What Does Collision Mitigation Braking System Mean?

2 Answers
PaisleyMarie
07/24/25 5:24am
Collision Mitigation Braking System (CMBS), the full English name is Collision-Mitigation-Brake-System, is a predictive collision and active prevention safety technology system. The following is a detailed introduction: 1. The function of CMBS: It uses microwave radar and a monocular camera to automatically monitor the front and automatically brake to prevent or mitigate collisions. CMBS can reduce the likelihood of collision accidents caused by driver inattention and reduce collision damage. 2. Principle: Through microwave radar and a monocular camera, it senses and identifies vehicles ahead, oncoming vehicles, and pedestrians. When there is a potential collision risk with a vehicle or pedestrian, the system alerts the driver with a warning sound and dashboard display to take evasive action. When approaching the vehicle or pedestrian ahead more closely, the system applies mild braking to remind the driver again through physical sensation to operate the vehicle. When the vehicle gets even closer, the system will apply strong braking to assist the driver in avoiding the collision and reducing damage.
Was this review help?
1
5
Share
BrodyLynn
08/11/25 1:06am
The Collision Mitigation Braking System is essentially a smart feature in your car that helps prevent collisions while driving. I've experienced it myself on the highway—it uses cameras or radar to detect if a vehicle ahead is getting too close. If the system determines a potential collision, it first sounds an alarm to prompt you to slow down. In case you don't react in time or get distracted, it automatically applies the brakes to reduce impact severity or even avoid an accident altogether. This feature is particularly useful in rainy, foggy, or nighttime conditions, significantly lowering the risk of rear-end collisions. As an experienced driver, I find this system reassuring for long-distance trips, especially when paired with Lane Keeping Assist. The combined effect noticeably enhances overall safety, making it much less likely to cause harm to yourself or others while driving.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What is the reason for the alarm continuously sounding?

Alarm continuously sounding may be due to a fault in the main control door ground wire, commonly known as a door switch fault. Below is relevant information about car alarms: Introduction: The car anti-theft alarm is a multifunctional product that not only serves an anti-theft alarm function but also can remotely open the trunk, remotely open/close car doors, remotely open/close windows, remotely start the engine, and remotely lock the engine. Ground Wire: Modern cars use the battery connected to the metal part of the car body, so the negative wire in a car is usually called the ground wire. The ground wire plays an important role in the car's electrical circuit, so the condition of the ground wire is key to the proper functioning of the car's electrical components.
16
2
Share

Is a Car Older Than Three Months Considered a Stock Car?

Is a Car Older Than Three Months Considered a Stock Car? A car older than three months is considered a stock car. Here are some considerations when choosing a stock car: Replace all vehicle fluids: Fluids like engine oil must be replaced, and others such as coolant and lubricants should be checked or replaced as well. Inspect tires and all rubber components: Rubber parts are most prone to aging and deformation. For example, car tires, which bear the weight at the bottom, can deform easily. Short-term parking is not an issue, but for stock cars parked for extended periods, as the rubber ages, the tires may not return to their original shape. Therefore, such tires need to be replaced promptly to ensure driving safety.
9
1
Share

Are All Off-Road Vehicles Manual Transmission?

Most off-road vehicles are manual transmission. Here is extended information about off-road vehicles: Introduction: Off-road vehicles ORV (Off-Road Vehicle) are specially designed automobiles for off-road use, mainly referring to vehicles that can operate on rough terrain. Their main characteristics include body-on-frame construction, four-wheel drive, higher ground clearance, tires with better traction, elevated exhaust pipes, greater horsepower, and sturdy bumpers. Function of Manual Transmission: The function of manual transmission is to change the gear ratio, also known as the gear ratio. Based on the principle of torque in lever mechanics, it uses the largest diameter low-speed gear with the longest radius to amplify the engine torque, assisting the vehicle in starting forward movement.
9
0
Share

How long is the Volkswagen Beetle?

Volkswagen Beetle body dimensions length/width/height (mm): 4129/1721/1498. Introduction to the Volkswagen Beetle: The Volkswagen Beetle, officially named the Volkswagen Type 1, is a compact car produced by Volkswagen (translated as Fuk's Motor Factory in Hong Kong) from 1938 to 2003. Volkswagen Beetle interior features: Speaker rings with LED light strips, showcasing the authentic Beetle style inside, fabric floor mats with the Beetle logo, welcome sill trim with the Beetle logo, and Vienna-perfected genuine leather sport seats.
7
5
Share

How many liters of transmission oil does the X-Trail need for a change?

It is recommended to replace the transmission oil around 4 years or 70,000 kilometers, typically requiring about 5 liters of oil. You can also replace the filter and use a circulating machine for oil change. Transmission oil change interval calculation: The replacement cycle for transmission oil is calculated similarly to the vehicle's maintenance cycle, based on either mileage or usage time. If the vehicle manual specifies both indicators, follow whichever comes first. If the manual does not provide such indicators or does not clearly state the oil change interval, replace the oil every 50,000 to 80,000 kilometers. Transmission oil change methods: Circulating machine oil change method: This method can thoroughly clean out the old transmission oil. However, it is more expensive and suitable for vehicles within 5 years of use.
20
5
Share

What is the principle of the lane change assist system?

The principle of the lane change assist system: It uses radar sensors to monitor the area behind and to the side of the vehicle, detecting the current position, speed, and direction of other vehicles on adjacent lanes within a certain range. The lane change assist system, or LCA, is designed to address the blind spot in the C-pillar of a car, which can pose a danger during lane changes. LCA employs 24GHz radar sensors to detect vehicles approaching from the blind spot behind and alerts the driver through indicator lights near the side mirrors. The blind spot monitoring system uses radar, cameras, and other devices to detect vehicles in the blind spots on both sides while driving. If another vehicle enters the blind spot, it alerts the driver through the side mirrors or other designated indicators.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.