What does EPC on the dashboard mean?

How to reset the tire pressure light on the Jade?

The method to reset the tire pressure light on the Jade is: There is a tire pressure reset button below the left side of the steering wheel. Press and hold it for a few seconds, and the tire pressure light will reset. The Jade is a compact car under Dongfeng Honda, with dimensions of 4667mm in length, 1775mm in width, and 1530mm in height, a wheelbase of 2760mm, and a body type of a 5-door, 5-seat hatchback. The transmission is a 5-speed automatic. The car is equipped with a 1.8L L4 engine with natural aspiration, producing a maximum horsepower of 141ps and a maximum torque of 174nm, with a top speed of 187 kilometers per hour.

5

0

Share

At what speed should a manual transmission car shift gears?

Manual transmission cars shift to second gear at 20 to 35 km/h; third gear at 35 to 45 km/h; fourth gear at 45 to 60 km/h; fifth gear above 60 km/h; and sixth gear at 80 km/h. A manual transmission, also known as a manual gearbox (MT), requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed variation. The working principle of a manual transmission involves using the shift fork to change the gear ratio (gear ratio) of the meshing gears, which in turn modifies the driving torque to suit different operating conditions. Since the torque converter in an automatic transmission has a limited range for automatic gear shifting and torque conversion, several rows of planetary gears are connected in series behind the turbine to improve efficiency. The hydraulic control system automatically operates the planetary gears in response to changes in engine operation, thereby achieving automatic gear shifting and torque conversion.

20

1

Share

Introduction to the Gears of Hongqi Automatic Transmission Vehicles

N gear: When in D or R gear, push the gear lever in the opposite direction of the current gear until the "N" light comes on, at which point the neutral gear is engaged; D gear: Pull the gear lever backward once, all the way down, and the "D" light on the gear lever will come on. Classification: Automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the speed and traffic conditions. Generally, automatic transmission vehicles have six gear positions, from top to bottom: P, R, N, D, S, L. Operation: Driving an automatic transmission vehicle using only the parking gear P, reverse gear R, neutral gear N, and drive gear D can fully meet the needs of general driving. However, if encountering some special driving conditions, other functional gears may be required. Therefore, if the correct control method is chosen, automatic transmission vehicles can perform better than manual transmission ones.

15

5

Share

What's the matter with the classic Focus remote key not being able to lock the car?

Insert the remote key, lower the window glass of the driver's seat, press and hold the remote unlock button, quickly turn the key from position 0 to position II (do not wait for power-on), and repeat 5 times. Service life: The battery life of the car remote key is generally about 3 years. When the battery runs out, you need to open the key shell to replace the new battery. Friends with strong hands-on ability can open the key shell and replace it by themselves, which is relatively simple. Precautions: There is a chip inside the car's remote key. During the disassembly process, be careful not to damage the chip of the remote key, otherwise it will be troublesome and expensive to replace a new chip. The shell of the remote key is generally not waterproof, so friends should never soak the remote key in water, as this will damage the chip. When using the remote key, try to avoid remote control from a long distance, as this will increase battery consumption.

7

4

Share

What Causes the Chassis Noise in Classic Focus?

Here are the reasons for chassis noise in the Classic Focus: Disc Brake Noise: When the vehicle is driven at low speed on a flat road, an intermittent and irregular "creaking" sound is heard at the wheel axle. Cause: This is due to damage, deformation, or detachment of the brake shoe support plate, damping spring plate, or guide plate of the disc brake, which increases the gap between the brake shoe and the caliper support frame, causing them to collide and produce noise. Deformed parts can be repaired at a repair shop, and detached parts should be replaced. Front Suspension Ball Joint Noise Characteristics: When the vehicle is driven in low gear on uneven roads, a continuous "clicking" sound is heard from the front axle. The worse the road condition, the louder the noise, and it intensifies with increasing speed. Cause: The gap between the ball joint and its seat becomes larger, causing severe looseness. Since the ball joint seat is a sealed structure and cannot be disassembled, this situation requires replacement at a repair shop. Front Wheel Shock Absorber Noise Characteristics: On flat roads, a slight "gurgling" sound can be heard from the front of the vehicle, which intensifies during sharp turns. Cause: The vehicle is often driven on poor roads with improper maintenance, leading to oil leakage and damage in the shock absorber. Depending on the severity of the damage, it should be repaired or replaced.

7

1

Share

What are the reasons why an old Passat won't start?

Here are the reasons why an old Passat won't start: Spark plug performance: First, check the spark plugs. Since spark plugs are crucial to the car's ignition system, and the ignition system is key to the engine's operation, the performance of the spark plugs directly affects the vehicle's overall working performance and efficiency. Battery depletion: The characteristic symptom is that the starter begins to turn but lacks sufficient speed or power, and eventually, the starter only clicks without turning. Low temperatures in winter or leaving certain electrical devices on can prevent the vehicle from starting, especially after prolonged short-distance, low-speed use in winter, which can cause the battery voltage to drop below the rated value, making it impossible to start or run normally. If this occurs, call the service center for assistance, jump-start the car, or temporarily start it, but be sure to take the battery to the service center for a recharge afterward. Fuel flow obstruction: The characteristic symptom is no oil pressure in the engine's fuel supply line. This often happens on extremely cold mornings due to long-term dirt buildup in the fuel lines. At very low temperatures, water and debris can mix and block the fuel lines, preventing the car from starting. Emergency solutions: Move the car to a warmer environment, and it may start after a while; or thoroughly clean the fuel lines to resolve the issue.

20

2

Share

What does EPC on the dashboard mean?

How to reset the tire pressure light on the Jade?

At what speed should a manual transmission car shift gears?

Introduction to the Gears of Hongqi Automatic Transmission Vehicles

What's the matter with the classic Focus remote key not being able to lock the car?

What Causes the Chassis Noise in Classic Focus?

What are the reasons why an old Passat won't start?

What is the difference between Volkswagen ODIS and 5054?

What are the causes of high temperature in a car radiator?

What is the reason why the car air conditioner sometimes blows cold and sometimes not?

What engine does the Audi Q2L use?