What does driver's license filing mean?

Will the steering gear make a clunking noise when driving on rough roads if it's broken?

Yes, in this situation, it is necessary to check whether the play in the outer tie rod ball joint of the steering gear is normal, and whether the play in the internal tie rod ball joint of the steering gear is normal. 1. Solution: If any abnormality is found, simply replace the tie rod ball joint; there is no need to replace the entire steering gear. However, if there is excessive play in the internal gear rack of the steering gear, and the issue persists after adjusting the play, then replacement is the only option. 2. Fault inspection: Generally, when there is abnormal noise from the chassis while driving on rough roads, first check the car's shock absorbers. Based on the location of the noise, determine the specific area. When the car is parked on flat ground, the distance between the car and the ground is too small, making it difficult to inspect for faults. It is best to take the vehicle to a repair facility, where it can be lifted with a hoist to check for gaps in the shock absorbers and whether there are any faults in the suspension.

6

1

Share

How much nitrogen should be added to a 68 breaker hammer?

68 breaker hammer typically requires a pressure value of around 1.4-1.6MPa. Power source: It is powered by the pressure oil provided by the pump station of an excavator or loader, which can more effectively remove floating stones and soil from rock crevices during building foundation excavation. The principle for selecting a hydraulic breaker is to choose the most suitable one based on the excavator model and the working environment. Hydraulic breaker: Hydraulic breakers have become an important working tool for hydraulic excavators. Some people also install hydraulic breakers on backhoe loaders (also known as two-way machines) or wheel loaders for breaking operations. Hydraulic breakers are also called hydraulic breakers or hydraulic crushers (hydraulic breaker).

6

4

Share

What is the meaning of traffic violation code 1301?

Violation code 1301 means: Motor vehicle driving against the traffic flow. According to the relevant regulations of the "Road Traffic Safety Law of the People's Republic of China", the penalty is: Demerit points: 3; Fine amount: 200 yuan; Other penalties: Warning. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The order from left to right is: the first digit is the behavior classification code, the second digit is the demerit points classification code, the third and fourth digits are the sequential code, and the fifth digit is the item number. First digit: Behavior classification code, indicating the category in the Road Traffic Law; Second digit: Demerit points classification code, indicating the category of demerit points for traffic violations; Third, fourth, and fifth digits: Sequential code, indicating the order of violations within the same behavior category. For example: 13035—"1" indicates motor vehicle behavior, the second digit "3" indicates 3 demerit points, and "035" indicates the fifth item of the third violation under the 3-point penalty category. Behavior classification code explanation: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003. Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002. Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030. Codes starting with 4 indicate highway traffic, e.g., 4002. Codes starting with 5 indicate other regulations, e.g., 5005. Codes starting with 7 indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008. Codes starting with 8 indicate local regulations of cities (prefectures, autonomous prefectures, or leagues), e.g., 8606. There are four common ways to check motor vehicle violations: Visit the office halls of traffic departments in various districts and counties to query via touch terminals; Log in to the public service website of the local Public Security Bureau's Traffic Management Bureau, find the vehicle violation query section, enter the license plate number and engine number, and click to query; Call (area code + 114) to inquire; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For motor vehicle driving against the traffic flow, you can handle the violation through this app. After logging in, enter the violation processing business process, complete the handling, and pay the fine.

16

1

Share

What is the suitable tire pressure for Changan CS75?

The recommended tire pressure range for Changan CS75 is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data complies with the international GBT2978-2008 standard. The Changan CS75 tire pressure monitoring system information is displayed on the dashboard LCD screen. When one or more tires are significantly underinflated, a warning light will illuminate. If the low tire pressure warning light comes on, you should stop and check the tires as soon as possible under safe conditions, and inflate them to the correct tire pressure. Generally speaking, a tire pressure exceeding 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern, shortening tire lifespan; increased vehicle vibration, indirectly affecting the lifespan of other components; excessive stretching of tire cords, reducing tire elasticity, and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, compromising driving safety; increased movement of tire parts, leading to abnormal heat due to excessive rolling; reduced functionality of cords and rubber, causing delamination or cord breakage, excessive friction with the rim, damaging the bead area, and abnormal wear; multiplied friction between the tire and the ground, sharply rising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, it will alert when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the previous data, and the tire pressure monitoring indicator light will remain on. At this time, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged due to impact while driving, the tire pressure fault light will also illuminate. For sensor damage issues, only replacement with a new part is possible.

6

1

Share

Can I Get My Vehicle Inspected During National Day Holiday?

Under normal circumstances, vehicle annual inspections cannot be conducted during the National Day holiday. General and Special Circumstances: Typically, vehicle annual inspections are unavailable during the National Day holiday as vehicle management offices are closed during this statutory holiday period. However, some regions may offer inspection services during the holiday to accommodate working professionals, though specific arrangements vary by local vehicle management offices. Inspection Arrangements: Vehicle inspections must be conducted at local vehicle management offices and inspection centers for online verification. Therefore, official services are unavailable during the Mid-Autumn Festival and National Day holidays.

16

1

Share

Where is the hood switch of the vv5?

vv5 hood switch is located at the pull handle under the dashboard on the driver's side. Engine: Engine generally refers to a machine that can convert other forms of energy into mechanical energy. It was first born in the UK and can be used as both a power generation device or the entire machine including the power device. Great Wall vv5: The manufacturer offers a total of 6 colors for consumers to choose from, which are Crystal Black, Mars Red, Swarovski Blue, Snow White, Siberian Silver, and Ayers Gray. The interior also has three combinations to choose from: black interior, black-brown interior, and black-red interior. It can be said that the highly futuristic and sci-fi exterior design of the Great Wall vv5, combined with various colors, gives it a youthful and vibrant atmosphere.

17

2

Share

What does driver's license filing mean?

Will the steering gear make a clunking noise when driving on rough roads if it's broken?

How much nitrogen should be added to a 68 breaker hammer?

What is the meaning of traffic violation code 1301?

What is the suitable tire pressure for Changan CS75?

Can I Get My Vehicle Inspected During National Day Holiday?

Where is the hood switch of the vv5?

Why Doesn't the Disc Brake Caliper Piston Retract?

What is an Engine?

How Many Days Does It Take to Check National Day Highway Violations?

Can I get my car inspected during the October holiday?