestic and international markets, and to sell the products manufactured by its invested enterprises domestically and internationally, while providing after-sales services; to balance foreign exchange among its invested enterprises with the consent and supervision of the foreign exchange management authorities; to provide technical support, employee training, and internal human resources management services for its invested enterprises during product production, sales, and market development; to assist its invested enterprises in seeking loans and providing guarantees; to establish research and development centers or departments in China to engage in the research and development of new products and high-tech, transfer its R&D achievements, and provide corresponding technical services; to provide consulting services for its investors and market information, investment policies, and other consulting services related to investments for its affiliated companies; to undertake service outsourcing business for its parent company and affiliated companies; to engage in the wholesale, import and export, and commission agency (excluding auction) of automotive parts and accessories, interior parts, aircraft parts, and train parts, and to provide related supporting services. Introduction to Yanfeng: As an independent automotive parts supplier, Yanfeng has established factories in major automotive manufacturer clusters across the country to provide customers with zero-distance just-in-time supply and services. At the same time, the company has also entered the global procurement systems of many multinational automotive enterprises, providing international customers with products and services that exceed expectations.

7

0

Share

What does free charging for XPeng P7 mean?

Is it okay not to repair if the airbag light stays on?

How to reset the tire pressure warning after changing tires?

How to start a Xiaomianyang electric scooter?

How many liters of fuel can a 60-liter fuel tank hold at most?

Does Starting an Automatic Car Without Pressing the Brake Damage the Vehicle?

What is the reason for Adient's withdrawal from Yanfeng?

At what millimeter thickness must brake pads be replaced?

What is the correct way to connect car battery cables?

What Causes Idle Shaking When the Car Gets Hot?

How to Handle Traffic Violation Points on Mobile Phone?