What does fault code C0061 mean?

1 Answers
VincentAnn
07/30/25 12:18am
C0061 fault code indicates a malfunction in the lateral acceleration sensor. Here is an introduction to the lateral acceleration sensor: 1. In the Electronic Stability Program (ESP), the lateral acceleration sensor is used to measure the vehicle's lateral acceleration. Lateral acceleration refers to a key parameter related to the centrifugal force generated when the vehicle is turning. 2. Vehicle lateral acceleration refers to the acceleration perpendicular to the driving direction, which is caused by centrifugal force during turning maneuvers. Essentially, it represents the tendency of the car to be "thrown outward." The greater this acceleration, the more likely the vehicle is to deviate from its intended path. 3. The measurement principle of the lateral acceleration sensor is based on a deflection-extended mass system with capacitive detectors. Voltage is supplied by the ESP control unit. During turns, the generated lateral acceleration causes the mass element to overcome the force of the elastic rod, moving from its neutral position to a position corresponding to the lateral acceleration value. 4. Acceleration refers to the rate of change in velocity. Acceleration does not equate to speed. The function of this sensor is to measure acceleration, transmit the signal to the ECU for analysis, and then the ECU sends signals to relevant actuators to adjust the vehicle's driving state.
Was this review help?
4
5
Share
More Forum Discussions

Why is coolant leakage more common in winter?

The reason why coolant leaks more easily in winter is: frequent use of the heater in winter causes the coolant to evaporate and decrease in volume. Composition of coolant: The main components of coolant are: 50% purified water, 40% methanol, and 10% other substances. Types of coolant: Coolants are generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. Can different coolants be mixed? It is necessary to use the same brand of coolant. Different brands of coolant may have different production formulas. If mixed, chemical reactions between various additives are likely to occur, rendering the additives ineffective. How to choose coolant: The basic indicators of coolant are freezing point and boiling point. The freezing points of coolants available on the market include -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region.
8
2
Share

Can I wear earrings in my driver's license photo?

Earrings are not allowed in driver's license photos. The relevant regulations are as follows: 1. The ID photo should be a frontal portrait, with the head and face not tilted or turned sideways when taken; 2. If there is sweat or oil on the face when taking the photo, a small amount of powder should be applied to the face; 3. Dark-colored collared clothing is required for the photo. Those wearing light-colored clothes should put on the dark-colored clothing provided by the photography site; 4. Colored glasses are not allowed. If glasses are worn, they must be made of special non-reflective materials. If there is reflection, please wear the frames provided by the photography site; 5. Hair should be neatly arranged before taking the photo. Those with long hair should expose both ears and eyebrows. Long buns should not be tied on top of the head to avoid affecting the image quality; 6. Various accessories such as earrings and hairpins are not allowed when taking the photo; 7. Heavy makeup is not allowed when taking the photo; 8. Hats are not allowed when taking the photo.
1
2
Share

What is the fuel tank capacity of the 2014 Buick Regal?

2014 Buick LaCrosse has a fuel tank capacity of 70 liters, using No. 92 or above unleaded gasoline. It is a mid-size car under SAIC-GM Buick. Among similar models, the Magotan has a fuel tank capacity of 66 liters, and the Audi A4 has a fuel tank capacity of 65 liters. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and steam valves, also check if the vent holes are clear. The filter screen at the fuel filler port should be kept intact to prevent impurities from entering the fuel tank during refueling and clogging the fuel lines. The sealing gasket of the fuel filler cap should also be intact to prevent fuel from overflowing during driving.
5
0
Share

What type of engine oil is used in the Great Wall Pao diesel version?

The Great Wall Pao diesel version uses engine oil with the specification 5W-40. Engine oil, also known as motor lubricant, serves multiple functions such as lubrication to reduce friction, assisting in cooling, sealing to prevent leaks, rust and corrosion prevention, and shock absorption. Usage scenarios for different engine oil specifications: High-temperature types for summer use: 20, 30, 40, 50. The larger the number, the higher the viscosity, and the higher the maximum applicable temperature. Low-temperature types for winter use: 0W, 5W, 10W, 15W, 20W, 25W. The 'W' stands for Winter, and the smaller the number before 'W,' the lower the low-temperature viscosity and the better the low-temperature fluidity, making it suitable for lower minimum temperatures. All-season types for both winter and summer use: 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, 10W-30, 10W-40, 10W-50, etc. The smaller the number before 'W,' the lower the minimum applicable temperature, and the larger the number after the hyphen, the higher the maximum applicable temperature.
16
3
Share

Can Wheel Hub Bolt Patterns Be Modified If They Are Different?

Wheel hub bolt patterns cannot be modified if they are different. When replacing wheel hubs, the bolt pattern values must be identical for the modification to be feasible. If the wheel hub's bolt pattern does not match the car's specifications and there is no access to a professional machining center or specialized bolt pattern drill bits, the drilled holes may not fit properly. Additionally, drilling extra holes in the wheel hub could compromise its strength, creating potential safety hazards. Methods for maintaining wheel hubs include: 1. Choosing the right cleaning agent—household cleaners and common dishwashing detergents on the market, being either alkaline or acidic, can be highly corrosive to the wheel hub surface. Opt for neutral soapy water for cleaning to avoid exposing the wheels to strong chemicals; 2. Avoid cleaning when the wheel hub is too hot—never use cold water directly to clean a hot wheel hub. Wait for it to cool down naturally; 3. Develop good driving habits—pay attention to low obstacles on the road during daily driving and avoid parking too close to the curb.
9
1
Share

Is Annual Inspection Still Required for a Long-Term Valid Driver's License?

Even if a driver's license is long-term valid, it still requires an annual inspection, unless the vehicle has no demerit points recorded within a scoring cycle, in which case the inspection for that cycle can be waived. Additionally, holders of a C1 long-term driver's license who have not accumulated more than 12 demerit points within a scoring cycle are also exempt from the inspection for that cycle. Relevant details are as follows: 1. License Renewal: If a driver has not reached 12 demerit points in any scoring cycle during the 6-year validity period of their driver's license, they can renew it for a 10-year validity period. Similarly, if they maintain this record during the 10-year validity period, they can renew it for a long-term valid driver's license. When renewing the driver's license, the traffic management department of the public security authority must conduct an inspection. 2. Inspection: Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks must undergo an inspection at the traffic management department of the public security authority within 30 days after the end of each scoring cycle. However, if there are no demerit points recorded within a scoring cycle, the inspection for that cycle is waived.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.