What does ECO mean in automatic transmission?

1 Answers
FinleyRose
07/30/25 3:10am
ECO in automatic transmission refers to the car's economical driving mode. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator on the dashboard lights up, it indicates that the vehicle's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator lights up, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active Eco mode does not have a dedicated button. When the Eco indicator on the dashboard lights up, it serves merely as a reminder function. The Eco mode automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator. Most cars use the active Eco driving mode, which means they have a dedicated switch button. During daily driving, we can activate the Eco mode. However, it is unnecessary to activate the Eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not reflect the fuel-saving characteristics of Eco mode and could instead affect the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 km per hour, the car prioritizes speed, and the Eco mode automatically deactivates. During idle parking or in N/P gear or manual mode, the Eco mode may also become ineffective. When a high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in this case.
Was this review help?
15
5
Share
More Forum Discussions

How Should Passengers Exit the Vehicle Safely?

It is necessary to observe the side and rear conditions first, then open the door slowly to ensure safety. Below is an introduction to road traffic signs: 1. White dashed and solid lines: Generally, road traffic markings are mostly white. Among them, white dashed lines separate lanes traveling in the same direction, allowing operations such as crossing the line to change lanes; while white solid lines prohibit crossing the line and often appear as extensions of white dashed lines before intersections or to separate roadside parking areas. 2. Yellow dashed lines: Yellow dashed lines are also used to distinguish lanes in different directions, usually set on relatively narrow roads. Whether it's a single yellow line or double yellow lines, as long as it's a dashed line, you can cross the line to overtake or make a U-turn, of course, only under safe conditions. 3. Deceleration warning lines: On roads near intersections or school entrances, there are often markings or signs reminding vehicles to slow down, with quite diverse styles and not singular.
13
5
Share

Does Installing a Front Splitter with Drilling Damage the Car?

Properly installing a front splitter does not damage the car. Types of front splitters: Currently, front splitters generally come in two installation methods. One is directly bonding to the lower part of the bumper using high-strength adhesive. The other involves drilling holes in the lower part of the bumper and securing it with screws and nuts. This method is more reliable but is considered a damaging installation. Detailed overview of front splitter installation: Currently, adding side skirts and front splitters is considered illegal modification. Therefore, even if you proactively report to the vehicle management office after modification, they will only require the owner to restore the original condition. Hence, it is not recommended to privately install front splitters and side skirts. Currently, legal modifications mainly include wheels of the same specifications as the original factory, roof racks under 300MM, interiors that do not alter the vehicle's original structure, body color, side steps, grilles, and braking systems.
10
4
Share

How to set up one-touch window control for Trumpchi GA6?

Trumpchi GA6 one-touch window control setup method is: 1. Briefly press the window button to automatically lower it completely; 2. Briefly pull the window button to automatically raise it completely; 3. Long-press the window button during descent and release to stop the window from lowering; 4. Long-pull the window button during ascent and release to stop the window from rising. The Trumpchi GA6 is a mid-size car under the Trumpchi brand, with body dimensions of 4891mm in length, 1850mm in width, and 1505mm in height, and a wheelbase of 2815mm. In terms of power, the Trumpchi GA6 is equipped with a 1.5-liter turbocharged four-cylinder engine, with a maximum power of 124 kilowatts and a maximum torque of 265 Newton-meters.
18
0
Share

How often should the spark plugs be replaced on the Baojun 560?

Baojun 560 spark plugs should be replaced every 20,000 kilometers. Methods to determine whether the spark plugs need replacement include: 1. The lifespan of a resistor spark plug is 20,000 kilometers, while an iridium spark plug should be replaced every 70,000 to 80,000 kilometers; 2. Conduct a short-circuit test on the spark plug with a screwdriver while the engine is idling; 3. Remove the spark plug and check for color changes. The Baojun 560 is the first SUV model officially launched by SAIC-GM-Wuling. Its body dimensions are 4620mm in length, 1820mm in width, and 1750mm in height. In terms of configuration, the Baojun 560 comes standard with ESC (Electronic Stability Control), VDC (Vehicle Dynamic Control), TCS (Traction Control System), HBA (Hydraulic Brake Assist), HHC (Hill Hold Control), front and rear parking sensors, and ISOFIX child seat anchors.
16
4
Share

Where is the air intake of the Accord located?

The air intake of the Accord is located in the engine compartment, specifically at the position of the air filter. Below are the functions of the Accord's air intake: Delivering air: It supplies clean, dry, sufficient, and stable air to the engine to meet its requirements, preventing impurities in the air and large particles of dust from entering the engine combustion chamber, which could cause abnormal wear. Reducing noise: Another important function of the intake system is to reduce noise and control the air intake volume. Noise not only affects the vehicle but also impacts the interior noise level, significantly influencing ride comfort. Enhancing performance: The design quality of the intake system directly affects the engine's power and noise characteristics, which are related to the overall ride comfort of the vehicle. Properly designed muffler components can reduce subsystem noise and improve the vehicle's NVH performance.
12
3
Share

What is the problem with low engine water temperature?

Reasons for low engine water temperature: 1. Louver failure; 2. Cooling fan failure; 3. Water temperature sensor failure; 4. Thermostat failure. Solutions: 1. Check if there is any foreign object blocking the louver; 2. Check if the fan blades are operating normally; 3. Check if the water temperature sensor and circuit are short-circuited or open-circuited; 4. Disassemble and inspect the thermostat, observe its opening in water at different temperatures. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. The engine can be used as a power generation device or refer to the entire machine including the power unit.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.