What does EPS mean when displayed on a car?

1 Answers
OFinn
07/30/25 6:47am
EPS in cars stands for Electric-Power-Steering. Its function is to use the power generated by an electric motor to assist the driver with power steering. This system directly provides steering assistance through an electric power motor, eliminating the need for components such as a power steering pump, hoses, hydraulic fluid, drive belt, and engine-mounted pulley required in hydraulic power steering systems, thereby saving energy and protecting the environment. Here is some relevant information: 1. EPS can improve vehicle stability; when the vehicle shows signs of instability, the electronic power steering system can independently brake each wheel and participate in the engine system management to ensure driving safety. 2. The EPS system mainly consists of a speed sensor, reduction mechanism, torque sensor, electric motor, and electronic control unit.
Was this review help?
17
1
Share
More Forum Discussions

Is it normal for the Audi A6L to have an instantaneous fuel consumption of over 40?

Audi A6L's instantaneous fuel consumption of over 40 is normal because starting the car consumes more fuel. Below are the fuel consumption calculation method and fuel-saving tips: Fuel consumption calculation method: A commonly used method is to fill up the fuel tank, reset the odometer to zero, and then calculate the distance traveled when the fuel is used up. Divide the liters of fuel added by the kilometers traveled, then multiply by 100 to get the average fuel consumption per 100 kilometers. Some cars experience a slight decrease in average fuel consumption after a break-in period, which is why high-speed driving helps improve fuel efficiency. Fuel-saving tips: Press the accelerator gently, avoid rapid acceleration when starting, and accelerate slowly to effectively reduce fuel consumption. This also contributes to safe driving. Do not accelerate blindly due to time constraints. Maintain a steady speed and try to keep the vehicle speed stable.
14
0
Share

What causes the Audi A6L to shake when starting?

Audi A6L shaking when starting is caused by severe engine carbon deposits or engine misfire. Below are detailed explanations for these reasons: Severe engine carbon deposits: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits. Engine misfire: Engine misfire mainly refers to one or more cylinders not working properly. This manifests as obvious intermittency in the exhaust gas flow from the car, along with severe shaking of the exhaust pipe. The engine's shaking can be clearly felt, sometimes accompanied by abnormal noises. This is mostly related to ignition coil failure.
1
4
Share

What Causes the Audi A4 Body to Shake?

The reasons for the Audi A4 body shaking include damaged spark plugs, poor fuel quality, and excessive carbon buildup. Below are detailed explanations for these causes: Damaged Spark Plugs: The most common issue causing shaking during acceleration is damaged spark plugs. Worn electrode gaps in the spark plugs result in insufficient ignition, leading to incomplete combustion of the air-fuel mixture and causing acceleration shaking. Additionally, cracks in the ceramic part of the spark plugs can prevent ignition, causing one cylinder to misfire and resulting in acceleration shaking. Poor Fuel Quality: Low-quality gasoline can lead to poor atomization in the fuel injectors, causing incomplete combustion of the air-fuel mixture in the cylinders and resulting in shaking during acceleration. It is recommended to use higher-grade gasoline after the current tank is depleted and to perform a fuel system cleaning. Excessive Carbon Buildup: A dirty throttle body or excessive carbon buildup in the fuel injectors can cause the throttle to not close properly or the idle control motor to stick, leading to high engine idle speed. Carbon buildup generated during engine operation can also cause vehicle shaking, especially during startup when the engine shakes more than usual or even fails to start on the first attempt. Therefore, when the vehicle shakes, the throttle body and fuel injectors should be inspected first. If they are found to be dirty or have excessive carbon buildup, they should be cleaned promptly.
1
0
Share

How often does the Audi A6 undergo a generational update?

Audi A6 typically undergoes a generational update every 7 years, which is the common update cycle for most European vehicles. Vehicle Dimensions: The dimensions of the Audi A6 are 488mm in length, 1810mm in width, and 1475mm in height. The Audi A6 is a luxury vehicle produced by Audi, available in both sedan and station wagon variants. Audi A6 Features: It is characterized by being more luxurious, sportier, and more refined. The enhanced luxury is primarily reflected in features such as the BOSE sound system, TV/DVD, and refrigerator, all of which are top-tier global brands. The sportier aspect is evident in the sport seats and steering wheel, while the refinement is showcased through the Audi A6's multiple successful upgrades, which have not only set a new standard but also ensured strong reliability.
10
4
Share

What Causes the Right Front Wheel of an Audi A6 to Make Bumping Noises?

Audi A6 right front wheel bumping noises are caused by damaged stabilizer bar bushings, faulty engine guard plate, or loose shock absorber top nuts. Below are detailed explanations for each cause: Damaged Stabilizer Bar Bushings: The stabilizer bar, also known as an anti-roll bar or sway bar, has two clamps containing the bushings. Exposure to winter cold, summer heat, plus erosion from dirt and dust causes the bushings to harden with age. This leads to inconsistent wheel heights when driving on uneven roads, resulting in abnormal noises. Faulty Engine Guard Plate: The noise may come from friction between the engine guard plate and chassis, or due to loose screws on the guard plate. The solution is to remove the engine guard plate. Loose Shock Absorber Top Nuts: Open the engine hood and check the two hexagonal nuts at the upper left and right corners for looseness. Tightening these hexagonal nuts will resolve the issue.
1
2
Share

Is the Audi Q2L transmission not durable?

Audi Q2L transmission is durable. The following is a related introduction to the Q2L transmission: Q2L Transmission Power: Equipped with a top-tier 1.4T engine in its class, with a displacement of 1395mL, delivering robust power for users. Maximum power is 110kW/5000-6000rpm, and maximum torque is 250Nm/1500-3500rpm, paired with a 7-speed dual-clutch transmission. Q2L Transmission Parameters: 0-100km/h acceleration in just 8.7s, combined fuel consumption as low as 6.1L per 100km, with parameters comprehensively superior to its peers. The Q2L's power not only handles daily commutes and family trips with ease but also meets the demands of mountain driving.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.