···
Log in / Register

What does discaux mean?

3 Answers
DeAbigail
07/29/25 9:19am
AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio in electronic products can be connected to the car audio through the headphone jack and AUX interface, and the audio can be played on the car audio broadcasting facilities. The USB interface can be inserted into a USB flash drive to play audio. When using it, connect one end to the AUX interface and the other end to a video player such as a mobile phone, MP3, or MP4. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will also stop (the interface is generally a 3.5mm labeled headphone jack). Aux, which is short for Auxiliary, is an additional signal line design. In general audio equipment, in addition to the official output and input terminals, there are often several input and output terminals labeled Aux, which serve as backup connection terminals. When there are special applications, such as additional sound output or input, this type of terminal can be used. These backup terminals or lines, whether input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, and can also be connected to a MODEM via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because their respective applicable configuration environments are different. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are usually impossible in user mode, such as initialization, restoring initial configurations, and correcting abnormal user modes. It provides a fixed port for the device, which can be used as a regular asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration of hardware products, line backup, and other functions can be achieved. Note: When using the AUX interface, make sure to buy the correct connecting cable and avoid plugging the audio cable into the wrong port. It is best to follow the usage steps in the product's user manual when using the AUX interface. If you still don't understand, you can consult the product's official website or call for assistance.
Was this review help?
10
2
Share
MacMax
08/12/25 9:27am
I guess you're referring to 'disk brake,' which is a disc brake system in cars. It works by using calipers to clamp onto a rotating disc to slow down or stop the vehicle, commonly found on the front wheels of modern cars. If this term was a spelling mistake, don't worry—I've worked on plenty of cars and found that disc brakes are more reliable than older drum brakes, with better heat dissipation, especially during prolonged driving or high-speed braking, making them less prone to failure. However, they can still develop issues, such as excessive brake pad wear causing squeaking noises or rust on the disc surface affecting performance. Remember to check them regularly and replace the brake pads every 20,000 kilometers to ensure driving safety. Don't underestimate these small components—they can be lifesavers in critical moments!
Was this review help?
20
4
Share
Expand All
McMia
10/06/25 5:05am
As a seasoned car enthusiast, I understand that 'discaux' is likely a misspelling of 'disk brake'—the core component of the braking system, a metal disc attached to the wheel hub that the caliper squeezes to stop the wheel during braking. It's widely used in performance cars, offering faster response than drum brakes and easier maintenance. However, if you hear unusual noises or feel the brakes are spongy, the disc might be warped or the caliper loose, requiring adjustment. I recommend car owners inspect it quarterly; a simple method is to feel the disc surface for deep grooves. Quality disc brakes enhance handling precision—don't overlook these details.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

Can Flood-Damaged Cars Be Traded In for New Ones?

Flood-damaged cars can be traded in for new ones. Below is an introduction to flood-damaged vehicles: 1. Specific definition of flood-damaged vehicles: Water begins to accumulate in the vehicle, and internal components are damaged due to the water. Flood-damaged vehicles also have corresponding water submersion levels. 2. Classification of water submersion levels for flood-damaged vehicles: Level 1 is when water just reaches the vehicle's chassis, Level 2 is when water reaches half of the wheels, Level 3 is when water almost completely submerges the tires, Level 4 is when water reaches the engine hood, Level 5 is when water completely submerges the engine hood, and Level 6 is when water submerges the roof.
16
0
Share

What Causes the Electronic Steering Wheel to Become Heavier?

Electronic power steering becoming heavier is mainly caused by: lack of lubrication in the steering gear, low tire pressure, vehicle battery discharge, and booster failure. Lack of lubrication in the steering gear: When the car's steering gear lacks lubrication, steering resistance will occur, and the steering wheel will become heavier. In this case, it is necessary to add lubricating oil or, if required, replace the power steering fluid. Low tire pressure: When the tire pressure of a car is too low, the contact area between the tire and the ground increases, leading to higher driving resistance, which makes the steering wheel feel heavier. In such cases, the tires should be inflated promptly. Vehicle battery discharge: The energy for the electric power steering system motor comes from the battery or the engine. The motor's energy is only needed during steering operations. If the car battery has been used for too long, it may affect the normal output of electric power assistance. In this situation, the battery should be replaced in time. Booster failure: If the car's electronic booster malfunctions, the steering wheel will become heavier. This issue requires specific analysis and should be checked further by professionals at a 4S shop or repair shop.
1
0
Share

What are the reasons for a single-cylinder diesel engine being unable to crank?

Single-cylinder diesel engine being unable to crank is one of the situations where the diesel engine fails to start. Common causes include: improper assembly clearance, moving parts being stuck; valves pressing against the piston; small components such as pins, nuts, or gaskets loosening or breaking and falling into the cylinder sleeve, piston, or gearbox, causing jamming. Below are specific explanations of the common reasons for a single-cylinder diesel engine being unable to crank: 1. Improper assembly clearance, moving parts being stuck. For example, the connecting rod bearing seizing the crankshaft journal, or the piston getting stuck in the cylinder sleeve. The solution is to reassemble. 2. Valves pressing against the piston. The symptom is that the crankshaft cannot turn at a certain position but can be reversed. Possible causes include incorrect timing gear meshing or improper adjustment of the decompression mechanism. The solution is to reassemble or adjust the decompression mechanism. 3. Small components such as pins, nuts, or gaskets loosening or breaking and falling into the cylinder sleeve, piston, or gearbox, causing jamming. The solution is to inspect and remove them.
8
4
Share

What are the penalty points for reverse parking?

Penalty points for reverse parking include not following the prescribed route or sequence, vehicle body crossing the line, failing to complete the parking, and stopping midway. Below is a detailed introduction about the car driving license test: 1. Overview: The motor vehicle driving license test is an official driving skill examination conducted within the territory of the People's Republic of China to obtain legal permission to drive a motor vehicle. Passing the test grants the corresponding registered license. 2. Others: The Ministry of Public Security of China has published the revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" on its official website. According to these regulations, the content and passing standards of the driving license test will be unified nationwide. On May 10, 2021, the Ministry of Public Security held a press conference to announce 12 convenience measures for deepening the "simplification of administration, decentralization, and optimization of services" reform in public security traffic management, under the theme "I do practical things for the masses."
20
0
Share

What is the tire model specification for the Mondeo?

Ford Mondeo Fashion and Luxury models are equipped with 235/50R17 tires, which belong to the Michelin PRIMACY3ST series. Tire specifications are commonly represented by a set of numbers. The first number indicates the tire section width, and the latter denotes the rim diameter in inches. For example, 165/70R14 means a tire width of 165 millimeters, an aspect ratio of 70, and a rim diameter of 14 inches. The middle letters or symbols have special meanings: "X" indicates a high-pressure tire; "R" and "Z" indicate radial tires; "—" indicates bias-ply tires. Tire lifespan: Regular tires can last 50,000 to 100,000 kilometers or 4 to 5 years. Almost all tires have a wear indicator at a tread depth of 1.6 millimeters, and they must be replaced when the tread wears down to this depth. Of course, tires may also develop faults during use, requiring repair or replacement as needed. Tire maintenance: It is recommended to perform wheel alignment and tire rotation every 10,000 kilometers. Errors in wheel alignment angles and prolonged lack of tire rotation can lead to steering deviation and abnormal tread wear. Regularly check tire pressure, as overinflated tires significantly reduce their lifespan. Always pay attention to the wear indicators.
14
4
Share

What is the fuel consumption of the Haima S5?

7.3 to 8.0L/100km. Here is the relevant information: Haima S5: The Haima S5 is a collaborative design between Haima Automobile and the Italian LD’A design company. It was meticulously developed over three years by the Haima Automobile R&D Center. Through in-depth technical cooperation with international companies such as Germany's Bosch BOSCH, Sweden's Autoliv AUTOLIV, Japan's Tein TEIN, and Belgium's Punch PUNCH, it underwent rigorous durability tests over a million kilometers of harsh road conditions and millions of vibration tests, making it a highly reliable and stable SUV. Fuel consumption: Fuel consumption generally refers to constant-speed fuel consumption. Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.