What does ESS engine mean?

1 Answers
SanRyan
07/30/25 7:07am
ESP is a further extension of the functions of the Anti-lock Braking System (ABS) and Traction Control System (TCS) in automobiles, and it is also part of the vehicle's active safety system. Relevant information is as follows: 1. Composition: ESP mainly consists of three major components: sensors, actuators, and the Electronic Control Unit (ECU). Sensors generally include wheel speed sensors, steering wheel angle sensors, lateral acceleration sensors, yaw rate sensors, and brake master cylinder pressure sensors. Actuators typically include the traditional braking system (vacuum booster, pipelines, and brakes), hydraulic regulators, etc. The Electronic Control Unit works in conjunction with the engine management system to intervene and adjust the engine's power output. 2. Function: ESP is primarily used to address the risk of tailspin loss of control caused by continuous steering during emergency obstacle avoidance. When emergency avoidance is required, ESP intervenes to increase the driving wheel's rotational force; when a tailspin tendency is detected, ESP applies braking to the opposite wheel to reduce rotation, thereby helping the vehicle follow the driver's steering intentions.
Was this review help?
3
5
Share
More Forum Discussions

Does Playing Music in the Car Consume Fuel?

Playing music while driving does not consume fuel because the electricity used for the music is not drawn from the battery but from the rectified DC output of the alternator. As long as the car engine is running, the alternator is also working, so the minimal power consumption does not increase fuel usage. Fuel consumption may occur if the music volume is too loud, potentially affecting driving judgment and leading to unnecessary fuel consumption. All electrical devices in the car consume fuel, including the battery, as its power is generated and charged using fuel. A higher electrical load naturally requires the engine to inject more fuel. However, unless the car is modified, these electrical loads remain within normal operating limits. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system. When the engine is off or idling, it powers the car's electrical devices. If the alternator's output is insufficient, the battery can assist in supplying power. Additionally, it helps stabilize voltage spikes in the electrical system, protecting the car's electronic components, and stores excess electricity generated by the alternator.
6
2
Share

What Should You Pay Attention to When a Car Is Not Driven for a Long Time?

When a car is not driven for a long time, attention should be paid to appropriately increasing tire pressure and periodically charging the vehicle's battery. Appropriately increasing tire pressure: Car tires are made of rubber and can deform. When a vehicle is left unused for an extended period, the contact area between the tires and the ground remains fixed, leading to increased risk of cracking and deformation on the stressed tire surface. Therefore, to ensure tire health, it is advisable to slightly increase the tire pressure before parking the car to reduce the contact area between the tire and the ground. If possible, the owner should periodically start the car, turn the steering wheel, and change the tire position to redistribute the stress on the tire surface. Periodically charging the vehicle's battery: The car battery is a crucial component. If the battery runs out of charge, the vehicle may fail to start, affecting the owner's normal use. Even when the car is not in use, the battery continues to discharge. Therefore, it is recommended to start the car every one to two weeks, either idling in place or driving for a short distance.
20
3
Share

How to Solve the Problem of Foul Odor When Turning on the Car's Air Conditioning?

To address the foul odor when turning on the car's air conditioning, start the car, turn on the air conditioning, switch to the external circulation mode, spray a dedicated air conditioning cleaner towards the blower, close the windows and doors, switch from external to internal circulation, and let the air conditioning run for a few minutes. The foul odor when turning on the car's air conditioning may be caused by dirty air conditioning ventilation ducts or a dirty air filter. Prolonged use of the air conditioning evaporator can also lead to foul odors due to dampness and mold. It is recommended that drivers turn off the air conditioning five minutes before reaching their destination and switch to natural air. This allows the temperature inside the air conditioning ducts to rise before parking, restoring it to normal temperature. This prevents condensation due to temperature differences after parking, keeping the air conditioning ducts dry and preventing the growth of mold and fungi. Regularly replace the air filter. A dirty filter not only fails to perform its original function but also causes secondary pollution to the air entering the car. To completely eliminate odors inside the car, it is essential to address the source. Under normal conditions, an original air filter has a lifespan of one year or 30,000 kilometers. If the car is frequently driven in areas with poor air quality, the replacement cycle of the filter should be shortened accordingly.
17
5
Share

What is the RPM during clutch semi-engagement?

During semi-engagement, the RPM is equivalent to idle speed, typically ranging from 800 to 1000 RPM. If the accelerator is not pressed, this RPM will increase when the accelerator is applied. Clutch semi-engagement refers to the unstable connection state of the clutch, where the driver gradually reduces the pressure on the clutch pedal, causing the driving plate and driven plate to slip while rotating. Manual transmission vehicles often require semi-engagement for various operations, but prolonged use can lead to clutch wear. During driving tests, semi-engagement is used in the field test but is prohibited in the road test. The shorter the duration of semi-engagement, the better. Prolonged semi-engagement accelerates clutch disc wear. If frequent semi-engagement is necessary, ensure proper cooling by alternating between semi-engagement and disengagement. Avoid resting your left foot on the clutch pedal, as this keeps the clutch in semi-engagement and increases wear. Regular clutch maintenance is essential. If you notice a burning smell or difficulty shifting gears, the clutch disc may be damaged and requires immediate repair. When lifting the clutch pedal to the semi-engagement point, pause for 2-3 seconds before fully releasing it to prevent jerking or lurching.
6
1
Share

What are the length, width, and height dimensions of the XRV trunk?

The dimensions of the Honda XRV trunk are as follows: height 830mm, width 1000mm, standard depth 780mm, maximum extended depth 1720mm, with a trunk capacity ranging from 437 to 1456 liters. Below is an introduction to the Honda XRV related content: 1. Powertrain: The Honda XRV is equipped with a 1.5T turbocharged engine that meets the National VI emission standards, delivering a maximum power of 177 horsepower. The transmission system continues to be paired with a 6-speed manual and CVT gearbox. 2. Design: The rear bumper of the Honda XRV is adorned with chrome trim, enhancing its refined appearance. In terms of the exhaust system, the new model will offer either dual exhaust outlets or a single exhaust outlet, depending on the variant. The interior design of the Honda XRV continues the current model's style, featuring a clean and simple dashboard layout with reasonably arranged functional areas.
15
4
Share

Where is the largest used car market in China?

The Beijing Used Vehicle Trading Market is the largest used car trading market in China, also known as the Beijing Used Car Market. Established in 1985, it is commonly referred to as the Huaxiang Used Car Market due to its location near the Huaxiang Bridge on the South Fourth Ring Road in Beijing. Related information: 1. Introduction: A used car market is a place for the secondary circulation of motor vehicle commodities, possessing the dual attributes of intermediary service providers and commodity operators. Specifically, the functions of a used car trading market include: used car appraisal, purchase, sale, consignment, replacement, auction, transfer, registration, licensing, insurance, and other services. 2. Expansion: Additionally, used car trading markets should strictly review the legality of used car transactions in accordance with relevant national laws and regulations, resolutely preventing the trading of stolen vehicles, smuggled vehicles, illegally assembled vehicles, and vehicles with incomplete documentation and fee certificates.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.