What does ECO mode mean?

1 Answers
Jill
07/25/25 3:03am
Vehicle ECO mode, also known as ECOPRO mode in some cars, is the energy-saving mode of the vehicle. Below is relevant information about vehicle ECO mode: 1. Origin: The name ECO is derived from the combination of Ecology, Conservation, and Optimization. From its inception, it has been designed with the fundamental concepts of technology, environmental protection, and economy, which have become the consistent qualities pursued by the ECO intelligent engine family series. 2. Function: ECO mode acts more like an intelligent fuel-saving companion, guiding and reminding the driver to adopt appropriate driving habits. When the optimal fuel supply is achieved, the dashboard will simultaneously display the green "ECO" indicator. However, if the accelerator pedal is pressed hard for acceleration or when encountering uphill sections, the "ECO" indicator will disappear.
Was this review help?
4
3
Share
More Forum Discussions

What is the main purpose of motor vehicles participating in safety technical inspections?

The main purpose of motor vehicles participating in safety technical inspections is to check various performance coefficients of the vehicle, promptly eliminate potential safety hazards, and reduce accidents. The following is a detailed introduction about automotive safety: 1. Overview: Automotive safety is mainly divided into active safety and passive safety. Active safety involves controlling the vehicle as smoothly as possible. Whether braking and accelerating in a straight line or steering left and right, the operation should be as stable as possible to avoid deviating from the intended path and not affecting the driver's vision and comfort. 2. Others: The scope of automotive safety technology is becoming broader and more detailed, developing towards integration, intelligence, systematization, and universalization. Strictly controlling speed during night driving is a fundamental measure to ensure safety.
8
1
Share

How to Deal with Frost on the Inside of Car Windows in Winter?

Methods to handle frost on the inside of car windows in winter include: 1. Turn on the car's heater; 2. Use a hard plastic scraper to remove it; 3. Apply a specialized de-icing agent; 4. After parking, open the car doors to ventilate. The reason for frost forming on the inside of car windows in winter is: residual heat inside the car after the driver leaves causes the temperature of the windows to be higher than the outside, leading to condensation that freezes when it gets cold. Preventive measures to avoid frost on the inside of car windows in winter include: 1. Park the vehicle in a garage; 2. Cover the car with a car cover or use a large cloth to cover the windshield; 3. Spray antifreeze on the windshield before parking.
12
5
Share

What are the reasons for a car not starting in the morning?

The reasons for a car not starting in the morning are: 1. Insufficient battery power; 2. Incorrect gear position; 3. Steering wheel lock; 4. Low engine temperature, high viscosity of lubricating oil, poor fuel volatility; 5. Dirty throttle body; 6. Faulty water temperature sensor; 7. Faulty spark plugs. The solutions for a car not starting in the morning are: 1. Turn the key to the ON position, press the clutch and shift into first gear, push the car until it reaches a certain speed, then release the clutch and press the accelerator; 2. Find another car, position the two cars facing each other, open the hood, connect the red end of the jumper cable to the positive terminal of the battery, and the other end to the other car.
1
2
Share

What is the difference between Golf 230 and 280?

The differences between Golf 230 and 280 are: 1. Different body lengths: The Golf 230 has a body length of 4259mm; the Golf 280 has a body length of 4262mm. 2. Different power outputs: The Golf 230 has a maximum power of 96 kW and a maximum torque of 225 Nm; the Golf 280 has a maximum power of 110 kW and a maximum torque of 250 Nm. 3. Different transmissions: The Golf 230 is equipped with a 7-speed dual-clutch transmission; the Golf 280 is equipped with a 5-speed manual transmission. 4. Different tire specifications: The Golf 230 has tire specifications of 205/55r16; the Golf 280 has tire specifications of 225/45r17.
11
3
Share

How to Add Car Coolant? Where to Add It?

Open the coolant filler cap and the drain valve to add antifreeze. The antifreeze reservoir usually has water level markings indicating the maximum and minimum levels. It is generally recommended to add about 4 liters, but this should be adjusted based on the actual condition of the car. Here is some relevant information: 1. Function of antifreeze: Antifreeze is not only used in winter. It has anti-freeze, cooling, anti-corrosion, and anti-scaling effects. The main functions are anti-freeze and cooling, ensuring the car can operate normally without freezing in cold climates and cooling the high-temperature engine during operation. 2. Hazards of insufficient antifreeze: Too little car antifreeze can cause the engine or radiator to freeze and crack, leading to engine failure.
18
1
Share

Where is the Cadillac Heater Switch Located?

Cadillac Heater Switch is located in the middle of the center console. Steps to operate the Cadillac heater: The Cadillac heater has a toggle switch located in the middle of the center console, displaying red and blue colors. The red side indicates the heater mode. Turn the switch to the red side, then activate the fan switch to turn on the heater. When using the heater, please ensure the A/C switch is turned off. Precautions for using the heater: Sometimes people leave the heater running for extended periods while parked, or even take naps in the warm cabin. This is highly dangerous as it may lead to carbon monoxide poisoning. If you must wait while parked, it's advisable to turn off the engine and heater. Alternatively, you can slightly open a window to allow for proper ventilation.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.