What does 'efflclency' displayed on Audi mean?

2 Answers
JuliaDella
07/28/25 9:20pm
Audi displaying 'efflclency' means the vehicle's driving mode is set to Economy Mode. Economy Mode Instructions: When the Audi dashboard LCD screen shows an 'E' in the lower right corner, it indicates Economy Mode is active. The screen will display 'Economy Mode' in the center for 5 seconds before automatically returning to the previous interface. Press the switch again to exit the mode. Shifting to M gear temporarily exits Economy Mode. Economy Mode Features: Economy Mode helps drivers accelerate in an eco-friendly manner by moderating throttle response and controlling the air conditioning system (heating/cooling) to improve fuel efficiency.
Was this review help?
13
0
Share
LawsonRose
08/12/25 2:00am
My Audi has been running for several years, and the 'efficiency' display actually refers to the driving efficiency system. Every time I start the car, this prompt pops up on the dashboard, monitoring my driving habits, such as how hard I press the accelerator or how abruptly I brake. The system calculates a score or progress bar, lighting up green when it's high, reminding me to drive more smoothly. As an owner, I find this quite useful—it helps me save on fuel costs. If I drive carelessly with low efficiency, fuel burns faster and is wasted, so it's better to accelerate gently and brake less abruptly. The operation is straightforward; detailed reports can be accessed in the MMI settings, showing changes in average fuel consumption. This is especially noticeable on highways, where high efficiency can save 5%-10% on fuel, making long-term maintenance easier. I recommend new car owners pay more attention to this feature—developing good habits leads to comfort and safety.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Maxus G10?

The Maxus G10 has a fuel consumption of 10.5 liters per 100 kilometers. The actual comprehensive fuel consumption depends on multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on real driving conditions. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but higher fuel consumption does not necessarily mean larger displacement. Relatively speaking, the size of a car's engine displacement does not directly correlate with fuel consumption in a proportional manner. Besides engine displacement, factors such as the car's shape, weight, and engine technology are also significant factors affecting fuel consumption. Solutions for high fuel consumption: Correct bad driving habits, accelerate smoothly, avoid coasting in neutral, reduce the car's load, perform regular maintenance and checks, and address any issues immediately when discovered.
1
3
Share

How to Drive Across a Bridge Surface?

Methods for driving across bridge surfaces: 1. Narrow bridges: If oncoming vehicles are close to the bridgehead, actively pull over and yield, proceeding only after they've passed; 2. Arch bridges: Reduce speed, sound the horn, keep left, stay alert to oncoming traffic, and prepare for braking—never risk speeding uphill; 3. Suspension bridges, floating bridges, or temporary bridges: Avoid changing speed, braking, or stopping on the bridge to minimize swaying; 4. Unfamiliar bridges: Observe bridge conditions carefully and do not exceed 20 km/h. When crossing, try to avoid stopping to prevent traffic blockages. Approaching permanent bridges, pay special attention to nearby traffic signs and follow regulations. Maintain a safe distance from vehicles ahead and reduce speed when crossing.
2
4
Share

What does MAP mean on a car?

In automobiles, MAP stands for Manifold Absolute Pressure sensor, which measures changes in absolute pressure (vacuum) within the intake manifold and converts them into voltage signals. These signals are then transmitted to the Engine Control Unit (ECU). Based on this data, the ECU determines the engine load and, in combination with the engine speed signal, calculates the appropriate fuel injection quantity. Below is an introduction to the intake manifold: 1. Composition: The intake manifold absolute pressure sensing element consists of a silicon chip. A pressure diaphragm is etched onto the silicon chip, with a piezoresistive strain gauge forming a Wheatstone bridge. In addition to the pressure diaphragm, signal processing circuits are integrated onto the silicon chip. 2. Silicon Chip: The silicon chip is only a few micrometers thick, so changes in intake manifold pressure cause the silicon chip to deform. The piezoresistive strain gauge also deforms, altering its resistance. After processing by the signal processing circuits on the silicon chip, a voltage signal that is linearly related to the pressure is generated.
8
3
Share

Should the Transmission Fluid Be Changed During the First Maintenance?

The transmission fluid does not need to be changed during the first maintenance. Generally, it is recommended to replace the transmission fluid every 60,000 kilometers. Below is an introduction to transmission fluid: 1. Function: Transmission fluid has functions such as cleaning, lubrication, rust prevention, and heat dissipation. Regularly changing the transmission fluid can clean and lubricate the gear system, extend the lifespan of the transmission components, ensure the normal operation of the transmission, and make gear shifting smoother. 2. Consequences of Not Changing: Failure to change the automatic transmission fluid regularly can lead to the following issues: impurities forming due to chemical changes in the automatic transmission fluid, causing blockages in the oil passages and affecting gear shifting functionality. Prolonged high-temperature operation reduces the lubricating properties of the automatic transmission fluid, increasing the risk of clutch plate wear. Over time, the anti-oxidant performance of the automatic transmission fluid deteriorates, making components more susceptible to corrosion.
18
4
Share

Where is the transmission of Wuling Xingchen produced?

The transmission of Wuling Xingchen is produced by SAIC-GM-Wuling. Powertrain details: Both the engine and transmission of Wuling Xingchen are independently developed and manufactured by SAIC-GM. The LJ0-1.5T engine delivers a maximum power of 151 horsepower and a peak torque of 250 N·m, paired with either a 6MT or a simulated 8-speed CVT transmission. The simulated 8-speed transmission is a CVT jointly developed by SAIC-GM and Bosch, known for its good quality and smooth gear shifting. Introduction to SAIC-GM-Wuling: The engine plant features production lines for cylinder blocks, cylinder heads, crankshafts, and final assembly, primarily manufacturing engines for mini and small vehicles. Designed and constructed entirely according to General Motors' standards, the engine manufacturing technology has reached internationally advanced levels.
12
3
Share

Should the Sagitar 280TSI use 92 or 95 octane gasoline?

The Volkswagen Sagitar officially recommends using gasoline with an octane rating of 92 or higher, and 95 octane gasoline can also be used. 92 octane gasoline has a 92 octane rating and is suitable for mid-range vehicles. Octane Rating: Different fuel grades have different octane ratings, and the fuel grade is determined by the octane value. Higher-grade fuels have higher octane ratings, which provide better anti-knock performance, smoother engine operation, reduced vehicle wear, and better engine protection. Main Components of Gasoline: The main components of gasoline are hydrocarbons such as C5-C12 alkanes, cycloalkanes, olefins, and aromatic hydrocarbons. The differences between different gasoline grades lie in subtle variations in olefin and aromatic hydrocarbon content, as well as differences in the content of the gasoline additive MTBE. Higher-grade gasoline contains more olefins, aromatic hydrocarbons, and MTBE.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.