What does cruise mean when displayed on the car?

What does motorcycle gear slipping mean?

The so-called gear slipping refers to being in a high gear but unable to increase the speed. For example, when going uphill or carrying a heavy load, a large amount of torque is required to drive the motorcycle. If the gear is set too high at this time, although the power increases, the torque is insufficient, leading to gear slipping. Below are specific details: 1. Symptoms of gear slipping: The specific symptoms include the engine sound becoming muffled, the speed not increasing but instead decreasing when accelerating, and unstable engine RPM. Gear slipping is not a good driving habit as it can cause unstable engine RPM, severe detonation, reduced power, and increased fuel consumption. 2. Hazards of gear slipping: The hazards of gear slipping include higher fuel consumption, difficulty in increasing speed quickly, increased risk of engine detonation, and accelerated wear and tear on the crankshaft, connecting rod, and bearings.

3

4

Share

Does Remote Start with Air Conditioning Damage the Car?

Remote start with air conditioning damages the car. 1. Reasons: Turning off the engine before turning off the air conditioning is harmful to the engine. This is because when the vehicle is started again, the engine will start with the load of the air conditioning, and such a high load can damage the engine. 2. Best Practices: Turn off the air conditioning a few minutes before reaching the destination. This allows the natural air to circulate, helping the temperature inside the air conditioning ducts to rise and eliminate the temperature difference with the outside, thereby maintaining relative dryness in the air conditioning system and preventing mold growth. Additionally, it is advisable to wait two to three minutes after starting the vehicle, allowing the engine to be properly lubricated, before turning on the air conditioning.

9

5

Share

How to determine 30 centimeters for the right reverse parking in Subject 2?

To judge the 30-centimeter distance for the right reverse parking in Subject 2, you need to learn to observe the distance between the tire and the corner of the parking space in the rearview mirror, with a two-finger width being the accurate distance. Below are the related instructions for the right reverse parking: 1. Solution for steering too early: The car is too close to the upper right corner of the parking space, less than 30 centimeters or unable to enter the space at all; Solution: Turn the steering wheel back half a turn or a full turn (the exact amount depends on the situation, possibly 3/4 of a turn), wait until the right rear wheel enters the space beyond the upper right corner (do not turn the wheel back immediately when the right rear wheel just enters), then continue to turn the steering wheel fully to the right. When the car body is almost but not completely straight, straighten the steering wheel. 2. Solution for steering too late: The car is too far from the upper right corner of the parking space, more than 30 centimeters, and the left rear wheel is prone to pressing the left line; Solution: Upon noticing in the rearview mirror that the tire is too far from the upper right corner of the parking space, immediately check the left rearview mirror. Do not turn the steering wheel back at this time; let the car tilt until the left rear wheel enters the space beyond the upper left corner, then straighten the steering wheel and continue to turn the steering wheel to the left. When you see in the rearview mirror that the right side is safely inside, immediately check the left rearview mirror. When the car body is almost but not completely straight, straighten the steering wheel and park the car.

16

3

Share

What's the Difference Between 24-Tooth and 72-Tooth Ratchet Wrenches?

24-tooth and 72-tooth ratchet wrenches have the following differences: 1. Torque: The 24-tooth wrench provides greater torque and is more durable, while the 72-tooth wrench is slightly inferior in this aspect. 2. Flexibility: The 72-tooth wrench offers more flexible turning angles. Below is an introduction to ratchet wrenches: 1. Concept: A ratchet wrench consists of multiple sockets with hexagonal or dodecagonal holes, along with handles, extension rods, and other attachments. It is particularly suitable for tightening bolts or nuts in very tight or deeply recessed spaces. 2. Main applications: Ratchet wrenches are used when the nut or bolt end is completely below the connected surface and the diameter of the recessed hole does not allow the use of open-end wrenches, adjustable wrenches, or box-end wrenches. Additionally, when there are spatial constraints around the bolt, only a ratchet wrench can be used.

15

5

Share

What exactly should you look at in the distance during Subject 3?

Looking into the distance during Subject 3 mainly refers to observing the lane lines on both sides. Extending your gaze further helps maintain straight-line driving and allows for timely directional adjustments. Below are relevant details about Subject 3: 1. Passing Criteria: The full score for both the road driving skills and safe civilized driving knowledge tests in Subject 3 is 100 points, with a passing score of 90 points each. 2. Exam Challenges: (1) Speed and gear mismatch: Be cautious about the mistakes of high gear at low speed or low gear at high speed during the test. Before shifting gears, ensure the speed is adjusted to match the intended gear, then proceed with the shift. During driving, glance at the speedometer every eight seconds to prevent such errors. (2) Deviation in straight-line driving: Many learners intentionally slow down due to concerns about not driving in a straight line, which is not advisable. This can actually increase the likelihood of the vehicle's trajectory deviating, so maintaining a reasonable and steady speed is recommended.

2

3

Share

How to Use the Priority Booking for Driving Tests?

Driver's test priority booking service is only available for applicants whose learning driving permit has less than 6 months of validity. Each subject can be prioritized for one online test booking. Notes for booking driving tests: 1. After successful booking: Applicants cannot cancel the booking online once it is successful. If unable to attend the test at the scheduled time, they must apply for cancellation at the vehicle management office one day in advance. 2. Attend the test on time: Applicants need to bring their identity documents to the scheduled test center at the appointed time. Those who fail to attend the test on time will be judged as failing the test.

3

4

Share

What does cruise mean when displayed on the car?

What does motorcycle gear slipping mean?

Does Remote Start with Air Conditioning Damage the Car?

How to determine 30 centimeters for the right reverse parking in Subject 2?

What's the Difference Between 24-Tooth and 72-Tooth Ratchet Wrenches?

What exactly should you look at in the distance during Subject 3?

How to Use the Priority Booking for Driving Tests?

What is the reason for the jerking sensation when shifting from third gear to second gear?

How to Deal with Limewater Solidified on the Car?

What are the symptoms of a fuel pump pressure relief?

Will parking at an angle by the curb result in failure?