What does emergency lane keeping activation mean?

1 Answers
LaJulia
07/29/25 10:59pm
Emergency lane keeping activation means that the emergency lane keeping system has been activated. The emergency lane keeping system can detect emergency situations and remind the driver to correct the driving route. The following are the methods to turn on or off the emergency lane keeping system, as well as an introduction to how the emergency lane keeping system works: Methods to turn on or off the emergency lane keeping system: In the car's central control screen, open the lane assist system and select emergency lane keeping to turn this function on or off. How the emergency lane keeping system works: It uses the onboard camera in conjunction with the processor to identify lane lines. Once the vehicle crosses the lane line without the turn signal activated, the system will determine that the vehicle is in an abnormal driving state. The system will then warn the driver by vibrating the steering wheel, reminding the driver to steer the vehicle back into the original lane.
Was this review help?
9
0
Share
More Forum Discussions

What Does Comprehensive Car Insurance Refer To?

Comprehensive car insurance refers to compulsory traffic insurance + vehicle damage insurance + third-party liability insurance + no-deductible coverage + passenger liability insurance. Under certain conditions, additional coverage such as theft insurance, glass insurance, body scratch insurance, and spontaneous combustion insurance can be added. The following are situations where claims are not covered: 1. Car theft in paid parking lots: Generally, if a vehicle is stolen from a paid parking lot or commercial repair shop, the insurance company will not be responsible for compensation. This is because the insurance company considers that the parking lot is responsible for the safekeeping of vehicles parked in paid parking areas, and the insurance company is not liable. 2. Intentional accidents by the driver: According to the insurance policy terms, intentional actions by the driver are excluded from coverage. Therefore, even in any emergency situation, if the accident is caused by the driver's deliberate actions, the insurance company will not be responsible for compensation.
6
5
Share

Is the oil leakage under the steering wheel caused by operation issues?

Oil leakage under the steering wheel is not caused by operation issues. Difficulty in steering wheel return: Vehicle steering wheels have an automatic return function. For cars equipped with hydraulic power steering, the automatic return function is somewhat weakened due to hydraulic damping. However, if the return speed is too slow, it indicates a malfunction in the return function. Steering wobble or deviation: When driving on one side of a curved road, the car naturally tends to deviate. When the curvature is significant, the deviation becomes more noticeable due to external factors. After ruling out tire pressure issues, it is likely caused by loosened or broken mechanical components in the steering gear. Uneven steering effort: If you feel that one side of the steering is lighter while the other side is heavier when turning the steering wheel, this symptom is generally caused by leakage in the sealing component responsible for sealing one side of the high-pressure chamber. Another possibility is improper adjustment of the directional limit valve.
13
4
Share

Can 5w40 engine oil be used in summer?

5w40 engine oil can be used in summer. In summer, you can use slightly thicker engine oil. Here are the methods for selecting engine oil: 1. Choose according to the oil grade: API standard classification starts with S, followed by letters E, F, G, H, G, L, M, N. The further back the letter, the higher the quality grade and the better the performance. 2. Choose according to the oil viscosity: Usually, subtract 35 from the number before W to get the minimum temperature at which the lubricating oil can be used. The low-temperature viscosity grades are 0W, 5W, 10W, 15W, 20W, 25W. The smaller the number, the better the low-temperature performance. The number "-30" indicates the viscosity at 100℃, usually divided into 20, 30, 40, 50, 60. The larger the number, the higher the viscosity.
7
5
Share

How soon can I retake the Subject 2 test?

Subject 2 retakes typically require a minimum waiting period of about 10 days. According to Article 44 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses': Each subject examination can be taken once, and if failed, one retake is allowed. Below are important considerations closely related to the Subject 2 test: Adjustments: Remember to first adjust your seat properly, then adjust the rearview mirrors to ensure accurate position judgment during the test. Crossing lines: When reversing into the garage, pay attention to the front hood crossing the lines. Many trainees fail this part because their car hood crosses the lines during the reversing process. Parking: During parallel parking, maintain good control of the clutch. Since considerable steering wheel movement is required during parking, special attention should be paid to clutch control.
5
2
Share

Which traffic light to observe when making a left turn at a T-junction?

Observe the traffic light on the opposite side of the road. You can only make a left turn when the green left-turn arrow light or the green circular light is on: According to the "Road Traffic Safety Law": For straight-going vehicles on the right side of a T-junction where there is no crossroad, they may proceed when encountering a red or yellow light, provided that they do not hinder the passage of released vehicles and pedestrians. When traffic lights are present: If there are traffic lights at the T-junction, you must follow the red light instructions. When the light is red, vehicles must wait behind the stop line. Pedestrian crossing lights: At a T-junction with pedestrian crossing lights, motor vehicles should follow the pedestrian crossing light instructions. When the light is red, passing through the T-junction is not allowed.
13
0
Share

What Causes a Manual Transmission to Fail to Engage Gear?

Introduction to reasons for manual transmission failing to engage gear: P-gear lock solenoid valve failure: For safety considerations, to prevent the vehicle from accidentally shifting into other gears during startup, the P-gear solenoid valve is installed. This solenoid valve requires a signal from the brake pedal to release. Therefore, these two components are interrelated. If any one of them fails, it will result in the gear lever being unable to shift out of P-gear into other gears. Gear lever assembly internal failure: Internal gear wear in the gear lever causes it to get stuck, making it difficult to push or pull, leading to the inability to shift gears or difficulty in shifting. Incomplete clutch disengagement: This may be caused by faults in the clutch disc and pressure plate. Generally, this requires replacing the clutch three-piece set (friction disc, pressure plate, and release bearing).
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.