What does f.xsport mean?

Is the Geely Emgrand GS's 100-car failure rate high?

Geely Emgrand GS has a very low 100-car failure rate. Below is an introduction to the Geely Emgrand GS: 1. Introduction: The Emgrand GS is a crossover SUV developed by Geely Auto, adhering to the brand mission of "building everyone's premium car" and based on the "premium car development strategy." 2. Model: The Geely Emgrand GS was born on Geely's new FE platform, belonging to the third-generation products under Geely's development strategy, alongside the Borui and Boyue. The letter "G" in the Emgrand GS name stands for "Grand," interpreting its larger body size and space. The letter "S" represents "Sporty," as the Emgrand GS's design incorporates the crossover SUV style of the "sports mimicry design aesthetics" concept. 3. Exterior: The new Emgrand GS 2020 continues the "new sports mimicry aesthetics" design concept, offering two styles: the "Dynamic" version and the "Elegant" version, presenting two different design styles—sporty and sharp, and fashionable and elegant—providing users with more diverse personalized choices.

18

3

Share

What is the reason for the acceleration hesitation in the Changan CS75?

The reason for the hesitation during acceleration in the Changan CS75 may be due to excessive carbon buildup in the throttle body, fuel injectors, and intake manifold. Many malfunctions are caused by carbon buildup, and some vehicles experience hesitation as a result. It is recommended to regularly clean the carbon deposits. Below is some relevant information about the Changan CS75: 1. Introduction to the Changan CS75: The Changan CS75 is a compact SUV under the Changan brand, equipped with a 1.5-liter turbocharged engine across all models. The dimensions of the Changan CS75 are 4650 mm in length, 1850 mm in width, 1705 mm in height, with a wheelbase of 2700 mm. 2. Improving fuel economy: Maintain tire pressure at the normal level, as low tire pressure increases the vehicle's resistance, thereby increasing fuel consumption. Maintaining the recommended tire pressure can reduce fuel consumption by an average of 3.3% compared to underinflated tires.

12

0

Share

What is the reason for the abnormal noise when shifting from first gear to second gear in Lavida?

The reason for the abnormal noise when shifting from first gear to second gear while stepping on the clutch may be that the manual transmission car is relatively old, and whether the shifting mechanism has become loose. Check if the shift ball head and gear locking mechanism have become loose or produce abnormal noise. Sometimes, when the weather is cold, the vehicle may emit a sharp abnormal noise after shifting. Gear introduction: 1. First gear: It is the starting gear, the gear for starting the car. The gear ratio is similar to that of the reverse gear, with basically the same performance, so it is not suitable for continuous high-speed operation. Generally, after the car starts moving and gains inertia, you can shift into second gear. 2. Second gear: It is the passing gear, mainly used for navigating complex road conditions and handling complicated situations, such as sharp-angle (right-angle) turns without special obstacles, crowded and bustling sections, steep slopes, and bumpy roads. 3. Third gear: It is the transition gear, mainly used for low-speed driving on urban roads. Depending on the situation, you can conveniently accelerate to shift into fourth gear or decelerate to shift down to second gear.

9

4

Share

What does it mean when there is abnormal noise from the exhaust pipe at idle?

If there is a "popping" sound from the exhaust pipe when the vehicle is idling, it may be caused by damage to the exhaust pipe. The detailed reasons are as follows: Excessively rich air-fuel mixture: If the air-fuel mixture in the engine is too rich and not completely burned, it will be expelled with the exhaust gases. When the unburned mixture enters the exhaust pipe and encounters combustible air, it produces an explosive sound, leading to excessive noise from the exhaust pipe. At low engine speeds, the sound is heavy and unstable, while at high speeds, the noise from the exhaust pipe may lessen. This is also an important method to determine if an excessively rich mixture is causing the loud exhaust noise. Excessively high fuel level in the float chamber: When the fuel level in the float chamber is too high, it not only causes the air-fuel mixture to become too rich but also leads to some fuel entering the cylinder without being fully atomized, resulting in increased noise from the exhaust pipe. If a large number of oil droplets are observed in the exhaust pipe, it indicates that the fuel level in the float chamber is too high or the float chamber needle valve is not sealing properly.

16

0

Share

What is the explanation for the Toyota HV control system regeneration failure?

DPF regeneration failure light comes on because there is a large accumulation of soot in the DPF, and the DPF is close to being blocked. The following is an introduction to the working status of the DPF: 1. Automatic regeneration: The DPF indicator shows green, and no manual intervention is required at this time. This state usually occurs when the vehicle is driving at high speed (above 80km/h). Continue to maintain normal driving conditions, and the DPF indicator will automatically turn off after the particulate matter treatment is completed. 2. Manual regeneration: The DPF yellow indicator light will flash, which usually occurs when the vehicle is driving at low speed (below 80km/h). It can be operated at any time and is suitable for users who only drive in urban areas. For example, after returning home from work, when the vehicle is parked, press and hold the DPF processing button for 3-5 seconds to start the detection. If the yellow indicator light flashes, it means manual regeneration is required. In this case, press the DPF button again, and the yellow indicator light will stay on. Wait for 15-30 minutes, and when the indicator light turns off, it means the particulate matter treatment is completed.

10

4

Share

What does the car display when it is low on engine oil?

When the car is low on engine oil, it displays an oil can-shaped icon with a wavy line underneath. Below is relevant information about low engine oil: Introduction to the engine oil indicator: Engine oil is an essential medium for ensuring lubrication and cooling in a car. Once the oil level drops below the minimum limit, the engine oil warning light will illuminate. This warning light appears as an oil can-shaped icon with a wavy line underneath. Insufficient engine oil can easily cause engine damage, so it's important to pay attention to this indicator while driving. The vehicle's engine oil indicator generally comes in two types: a red warning light and a yellow warning light. Introduction to the yellow warning light: If the yellow engine oil warning light comes on while driving, it usually indicates that the engine oil level is low. When the yellow oil light turns on, you should safely pull over, open the engine hood, wait for about 3-5 minutes, then pull out the dipstick to check the oil level. If the dipstick shows that the oil level is outside the normal range, you will need to add more engine oil.

5

0

Share

What does f.xsport mean?

Is the Geely Emgrand GS's 100-car failure rate high?

What is the reason for the acceleration hesitation in the Changan CS75?

What is the reason for the abnormal noise when shifting from first gear to second gear in Lavida?

What does it mean when there is abnormal noise from the exhaust pipe at idle?

What is the explanation for the Toyota HV control system regeneration failure?

What does the car display when it is low on engine oil?

Can a Lost Mercedes Key Be Located and Retrieved?

What are the common faults of Volvo XC40?

What causes the dim yellow light in Audi A3's daytime running lights?

How to turn on the low beam lights of the Sagitar?