What does engine oil SP/GF-6 mean?

How to Remove Adhesive from Car Windows?

Methods to remove adhesive from car windows include: 1. Apply vinegar to the adhesive with a cotton swab, wait for the vinegar to dissolve the adhesive, then wipe it off with a cloth; 2. Apply essential balm to the adhesive and scrape it off with a knife; 3. Evenly apply alcohol to the residual adhesive, let it soften, then wipe it clean; 4. Spray a specialized thermal insulation cleaner on the adhesive, which will melt it quickly, then wipe it off with a cloth. The functions of car windows are: 1. To shield from wind and rain, and reduce noise; 2. To lower wind resistance and improve airflow; 3. To protect the safety of passengers. Maintenance tips for car windows include: 1. Use specialized or suitable wiper blades and replace them timely; 2. Keep the windshield clean; 3. Use automotive-specific glass cleaner.

1

5

Share

How Long Does the Lifespan of Geely CVT Transmission Last?

The lifespan of Geely CVT transmission largely depends on the service life of the steel belt. The commonly used pressure steel belt is designed to last for 30 years or more. For a well-maintained CVT transmission, it can generally be used for 200,000 to 300,000 kilometers or about 15 to 20 years. Methods to extend the lifespan of the transmission are as follows: 1. Replace the transmission fluid according to the specified time or mileage. Although many manufacturers claim that the transmission requires no maintenance for life, the replacement cycle of transmission fluid is generally between 60,000 to 80,000 kilometers (varies by model). After the first maintenance, it is recommended to replace it every 40,000 to 60,000 kilometers to prevent the transmission fluid from deteriorating. 2. Do not keep the gear in D for a long time when not driving. Keeping the gear in D means the transmission is working, with internal parts rubbing against each other and stirring the fluid, which raises the temperature of the transmission. Over time, this can cause the transmission fluid to deteriorate prematurely, reducing its lubrication and cooling effects, thereby increasing wear on the transmission. 3. Pay attention to daily driving habits. The gear and speed should match; neither low gear at high speed nor high gear at low speed is advisable. Also, avoid coasting in neutral, as a vehicle without power not only interrupts the oil supply to the transmission but is also in a passive state, which is very dangerous. Do not shift into P gear before the car has completely stopped, as this can easily damage internal parts.

10

3

Share

How to Solve the Abnormal Noise in Classic Focus?

Common abnormal noises in Focus and their solutions are as follows: 1. Regarding the abnormal noise after cold start of Focus: After cold start, noise is generated in the engine area, the frequency of which is related to the engine speed. The noise basically disappears as the running time increases or the engine temperature rises. 2. Abnormal noise in the engine compartment after Focus starts: Most of the noise comes from the electronic power steering pump. Due to the design, the electronic power steering pump provides high oil pressure at low speeds and lower oil pressure above a certain speed. Therefore, the high-frequency noise of the steering pump is louder at idle, which is a normal phenomenon. 3. When the car is cold and idling, lifting the clutch pedal in neutral reveals noise, which disappears when the clutch is pressed. This may be caused by the gap between the spline sleeve on the clutch plate and the clutch plate's engagement position, or by the contact between the release bearing and the pressure plate. 4. Abnormal noise in Focus manual transmission cars when the clutch is half-engaged: After the friction surface of the clutch plate becomes smoother, the noise is caused by the vibration of the clutch plate during friction with the clutch pressure plate or flywheel.

3

5

Share

Can You Stop During Overtaking in Subject Three?

During the overtaking section of the Subject Three driving test, you are allowed to stop and wait in case of an emergency, but this depends on the situation. Not all circumstances permit stopping midway. For instance, during the straight-line driving segment, stopping midway is not allowed. If you stop during this part of the test, it will result in a failure. Below are some key considerations for overtaking in Subject Three: Observing Traffic Conditions: Before overtaking, you must use your peripheral vision to check the left and right side mirrors as well as the rearview mirror to assess the traffic around the test vehicle. Pay attention to the movement of the vehicle being overtaken and whether there are bicycles, electric scooters, or other obstacles on either side of your car. Choosing the Right Moment to Overtake: The basic principle is not to disrupt the normal flow of other vehicles. Select an appropriate time to overtake. Maintaining a Safe Distance: When overtaking, manage the lateral distance carefully, ensuring you account for both sides. Accurately estimate the distance, maintain control of the steering, and adjust your speed to minimize lateral sway, ensuring a safe overtaking maneuver.

15

5

Share

What to Learn on the First Day of Subject Three?

Subject Three initially involves practicing pre-driving preparations, light simulation, starting, straight-line driving, and gear shifting operations. Subsequently, you will learn about safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Below is an extended introduction to Subject Three: Subject Three Exam Content: Pre-driving preparations, light simulation test, starting, straight-line driving, gear shifting operations, changing lanes, pulling over, proceeding straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Driving Practice Notes: During practice, pay attention to traffic signals and avoid running red lights. When starting on a slope, ensure no rolling back occurs. Be familiar with gear positions and shift gears smoothly. When pulling over, first reduce speed and steer to the right, turn on the right turn signal, apply the brake to slow down, depress the clutch to stop the vehicle steadily. If there is a parking lane, you must park within it; otherwise, park within 30 centimeters of the roadside.

1

5

Share

What are the requirements for scheduling Subject 1 exam?

To schedule the Subject 1 exam, you must complete sufficient training hours. Otherwise, the system will display "Insufficient Training" when attempting online registration. However, training hour requirements vary by region - some areas mandate 12 hours for Subject 1, others require 16 hours, and certain locations stipulate up to 30 hours. Subject 1 has no limit on exam attempts. Each test provides two opportunities. If both attempts fail, you'll need to reschedule the examination. Subject 1 examination procedure: Follow staff instructions to collect your driver training file in sequence at the waiting area; Present your ID card for verification by the supervising officer; Mobile phones must be powered off before entering the examination area; No loud conversations permitted in the examination area; Regulation textbooks cannot be brought into the examination room (or must be stored in your bag); After the exam, securely store your ID card and submit the file to the "Document Submission Window" at the front of the examination room; Successful candidates must sign under staff guidance at the exit before leaving; Unsuccessful candidates may leave immediately and await notification from their driving school regarding retest arrangements.

18

3

Share

What does engine oil SP/GF-6 mean?

How to Remove Adhesive from Car Windows?

How Long Does the Lifespan of Geely CVT Transmission Last?

How to Solve the Abnormal Noise in Classic Focus?

Can You Stop During Overtaking in Subject Three?

What to Learn on the First Day of Subject Three?

What are the requirements for scheduling Subject 1 exam?

What is the method for starting an automatic transmission car?

What is the minimum ground clearance of the Audi A6?

Do You Need to Get a Score Report After Passing Subject One?

What does it mean when Subject 2 application status changes from 'Under Review' to 'Applying'?