What does Elysian ECON mean?

1 Answers
OLeila
07/29/25 10:38pm
Elysian ECON is the abbreviation for the low-carbon and eco-friendly driving mode. This button can turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode can be considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive than in Eco mode. Sport mode: Sport mode can be used during aggressive driving. After activating Sport mode, the throttle pedal response becomes very sensitive, and the transmission delays shifting. The transmission only upshifts when the engine speed reaches the redline. After switching to Sport mode, the engine speed is maintained at around 3,000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it achieves reduced fuel consumption and energy savings, but the car's power output weakens. ECON can be understood as the abbreviation for 'economy.' In most cases, it is recommended to keep ECON mode enabled. Only when high torque output is required (e.g., climbing a hill) or when driving at very high speeds should ECON mode be turned off. After pressing the ECON button, the car enters the low-carbon and eco-friendly driving mode. The ECU, engine, and transmission then intelligently execute the driver's intentions in the most fuel-efficient manner, achieving optimal fuel economy through quick upshifts and smooth acceleration. When the driver presses the throttle pedal deeply, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although ECON mode is simple and effective, it cannot operate under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the Eco mode automatically deactivates. This means that if the car exceeds the economical speed range (usually between 60–90 km/h), ECON mode will not save fuel. The key to ECON mode is the independent operation of the car's computer during driving to ensure effectiveness. Therefore, ECON does not function during idle parking or when in N, P, or manual mode. When overcoming significant resistance or requiring high torque output, such as when climbing a hill, the ECU prioritizes ensuring sufficient power to drive the car, and ECON mode will not work in such situations.
Was this review help?
9
4
Share
More Forum Discussions

Are Pickup Trucks Considered Cargo Vehicles?

Yes. The so-called "pickup truck" is a hybrid between a passenger car and a cargo vehicle, belonging to the category of dual-purpose vehicles. Pickup trucks feature a car-like front end and cabin, combined with an open cargo bed. They are characterized by the comfort of a passenger car, strong power, and even greater cargo capacity and off-road capability than regular cars. More details are as follows: 1. Common Types: The most common type of pickup truck is the double-cab model. 2. Uses: Pickup trucks can serve as specialized vehicles, multi-purpose vehicles, official cars, commercial vehicles, or family cars, used for cargo transport, tourism, rentals, and more.
4
3
Share

What is the function of the Nissan Sylphy's OFF button?

The function of the Nissan Sylphy's OFF button is to deactivate the auto start-stop feature. Below are detailed specifications of the Sylphy: 1. Vehicle Positioning: The Sylphy is a compact car under the Nissan brand, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. 2. Powertrain: The Sylphy is equipped with a 1.6L naturally aspirated engine across all variants. There are 4 models available, offering a choice between manual and continuously variable transmission (CVT). The engine delivers a maximum power of 93.0kW, maximum horsepower of 126PS, and maximum torque of 168.0N·m. 3. Suspension: The Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension.
12
2
Share

What Causes the Brake Light to Stay On After Locking the Car?

Reasons are as follows: 1. The brake pads need replacement; if you drive without releasing the handbrake, the light will also stay on. 2. Insufficient brake fluid, which plays a crucial role in the car's braking system. When the driver presses the brake pedal, the force applied is transmitted by the piston in the master cylinder through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle. 3. The tail light bulb is damaged. The brake fluid reservoir has upper and lower lines; if the fluid level is below the lower line, the sensor next to the reservoir will detect this and reflect it through the brake light on the dashboard. If the brake fluid level drops rapidly, it indicates a leak in the braking system.
10
1
Share

What does BMW PDC failure mean?

BMW PDC failure refers to the malfunction of the Parking Distance Control system. Below is a brief introduction about BMW: 1. Basic information: BMW (Bavarian Motor Works), fully known in Chinese as Bayerische Motoren Werke AG, is a German luxury automobile brand. BMW's vehicle series include the i, X, Z, and pure numeric models, as well as series such as 1, 2, 3, 4, 5, 6, 7, and 8, along with the M series (BMW's official high-performance modification division) which is based on improvements to the existing series. 2. Headquarters address: BMW was founded in 1916, with its headquarters located in Munich, Bavaria, Germany. The blue and white logo of BMW represents the colors of the Bavarian state flag, where the company's headquarters is located.
3
2
Share

What Causes Brake Failure When Reversing?

Reasons why brakes fail when reversing: Excessive brake pad wear: Brake pads have a service life. Once they are excessively worn, they should be replaced promptly. Otherwise, it can easily lead to brake failure and may also affect the brake disc. In severe cases, it can cause damage to the braking system. Deteriorated brake fluid: Brake fluid, commonly known as brake oil, absorbs moisture from the air during long-term use, which lowers its boiling point. When the boiling point drops significantly, it can affect the vehicle's braking performance, resulting in brake failure. Therefore, brake fluid needs to be replaced regularly. Newly installed brake pads: Newly installed brake pads have not yet been properly broken in with the vehicle. As a result, they may not provide optimal braking performance immediately after installation. New brake pads require a certain break-in period to maximize their effectiveness.
12
2
Share

What to Do If You Overfill the Engine Oil in a Motorcycle?

Overfilling the engine oil in a motorcycle can lead to engine overheating, incomplete clutch separation, and reduced power. Below are some precautions to take when adding oil to a motorcycle: 1. Choose the Right Oil: Strictly follow the manual's specifications for the brand and grade of lubricating oil, and try to purchase from reputable stores or direct manufacturers. Be cautious of counterfeit or substandard products when selecting a lubricant brand. 2. The Right Amount: Avoid adding too much or too little oil. The correct oil level should be between the upper and lower marks on the dipstick. 3. Do Not Mix Oils: Never mix different brands of oil or use new and old oil together. Oils from different brands or origins should not be mixed, as their chemical compositions and formulations vary. Mixing them can cause chemical reactions, leading to oxidation and deterioration, severely affecting lubrication performance. This can result in engine overheating, accelerated wear of components, and ultimately shorten the engine's lifespan.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.