What does EV function limitation mean?

1 Answers
LaPeyton
07/30/25 8:39am
EV function limitation generally indicates damage to the vehicle's high-voltage system. Here is more information: 1. Handling EV function limitation: When the EV function limitation occurs in a vehicle, it should be promptly taken to a repair shop or 4S store for professional repair to avoid unnecessary troubles during vehicle use. 2. Detailed introduction of EV: EV is the English abbreviation for electric vehicle. The full name of EV on hybrid vehicles is HEV, which stands for hybrid electric vehicle. Hybrid power means the vehicle uses both gasoline and electric power for driving. The advantage is that when the vehicle starts or stops, it relies solely on the generator. The engine does not work until a certain speed is reached, thus keeping the engine always in the optimal working condition, with good power performance and very low emissions. Moreover, the source of electrical energy is the engine.
Was this review help?
1
5
Share
More Forum Discussions

Should a Fire Extinguisher Be Kept in a Car?

Yes. Some friends have asked whether a fire extinguisher should be kept in the car, and the answer is definitely yes. High temperatures, vehicle malfunctions, short circuits, etc., can easily cause a car to catch fire spontaneously. In such cases, having a fire extinguisher in the car can greatly ensure personal safety. However, there are many types of fire extinguishers, and different types are suitable for different fires. According to relevant regulations, medium and large passenger vehicles and hazardous goods transport vehicles must be equipped with fire extinguishers and firefighting equipment within their validity period. Failure to do so may result in a warning or a fine of 20 to 200 yuan. Although there is no strict requirement for private cars to carry fire extinguishers, during annual inspections, a fire extinguisher must be placed inside the vehicle; otherwise, the inspection will not pass. For safety reasons, it is recommended to carry a fire extinguisher in the car. Dry powder and water-based fire extinguishers are the best choices for vehicles. Dry powder extinguishers are fast-acting, effective, affordable, and widely applicable. Water-based extinguishers are divided into water-based clean water extinguishers, water-based foam extinguishers, and water-based fine mist extinguishers, which are dust-free, anti-suffocation, highly effective, and environmentally friendly. Generally, car fires are caused by electrical faults or fuel leaks. For electrical fires, water-based fine mist extinguishers are the best choice, while water-based foam extinguishers are ideal for fuel fires. However, dry powder extinguishers have good versatility and are suitable for both types of fires. Each type has its own advantages, and both are suitable for vehicles. The choice can be made based on specific needs. Nonetheless, more people prefer dry powder extinguishers due to their high cost-effectiveness and broad applicability. For ordinary household cars, a 1-2 kg fire extinguisher is recommended—lightweight, easy to carry, and convenient to fix in the car.
10
0
Share

What principle does the brake utilize?

The working principle of a brake is: it utilizes the mutual friction between non-rotating components connected to the vehicle body (or frame) and rotating components connected to the wheels (or drive shaft) to prevent the rotation of the wheels or the tendency to rotate. A brake is a device that functions to decelerate, stop, or maintain the stopped state of moving parts (or machinery). The brake mainly consists of a braking frame, braking components, and an operating mechanism, with some brakes also equipped with automatic adjustment devices for the gap between braking components. To reduce braking torque and structural size, brakes are usually installed on the high-speed shaft of the equipment. However, for large equipment with higher safety requirements (such as mine hoists, elevators, etc.), they should be installed on the low-speed shaft near the working part of the equipment.
5
4
Share

How to Adjust the Dashboard Clock on the New Bora?

The method to adjust the dashboard clock on the New Bora is as follows: Start the car and power on the electrical system; Press the button on the left side of the dashboard until the hour indicator on the dashboard clock starts flashing; Then press the first button on the right side of the dashboard. Each press increases the hour by one. Adjust to the correct hour and release the button; Wait until the hour display stops flashing, then press the left button again to switch to adjusting the minute display, which will start flashing; Press the first button on the right side again. Each press increases the minute by one. Adjust to the correct minute and wait until the minute display stops flashing. The New Bora has a body length, width, and height of 4663mm, 1815mm, and 1462mm respectively, with a wheelbase of 2688mm. In terms of power, it is equipped with two engines: a 1.4-liter turbocharged engine and a 1.5-liter naturally aspirated engine.
1
1
Share

What is the problem when the parking fault light comes on?

The reasons for the parking fault light to come on are: 1. The handbrake is not released or not fully released; 2. The brake or clutch fluid level is too low; 3. There may be a fault in the brake system; 4. The indicator light will also come on when the ignition switch is turned on with the parking brake engaged. There are three types of parking brakes: electronic handbrake, parking foot brake, and mechanical handbrake. Among them, the parking foot brake and mechanical handbrake basically use mechanical mechanisms to achieve parking braking, while the electronic handbrake uses an electric motor to pull the cable and lock the wheels. Brake fluid, also known as braking oil or force oil, is an indispensable part of the brake system. In the brake system, it serves as a medium for force transmission.
12
1
Share

How to Check the Production Year of a Tire?

To check the production year of a tire, you can look for the markings on the sidewall of the tire. Typically, it is represented by a four-digit number following a series of alphanumeric characters starting with "DOT," which stands for Department of Transportation certification in the United States. The last four digits indicate the production date: the first two digits represent the production week, and the last two digits represent the production year. For example, "2317" means the tire was produced in the 23rd week of 2017. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during operation. Therefore, tires must possess high load-bearing capacity, traction performance, and cushioning properties.
9
4
Share

Why is there an additional deep oil change during maintenance?

During a traditional oil change, the old oil is simply drained out without thoroughly cleaning the residual old oil, sludge, metal shavings, impurities, and oxides before adding new oil. The old oil contains a large amount of oxides, which, if not completely removed, can clog the oil pump filter screen and fine lubrication channels, preventing the oil from reaching the areas that need lubrication. Hence, a deep oil change is included in maintenance. The benefits of a deep oil change are as follows: 1. Thoroughly cleans the fuel tank and lubrication system of residual sludge and other impurities, improving lubrication effectiveness. 2. Extends the service life of the newly replaced oil. 3. Enhances the engine's lifespan.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.