What does 'forged' mean on a wheel hub?

What Causes the Sudden Jerking When Starting an Automatic Transmission Car?

Experiencing jerking when releasing the brake during start-up can be attributed to several factors. For instance, internal transmission issues, such as excessive wear leading to gaps, can cause looseness during start-up, resulting in a jerking sensation. The best solution to such problems is to replace the transmission fluid and perform a comprehensive transmission maintenance. Additionally, avoid aggressive driving in daily use to prevent accelerated transmission wear. This phenomenon is quite common in high-performance vehicles with significant horsepower, especially those equipped with AT transmissions. During rapid acceleration, the engine speed increases extremely quickly, causing a noticeable impact when shifting from 1st to 2nd gear. Particularly when the throttle is pressed hard, raising the engine speed to five or six thousand RPM or even higher, the transmission must abruptly reduce the speed from five or six thousand RPM to two or three thousand RPM to ensure smooth engine operation. This sudden reduction in speed generates the impact, which is the so-called jerking sensation. However, during rapid acceleration, the jerking sensation in lower gears becomes significantly more pronounced.

12

4

Share

What Causes a Sudden Increase in Vehicle Fuel Consumption?

Engine carbon deposits, spark plug failure, and sensor malfunctions can cause a sudden increase in vehicle fuel consumption. Engine Carbon Deposits: During prolonged vehicle operation, gasoline combustion inevitably produces carbon deposits and sludge. If these deposits and sludge are not cleaned promptly, they can lead to increased fuel consumption. Spark Plug Failure: The role of a car's spark plug is to generate an electric spark with high voltage to ignite the air-fuel mixture. If the spark plug is damaged, the ignition energy decreases, resulting in uneven combustion of the mixture, which slows down acceleration and increases fuel consumption. Sensor Malfunction: Sensor malfunctions are also a major cause of increased fuel consumption. For example, when the coolant temperature sensor fails, the engine may mistakenly assume the vehicle is in a cold state, continuously sending signals to inject more fuel, thereby increasing fuel consumption. Solutions for Sudden Increase in Fuel Consumption: Engine carbon deposits require timely cleaning. Spark plug failure necessitates prompt inspection and replacement. Sensor malfunctions should be repaired or replaced as soon as possible.

18

0

Share

What is the impact of seat height on reference points in Subject 2?

Subject 2 seat height mainly affects the timing of operations. After adjusting the seat, the reference points will change, which significantly impacts Subject 2 performance. Maneuvers such as hill starts, right-angle turns, S-curve driving, reverse parking, and parallel parking all rely on reference points. Generally, if the seat is raised, the timing of each operation needs to be delayed; if the seat is lowered, the timing can be adjusted earlier. It is recommended to fix a position when learning to drive and adjust it to a familiar and comfortable position during practice. When candidates begin the Subject 2 test, they should first adjust the seat so that there is at least a fist's distance between the head and the roof of the car. It is essential to remember the number of notches moved forward or backward, and the backrest must be at a 90-degree angle to the seat. The distance between the top of the head and the car roof can be measured with fingers or tools. When the foot presses the brake pedal to the deepest point, the leg should still have a slight bend, indicating the seat's optimal position.

10

5

Share

Is the driving test fee paid by oneself?

Driving test fees are paid by the driving school. The fee you pay when registering at the driving school already includes the examination fee. All subsequent fees are already covered and are fully handled by the driving school. However, retake fees are not included and require separate scheduling. Below is the detailed information: 1. Driving school registration time: Registering for a motor vehicle driver's license at a driving school takes about half an hour to complete. After registration, wait for the driving school's notification for a medical examination. Once the medical examination is completed, proceed with the study for the driver's license theory test (Subject 1). After completing the required study hours, you can take the test. Other test subjects must be completed in the same order. The medical examination does not need to be repeated within six months. 2. Time to obtain a motor vehicle driver's license: Under normal circumstances, it takes about 45 days to obtain a motor vehicle driver's license, with a maximum time limit of three years starting from the completion of the Subject 1 test. If the time limit is exceeded, the qualification for the driver's license test will be canceled, and you will no longer be able to take the test.

14

0

Share

How many days after failing the subject 2 test can you schedule a retake?

If you fail the subject 2 test, you need to wait 10 days before you can schedule a retake. For the subject 2 test, if you fail the first attempt, you are allowed one retake. However, if you do not take the retake or fail the retake, the current test session ends, and the applicant must schedule a new test after 10 days. Within the validity period of the driving skills test permit, the number of times you can schedule the subject 2 and subject 3 road driving skills tests cannot exceed five. If you fail the fifth scheduled test, the passing scores of other subjects you have already passed will be invalidated. Passing criteria for subject 2: The full score is 100 points, with evaluation standards set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following conditions are met: For large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; for other vehicle types, a score of 80 or above is required.

10

5

Share

Why Does the Exam Car Stall Easily?

The reason why the exam car stalls easily is that the clutch pedal is lifted too quickly, and the vehicle's throttle is not pressed in time, increasing the engine load and causing the stall. During the motor vehicle driver's license test, it is essential to pay attention to lifting the clutch pedal slowly to ensure the normal power output of the vehicle's engine and avoid stalling. The clutch pedal of a motor vehicle is the control device for the manual transmission car's clutch assembly, serving as the human-machine interface for the driver. When operating the vehicle, the clutch pedal must be used. The quality of clutch pedal control is closely related to the vehicle's driving performance. Therefore, drivers must learn to operate the clutch correctly during practice. Additionally, if the car lacks sufficient power and the examinee reacts too slowly, it is advisable to park in first gear on a slope. When starting, quickly press the clutch to shift gears while simultaneously accelerating to prevent rolling back. To avoid stalling, sufficient speed and power are required. One of the most likely causes is that the handbrake is not fully released, leading to frequent stalling. If this possibility is ruled out, the issue may lie with the car's clutch. In such cases, the examinee can request the examiner for a vehicle change.

9

0

Share

What does 'forged' mean on a wheel hub?

What Causes the Sudden Jerking When Starting an Automatic Transmission Car?

What Causes a Sudden Increase in Vehicle Fuel Consumption?

What is the impact of seat height on reference points in Subject 2?

Is the driving test fee paid by oneself?

How many days after failing the subject 2 test can you schedule a retake?

Why Does the Exam Car Stall Easily?

What are the reasons for a car stalling?

What is the fuel tank capacity of the GAC Trumpchi GS4?

What Type of Gasoline Should a Corolla Use?

Why is the left turn signal blinking faster?