What does 'contl' mean in a car?

How to reset the tire pressure on a 2020 Odyssey?

2020 Odyssey tire pressure reset method: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "beep," then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. Precautions for inflating tires: Always use a pressure gauge to check the pressure to avoid overinflation, which can cause the tire to burst. After stopping, wait for the tires to cool down before inflating, as driving increases tire temperature, affecting pressure. Check the valve stem. If the valve stem and core are not properly aligned, have protrusions, depressions, or other defects, it will be difficult to inflate and measure pressure. Pay attention to cleanliness when inflating. The air pumped in should not contain moisture or oil to prevent damage to the inner tube rubber. Do not exceed the standard pressure too much and then deflate, nor overinflate due to prolonged inability to inflate while traveling. Exceeding the standard pressure excessively can overstretch the cords, reducing their strength and affecting the tire's lifespan.

18

2

Share

What is the reason for the failure of auto start-stop after replacing the battery?

The reason for the failure of auto start-stop after replacing the battery is: The battery replaced is not a dedicated start-stop battery. Starting the engine (start-stop function) requires a large current, and ordinary car batteries do not have good cyclic charging capability. Installing a regular battery will definitely prevent the start-stop function from working. Steps to replace the start-stop battery: 1. Open the two fastening buttons of the heat insulation cotton, lift the red and black insulating covers above the positive and negative terminals, and then locate the tightening nut of the battery negative terminal; 2. Use a wrench to loosen the tightening nut of the negative terminal, then use a flat-head screwdriver to slowly pry open the fastening block, and directly pull out the negative terminal; 3. Remove the positive terminal; 4. Unscrew the nut used to fix the battery locking strap and loosen the locking strap, then you can directly take out the car battery.

20

1

Share

How to Install License Plate Screws for a Car?

Method for installing license plate screws: 1. Prepare the license plate, a flat-head screwdriver, and a set of license plate screw components; 2. Locate the fixed points for the license plate on the front and rear of the car, especially identifying the four fixing points for the license plate; 3. Align the license plate with the fixing points on the car, ensuring it is straight and properly positioned. Hold it in place to prevent misalignment; 4. Insert the screw rod into the holes of the car's fixing points and secure the screws with the flat-head screwdriver. Repeat the same method for the other three fixing points, being careful not to overtighten; 5. Check if the plate is straight, make slight adjustments if necessary, and then snap on the four screw caps in order.

20

2

Share

Why Should Transmission Fluid Be Replaced?

Transmission fluid needs to be replaced for the following reasons: 1. The transmission requires gear oil for lubrication, cooling, cleaning, and corrosion prevention; 2. To reduce gear wear; 3. To keep the shifting system clean; 4. To extend the lifespan of the transmission components; 5. To prevent the transmission fluid from thinning and losing its lubricating properties. The steps for replacing transmission fluid are: 1. Remove the drain plug at the bottom of the transmission to drain the old fluid; 2. Remove the inner and outer transmission housing; 3. Remove the transmission fluid filter; 4. Take off the oil pan gasket and clean surrounding stains; 5. Wipe the cleaned transmission fluid filter with cotton cloth; 6. Add new fluid and complete the installation.

19

4

Share

What kind of engine oil should the Vezel use?

The naturally aspirated engine models of the Vezel can use full synthetic oil with a viscosity of 20, while the turbocharged engine models should use full synthetic oil with a viscosity of 30. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent external pollutants; 3. To prevent contact between water, air, harmful acidic gases, and engine components; 4. To buffer the pressure rise in the engine cylinder ports; 5. To clean dirt generated on the working surfaces of components. The Vezel is a compact SUV with dimensions of 4328mm in length, 1772mm in width, and 1605mm in height, a wheelbase of 2610mm, a fuel tank capacity of 50 liters, and a curb weight of 1227kg.

18

2

Share

Does the Audi A3 have ISOFIX interfaces?

Domestically produced Audi A3 models are equipped with ISOFIX interfaces. ISOFIX interfaces: The main advantage of ISOFIX is that the ISOFIX device can securely connect child car seats to the vehicle. It provides a simpler and safer way to install car seats. Installing a seat using ISOFIX is easier than using a seatbelt. The ISOFIX device effectively reduces the risk of incorrect installation, significantly lowering the chances of improper installation. Introduction to the Audi A3: The Audi A3 features a MacPherson strut front suspension and a rear axle with a torsion and crank-type structure, separately arranged springs and shock absorbers. In addition to excellent handling, the rear suspension layout also offers high space utilization, making the cargo area outstanding among vehicles in its class. All A3 series models come with disc brakes on both front and rear, with front brakes featuring ventilation slots.

16

3

Share

What does 'contl' mean in a car?

How to reset the tire pressure on a 2020 Odyssey?

What is the reason for the failure of auto start-stop after replacing the battery?

How to Install License Plate Screws for a Car?

Why Should Transmission Fluid Be Replaced?

What kind of engine oil should the Vezel use?

Does the Audi A3 have ISOFIX interfaces?

Can Different Engine Oils Be Mixed?

How many kilometers can the Roewe ei6 run on a full tank of fuel?

What are the differences between the Corolla and the Camry?

What is the difference between applying for a manual transmission and an automatic transmission driver's license?