What does ESN on the engine mean?

1 Answers
Rebecca
07/25/25 3:52am
ESN on the engine stands for Engine Serial Number. If the nameplate is missing, it can be found on the PT fuel pump side of the cylinder block, with an 8-digit number starting with 4 stamped on the upper right side of the cylinder block. Carbon deposit cleaning: Engine disassembly and cleaning is the most effective method, but the entire process requires a significant amount of time and effort. The engine needs to be disassembled, and then cleaning agents, ultrasonic methods, etc., are used to completely and thoroughly remove carbon deposits from the components. Engine maintenance: For engine maintenance, use high-quality engine oil and qualified coolant, regularly clean the radiator scale, remove carbon deposits from the car, replace the car's three filters on time, maintain a reasonable speed, and keep good driving habits since the engine is the heart of the vehicle.
Was this review help?
4
2
Share
More Forum Discussions

What Causes the ABS Light to Illuminate in a Polo?

There are various states in which the ABS light illuminates, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt off the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wires or poor contact in the ABS relay lead to signal issues, causing system failure. Solution: Check wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS light turns off. This may also occur if the ABS system power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's specified tire and wheel rim dimensions, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with a finger, then release the pedal to complete self-positioning; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's path, posing significant safety risks.
9
3
Share

What is the name of the roof window?

The roof window is called a car sunroof. The car sunroof is installed on the roof and can effectively circulate air inside the car, increasing the intake of fresh air. At the same time, the car sunroof can also meet the needs of a broad view, mobile photography, and videography. Sunroofs are roughly divided into built-in sunroofs, pop-up sunroofs, and panoramic sunroofs, as introduced below: A built-in sunroof refers to a sunroof where the sliding assembly is placed between the interior and the roof. Its advantages are a large opening and a simple, beautiful appearance. Most sedans use built-in sunroofs; A pop-up sunroof has the advantages of small size and simple structure. Additionally, the car sunroof is installed on the roof and can effectively circulate air inside the car, increasing the intake of fresh air; A car panoramic sunroof is actually relative to a regular sunroof. Panoramic sunroofs have a larger area, sometimes even an entire glass roof. The advantages of panoramic sunroofs are a broad view and good ventilation. The car sunroof changes the traditional form of ventilation. When the car is driving at high speed, air flows quickly around the car. When the sunroof is opened, a negative pressure area forms outside the car. Due to the difference in pressure inside and outside the car, the polluted air inside the car can be drawn out, achieving the purpose of ventilation. Using the sunroof to defog is a quick method. If the side windows are tightly closed while driving, the temperature difference inside and outside the car increases, making it easy for the front windshield to fog up. The driver only needs to open the roof sunroof to the rear-tilt ventilation position to easily eliminate fog on the front windshield, ensuring driving safety. When the temperature inside the car is high, opening the sunroof and using the negative pressure formed on the roof while the car is moving can quickly draw out the hot air, achieving the purpose of rapid ventilation and cooling.
19
0
Share

How to Unlock and Open a Tesla Door?

The door handles are intelligently sensor-activated. When your hand approaches the handle, it automatically extends, allowing you to simply pull the handle to open the door. If the door handle is not used within one minute after extending, it will retract. Simply press the handle once to make it extend again.
7
3
Share

How to Remove and Install the Fuel Pump on a Volvo XC60?

Use a screwdriver to pry off the fuel pump cover plate. Gently pry the clip on the side of the wiring harness with a screwdriver, remove the wiring harness connector, and disconnect the two fuel lines. Use a special tool for the pump cover to remove the sealing ring. Carefully lift the fuel pump assembly out of the fuel tank, remove the fuel float rod, and check the buoyancy of the fuel float.
5
5
Share

How to fix a hard-to-close door on a Xiali N5?

You can purchase a bottle of rust remover or grease for rust removal. Apply it evenly on the door latch and lock mechanism, then repeatedly open and close the door to ensure even lubrication. Additionally, if the door latch hook is misaligned, the entire door may need adjustment. It is recommended to visit a repair shop or 4S store for inspection and repair.
1
2
Share

How to charge a Tesla Model 3?

Tesla V3 Supercharger. The world's fastest efficiency at 250KW, with a peak efficiency of charging 400km in 15 minutes. The estimated charging time is 4-8 hours. When purchasing the vehicle, you can choose to install a charging pile in your parking space. A 3-meter-long cable can be carried around with the car, requiring a grounded power source.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.