What does 'folder' mean in a car in Chinese?

1 Answers
RafaelLynn
08/31/25 4:01am
The 'folder' button on the car radio means folder, and it is used to switch between folders. Press the 'folder' down button once, and it will automatically jump to the next folder. Below is an introduction to other buttons in the car: 1. A-OFF: This is the button to turn off the engine auto start-stop. Most car owners are accustomed to auto start-stop in daily use because it can save energy in actual driving. However, it is not suitable for all road conditions. In some congested or waterlogged sections, this button should be used to turn off the function to ensure normal engine output and avoid major losses for minor gains. 2. AUTOHOLD: The auto hold button is usually located next to the electronic handbrake. When encountering traffic lights or temporary stops, using this button will temporarily shut down the car automatically. Similar to the auto start-stop function, its advantage is that you can release your right foot directly in D gear, which is especially useful on slopes. If you want to start, lightly press the accelerator, and the parking system will automatically release. 3. DUAL: DUAL is the air conditioning zone control button. After pressing this button, the indicator light will turn on, and you can set the air conditioning temperature for the driver and passenger areas. After adjusting to the desired temperature, turn off this button, and the automatic air conditioning will adjust the temperature according to the set values.
Was this review help?
6
2
Share
More Forum Discussions

How to reattach a sagging car headliner?

Detachment at the edges of the headliner may be caused by aging of the fabric sponge, leading to edge separation. This issue is relatively easy to fix. You can use specialized headliner adhesive by applying it along the detached edge, waiting a few minutes for the glue to dry and harden, then pressing it back into place. Here are several common headliner problems: 1. Edge detachment: This often occurs due to aging of the fabric sponge. Special automotive adhesive or bonding products can be used for direct reattachment. 2. Bubbling/air pockets: Bubbling is mostly caused by frequent sun exposure and aging, where the inner sponge has delaminated. For headliner bubbling, it's recommended to visit an auto repair shop. Small bubbles can be temporarily fixed with thumbtacks, while larger central bubbles require professional removal and reattachment of the entire headliner by a technician.
15
0
Share

What are the memorization tips for driving test subject one?

Subject one memorization tips include: two suspensions, three revocations, five drunk driving escapes result in a lifetime ban; observe left and right when overtaking from the left; no parking within 50 meters of intersections, turns, narrow roads, tunnels, bridges, slopes, or railway crossings; driver's license renewal within 90 days, changes must be reported within 30 days; turning vehicles yield to straight-moving vehicles, vehicles from the right have the right of way, right-turning vehicles yield to left-turning vehicles. There are no violations, only illegal acts; traffic police gestures take precedence over traffic signals. Other memorization methods for subject one: 1. Prohibited actions: must not, should not, cannot, strictly prohibited, stop immediately, should. 2. Let others go first: yield by slowing down, yield by stopping, give way politely, avoid by slowing down. 3. Pass slowly: pass slowly, slow down, steady, gradually, pass slowly, reduce speed, descend at a constant speed. 4. Need to observe: observe in advance, observe carefully, observe attentively, keep a lookout. 5. Ensure safety: intermittent light braking, ensure safety, guarantee safety, pass safely.
2
2
Share

What Could Be the Problem If the Car Doesn't Auto-Lock?

There are several possibilities why a car doesn't auto-lock while driving: 1. The car model you purchased may not have the auto-locking feature. 2. Auto-locking has speed conditions, generally above 15 km/h, and for some cars above 20 km/h. The speed may not have met the locking condition. 3. The auto-lock function might have been turned off in the car's computer. You can try resetting it. 4. It could be a program malfunction, requiring a check-up at the service center. It's important to note that the auto-locking feature while driving poses significant safety risks. In the event of a collision during driving, passengers inside the car may not have enough time to unlock the doors. In severe accidents, passengers may become unconscious. If the car locks remain closed, rescuers won't be able to open the doors, which could hinder timely rescue efforts. In case of a fire, the consequences could be even more dire.
5
1
Share

Does Turning Off Traction Control Save Fuel?

It does not save fuel. The function of traction control is to prevent the drive wheels from spinning when the vehicle is driving on slippery surfaces such as snow, allowing the vehicle to start and accelerate smoothly. This system primarily limits the engine's torque output to minimize the risk of skidding and loss of control, which is unrelated to fuel consumption and does not result in fuel savings. The functions of the traction control system are as follows: 1. Preventing vehicle skidding: Cars are prone to skidding when driving on wet surfaces, and the process of starting and accelerating can lead to loss of control. If equipped with a traction control system, this situation can be avoided. When signs of skidding are detected, sensors send signals to the ECU, which processes the signals to prevent the vehicle from skidding. 2. Enhancing safety performance: When used in conjunction with ABS (Anti-lock Braking System), the traction control system further improves the vehicle's safety. The traction control system and ABS can share wheel speed sensors on the axle and connect to the vehicle's computer to continuously monitor the speed of each wheel. If skidding is detected at low speeds, the traction control system immediately instructs the ABS to act, reducing wheel skidding. If skidding is detected at high speeds, the traction control system sends commands to the vehicle's computer to reduce engine speed or downshift the transmission, preventing the wheels from skidding and avoiding loss of control or fishtailing.
6
2
Share

What is the ignition point of diesel fuel?

Ignition point, also known as the fire point, for diesel fuel is 220°C. Below is additional information: 1. Concept of ignition point: The ignition point of a substance refers to the minimum temperature at which the substance begins and continues to burn when heated in the air. The data shown in the table may vary slightly depending on the shape of the sample and the measurement method. Ignition point (fire point)-----For gases, liquids, and solid combustibles coexisting with air, when a certain temperature is reached, they will spontaneously ignite upon contact with a fire source. After the fire source is removed, the minimum temperature at which the substance can continue to burn is called the ignition point or fire point of the substance. 2. Concept of diesel fuel: Diesel is a light petroleum product, a complex mixture of hydrocarbons (carbon atoms ranging from about 10 to 22). It is used as fuel for diesel engines. It is mainly produced by blending diesel fractions obtained from processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking; it can also be produced from shale oil processing and coal liquefaction. It is divided into two main categories: light diesel (boiling range approximately 180~370°C) and heavy diesel (boiling range approximately 350~410°C). It is widely used in large vehicles, railway locomotives, and ships.
14
1
Share

How to Determine When a Car is in the Semi-Engaged Clutch State?

You can determine when a car is in the semi-engaged clutch state through the following six methods: 1. Listen for changes in engine sound: When the clutch reaches the initial point of power transmission, the engine sound begins to lower, especially under heavier vehicle loads, where the change is more noticeable. 2. Feel the engine vibration: As the clutch is lifted to the semi-engaged position, the car transitions from stationary to moving with a slight vibration, indicating the clutch is precisely in the semi-engaged state. 3. Rely on pedal feedback: When the engine sound starts to change and the vehicle experiences a slight vibration, the clutch pedal will also give a pushing sensation against your foot, confirming the clutch is in the semi-engaged state. 4. Monitor the tachometer: Observe the engine tachometer. If the RPM drops noticeably as you lift the clutch, it indicates the clutch has reached the semi-engagement point. 5. Sense the vehicle's momentum: When the clutch is lifted to the semi-engagement point, the vehicle will exhibit a slight forward lurch. 6. Using a combination of auditory and tactile senses is a highly effective way to locate the semi-engagement position.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.