What does dexostm certification mean?

What is the fuel tank capacity of the 10th-generation Accord 260?

The fuel tank capacity of the 10th-generation Accord 260 is 56 liters, as officially announced. Owners of the 10th-generation Accord 260 can also check this information on the vehicle's configuration sheet. The 10th-generation Accord 260 uses 92-octane fuel, with a fuel consumption of 6L to 6.5L per 100 kilometers. A full tank of fuel can cover a distance of 861 to 933 kilometers. During daily driving, it is important to always monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is recommended to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

13

2

Share

What Should the Tire Pressure of a Sedan Be?

The normal tire pressure for small cars is generally around 2.3-2.5 bar. This is a recommended value. In actual use, the tire pressure should be determined based on the season and usage environment. Car owners can refer to the vehicle's user manual and the label next to the door, which will detail the manufacturer's recommended value. The tire pressure can be flexibly adjusted according to seasonal temperature changes. When driving in summer, the tire pressure can be appropriately reduced, while in winter, when temperatures are lower, it can be slightly increased. However, when adjusting the tire pressure, it is essential to keep it within the recommended range. According to the international GBT2978-2008 standard, the tire pressure for different types of tires is as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating that the tire pressure reset is complete.

5

0

Share

Does Starting at 3000 RPM Damage the Car?

Occasionally starting at 3000 RPM will not damage the car or affect its performance. However, frequently starting at 3000 RPM can impact the clutch, accelerating clutch wear; shorten the engine's service life; increase tire wear, reducing tire lifespan; and raise fuel consumption. Therefore, it is more appropriate to use 1st gear for starting acceleration, as it provides the highest torque. Accelerating clutch wear: Prolonged high-speed starts can cause severe wear on the clutch plates, leading to symptoms such as weak or slipping starts, slow uphill speed, difficulty accelerating, high fuel consumption, high engine RPM, and slow driving speed. Shortening engine service life: When the engine is cold, the internal fluids have not yet reached operating temperature, and lubrication is insufficient (due to gravity, most oil settles at the bottom). The lubricating oil film on component surfaces is unstable. Starting at high RPMs in this state can cause significant mechanical wear, reducing the engine's lifespan over time. Increased tire wear: Starting at 3000 RPM delivers high engine torque instantly through the transmission to the wheels. The wheels, unable to adapt quickly to the excessive driving force, experience intense friction with the ground, leading to accelerated tire wear. Increased fuel consumption: When starting at 3000 RPM, much of the fuel is wasted on engine idling rather than being converted into forward motion, resulting in higher fuel consumption over time.

15

5

Share

What does it mean when the FAW Audi app shows abnormal engine oil level?

It indicates an abnormality in the vehicle's engine oil. At this time, it is necessary to check whether the engine oil needs to be replaced due to expiration or if there is excessive engine oil pressure. Failure to inspect promptly may affect the vehicle's operation and compromise driving safety. Usage of the Audi mobile app: You can check the vehicle's related conditions through the mobile software; it allows viewing the remaining fuel level, the vehicle's fuel consumption per 100 kilometers, and the engine oil level display; it also shows the vehicle's maintenance schedule and more. For vehicles equipped with remote start, it also enables remote control of the vehicle.

18

5

Share

Where is the tire pressure monitoring set button on the 2019 Highlander?

The tire pressure monitoring set button on the 2019 Highlander is located on the center console. Below is relevant information about the tire pressure monitoring system: 1. Introduction: The tire pressure monitoring system is a simple device that utilizes the existing ABS sensing function to compare the rotation counts of tires. An underinflated tire has a shorter circumference, causing it to rotate differently from other tires when driving. 2. Function: Its primary role is to automatically monitor tire pressure in real-time while driving, alerting drivers to tire leaks or low pressure to ensure driving safety. It serves as an early warning system that safeguards the lives of both drivers and passengers.

13

1

Share

How to Fix a Small Dent on the Car Roof?

A small dent on the car roof can be repaired using metalworking and suction cups. Here are the specific methods for fixing small dents: 1. For relatively small dents: If the paint is not damaged, you can use a paintless dent repair method. Attach a suction cup to the dented area and use a pulling tool to apply even force to pull it out. Repeat this process several times until the dent is fully repaired. 2. For larger or sharper dents: If the paint is damaged, it's better to use the traditional metalworking repair method. This involves reshaping the deformed part of the car's metal shell and then applying specialized paint to restore the deformed metal surface to its original condition, matching the undamaged areas.

13

5

Share

What does dexostm certification mean?

What is the fuel tank capacity of the 10th-generation Accord 260?

What Should the Tire Pressure of a Sedan Be?

Does Starting at 3000 RPM Damage the Car?

What does it mean when the FAW Audi app shows abnormal engine oil level?

Where is the tire pressure monitoring set button on the 2019 Highlander?

How to Fix a Small Dent on the Car Roof?

What Causes Severe Heating of the Front Wheel Hub in a Car?

Will points be deducted if the ramp fixed-point parking is less than 30 centimeters?

How Long Can a Vehicle Run Without Enough Engine Oil?

What does the car symbol with an 'a' in a circle mean?