What does coolant mean in Hyundai vehicles?

1 Answers
Grant
07/28/25 3:12pm
In Hyundai vehicles, coolant refers to antifreeze (coolant). This label can be found on the antifreeze reservoir, and the indicator light on the dashboard may also display it. The functions of antifreeze are as follows: 1. Protect the engine: (1) In winter, prevent the coolant from freezing and damaging the engine: When parking in cold winter, it prevents the coolant from freezing, which could otherwise expand and crack the radiator or freeze and damage the engine cylinder block or head. (2) In summer, avoid overheating: During high summer temperatures, it effectively raises the boiling point to prevent overheating. Automotive antifreeze plays a significant role, directly affecting the vehicle's performance and lifespan. 2. It has anti-corrosion properties, protecting all these metals: Since the engine cooling system includes metals such as steel, aluminum alloy, cast iron, and copper, the cylinder block and head are generally made of cast aluminum or cast iron, and the radiator is mainly made of red copper and brass. Antifreeze is in long-term contact with these metals and must protect all of them. Using deionized water and appropriate additives can prevent various types of corrosion.
Was this review help?
4
1
Share
More Forum Discussions

What is the Difference Between 5W30 and 10W30 Motor Oil?

The differences between 5W-30 and 10W-30 motor oils are: different low-temperature fluidity, different lubrication effects, and different temperature ranges. Below are the detailed explanations: 1. Different Low-Temperature Fluidity: 5W-30 motor oil: 5W-30 oil has better low-temperature fluidity than 10W-30 oil, providing superior engine protection during cold starts. 10W-30 motor oil: 10W-30 oil has poorer low-temperature fluidity than 5W-30 oil, offering weaker engine protection during cold starts. 2. Different Lubrication Effects: 5W-30 motor oil: 5W-30 oil has a higher kinematic viscosity than 10W-30 oil, resulting in better lubrication performance. 10W-30 motor oil: 10W-30 oil has a lower kinematic viscosity than 5W-30 oil, leading to inferior lubrication performance. 3. Different Temperature Ranges: 5W-30 motor oil: 5W-30 oil can be used in lower environmental temperatures than 10W-30 oil, making it suitable for a wider range of temperatures. 10W-30 motor oil: 10W-30 oil requires higher environmental temperatures than 5W-30 oil, limiting its suitable temperature range.
6
3
Share

What is the content of the Shanghai Subject 3 driving test?

Subject 3 consists of a total of 16 items, including: vehicle preparation, starting, driving in a straight line, shifting gears, changing lanes, going straight through intersections, passing pedestrian crossings, passing bus stops, passing school zones, turning left at intersections, turning right at intersections, meeting oncoming vehicles, overtaking, making U-turns, pulling over, and night driving. Relevant information about the driver's license test is as follows: Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can one obtain a driver's license and legally operate a motor vehicle. Content: The motor vehicle driver's test is divided into the road traffic safety laws, regulations, and related knowledge test (also known as the "theoretical test", referred to as "Subject 1"), the field driving skills test (commonly known as the "pole test", referred to as "Subject 2"), and the road driving skills and safe and civilized driving knowledge test (commonly known as the "road test", referred to as "Subject 3"). The test content and passing standards are uniform nationwide, with corresponding test items specified according to different types of vehicles eligible for driving.
15
2
Share

What to Do When Your Car Gets Dented?

If your car gets dented, you can pour hot water over the dented area using a ladle to heat the car's exterior. Here is more relevant information: 1. Principle: The car's exterior is made of a combination of sheet metal and plastic. The front and rear bumpers are usually plastic. Plastic softens when heated, so based on this principle, the dented area can be heated and pushed back out. 2. Steps: (1) First, boil a large bucket of hot water, then use a ladle to pour the hot water over the dented area to heat it. (2) The process of heating with hot water is relatively slow. This is because the dented plastic needs to be heated to a certain degree before it softens enough to achieve the desired effect. (3) Once the plastic has been heated sufficiently, push it outward from the engine hood with your hand until the dented area pops back into place. (4) If it still feels too hard to push out, it means the heating process is not yet complete. More hot water is needed to continue heating the area.
15
0
Share

What is the penalty for having 6 people in a 5-seater car under the new traffic regulations?

Traffic laws stipulate that having six people in a five-seater car will result in a 3-point deduction and a fine of 100 yuan. For non-commercial vehicles, exceeding the approved number of passengers by less than 20% results in a 3-point deduction and a fine of 100 yuan; exceeding by 20% or more results in a 6-point deduction and a fine of 200 yuan. The hazards of vehicle overloading are as follows: 1. Vehicle overloading severely damages road infrastructure: Overloaded vehicles exert loads far exceeding the design capacity of roads and bridges, leading to pavement damage, bridge fractures, and significantly shortened service life. 2. Vehicle overloading increases the vehicle's mass and inertia, lengthening braking distance and increasing danger: Severe overloading can cause tire blowouts, sudden swerving, brake failure, rollovers, and other accidents due to excessive tire load and deformation. Additionally, overloading affects the vehicle's steering performance, increasing the risk of accidents due to loss of control. 3. Accidents: Drivers of overloaded vehicles often experience increased psychological stress and mental pressure, leading to operational errors and compromising driving safety, resulting in traffic accidents. 4. Traffic flow: Overloaded vehicles cannot maintain normal speeds, occupying lanes for extended periods, directly affecting road traffic flow.
1
1
Share

Are Vehicle Registration and License Plate Application Handled Together?

Vehicle registration and license plate application are not handled together, as they are two distinct processes. Below are the relevant details: Differences between vehicle registration and license plate application: Vehicle registration is akin to household registration, signifying that the ownership of the vehicle belongs to an individual. License plate application, on the other hand, is like giving the vehicle a name. The license plate number is assigned based on the provincial jurisdiction code, facilitating management. License plate application process: Before applying for a license plate, you need to prepare the relevant vehicle documents, obtain the registration application form and external inspection form, take photos, and print the motor vehicle parameter table. After that, the vehicle must undergo an inspection, followed by the license plate application process, where you affix the environmental card and receive the vehicle license and registration certificate. There are two methods for selecting a license plate number: self-selection or random selection. After the vehicle inspection, you can proceed to the local vehicle management office to choose a number. Once the license plate number is selected, you need to pay the corresponding fees and wait to receive the plate.
8
0
Share

What are the reasons for the engine fault light being on and severe body shaking?

There are several reasons for the engine fault light being on and severe body shaking: 1. Cold start: Incomplete fuel combustion leads to insufficient power, causing body shaking during cold starts. Low ignition energy requires more throttle input to meet power demands, especially when fuel and lubricant temperatures are low. 2. Suspension system: Body shaking may be related to aging suspension components. The suspension system primarily filters engine vibrations during operation; if it malfunctions, these vibrations directly transmit to the steering wheel and cabin, affecting driving. 3. Tires: When replacing tires or rims, wheel balancing is necessary. Uneven weight distribution can cause steering wheel vibration. Adding lead weights inside the rim can balance tire weight distribution if unevenness is detected. 4. Throttle body: The most common causes of car shaking are dirty throttle bodies and excessive carbon buildup in fuel injectors. After certain mileage, excessive dirt can prevent proper throttle closure or cause motor jamming, resulting in high idle speed. 5. Unstable oil pressure: Abnormal fuel pump pressure, incorrect intake pressure sensor readings, or improper operation can all lead to body shaking.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.