What does CNG mean on a car?

1 Answers
LeonardoRose
07/29/25 8:03pm
Cars marked with CNG indicate that the vehicle uses compressed natural gas as automotive fuel. Here are the relevant details: Introduction: CNG, or Compressed Natural Gas, is natural gas that has been pressurized and stored in containers in a gaseous state. The composition of CNG is the same as pipeline natural gas, with methane being the primary component. Features: CNG is an ideal alternative energy source for vehicles, and its application technology has become increasingly mature after decades of development. It offers advantages such as low cost, high efficiency, no pollution, and safe and convenient usage.
Was this review help?
14
1
Share
More Forum Discussions

What Octane Gasoline Should a Haval H6 Use?

The Haval H6 officially recommends using gasoline with an octane rating of 92 or higher. Here are some relevant details about gasoline: 1. 92-octane gasoline has a octane rating of 92 and is suitable for mid-range vehicles (those with lower compression ratios). The gasoline octane rating represents its anti-knock properties; a higher number indicates better anti-knock performance, but it does not relate to the quality of the gasoline itself. It does not mean that higher-octane gasoline contains fewer impurities. 2. Switching from a lower to a higher octane fuel does not significantly improve vehicle power, but it will noticeably increase fuel costs. Conversely, switching from a higher to a lower octane fuel can cause engine knocking, increase carbon deposits, and potentially shorten the engine's lifespan.
15
3
Share

What brand is the Dio motorcycle?

Honda's highly sporty small scooter. Below is the relevant introduction about scooters: 1. Overview: Scooters are basically equipped with continuously variable transmission and automatic clutch, similar to Mullan-style electric vehicles, without gear design. After starting, you only need to twist the throttle to go, and releasing the throttle will automatically gradually decelerate until stopping. Moreover, the wheels of scooters are smaller than those of other vehicles, and the transmission part is mostly belt-driven, commonly referred to as women's motorcycles. The scooter refers to its wide foot pedal between the seat and the handlebars, allowing riders to comfortably place their feet on it while riding, just like sitting on a chair, without needing to straddle the vehicle as with other motorcycles. 2. Methods to reduce fuel consumption: (1) Maintain normal cylinder pressure: Cylinder pressure is closely related to cylinder sealing performance. If the cylinder pressure is below 165350% of the standard value, it must be repaired in time, otherwise it will increase fuel consumption. (2) Choose high-quality tires: Tires with better wear resistance are a good choice, and since scooters have a lower chassis, tires are crucial.
3
2
Share

What is the fault when the DSTC system requires repair?

DSTC requiring repair indicates a fault in the anti-lock braking system, which needs to be checked at a repair shop. Below is relevant information about the anti-lock braking system: 1. Overview: The Anti-lock Braking System (ABS) is designed to automatically control the braking force during vehicle braking, preventing the wheels from locking up and maintaining a state of rolling and sliding (with a slip ratio around 20%), ensuring maximum traction between the wheels and the road. 2. Working Principle: During braking, ABS quickly determines the wheel lock-up state based on signals from each wheel speed sensor. It closes the normally open input solenoid valve for the wheel that begins to lock, keeping the braking force constant. If the wheel continues to lock, the normally closed output solenoid valve is opened, allowing the braking pressure on that wheel to rapidly decrease due to the direct connection to the brake fluid reservoir, preventing complete wheel lock-up caused by excessive braking force. This ensures the braking state remains at the optimal point (with a slip ratio S of 20%), achieving the best braking performance and the highest level of driving safety.
7
4
Share

What is the normal negative pressure for the EA888 PCV valve?

Negative pressure values between 8-20 are considered normal. Below is relevant information about the EA888: 1. Main engine model: The EA888 engine is the primary powertrain for Volkswagen Group's mid-to-high-end models, available in 1.8L and 2.0L displacements. It integrates advanced technologies such as direct fuel injection, turbocharging, and variable valve timing, earning widespread market recognition for its strong low-end torque, excellent fuel economy, and top-tier reliability. 2. Drawbacks: The EA888 series has three generations of products, with the second-generation EA888 engine being notorious for its design flaws, particularly oil consumption and leakage issues. Less severe cases may trigger the oil warning light at 7,000-8,000 km intervals requiring oil top-up, while severe cases may prompt warnings as early as 4,000-5,000 km or even 2,000-3,000 km.
12
3
Share

How to Enable the Lock Sound on T-Roc?

To set the lock sound for the Volkswagen T-Roc, follow these steps: 1. Press the brake pedal, shift the gear lever to P position, release the brake pedal, and press the one-touch start button twice consecutively; 2. Close all doors, then press and hold the lock button on the driver's door for more than 10 seconds. Below is some relevant information about the T-Roc: 1. Interior-wise, the T-Roc's cabin design follows Volkswagen's signature family style, featuring a dashboard slightly tilted towards the driver. It comes equipped with a multifunction steering wheel, large central touchscreen, automatic air conditioning, panoramic sunroof, etc. 2. Dimensions: The vehicle measures 4318mm in length, 1819mm in width, and 1582mm in height, with a wheelbase of 2680mm. It is paired with a 7-speed dry dual-clutch transmission, achieving a top speed of 200 km/h.
12
0
Share

Why is there a burnt smell during sudden acceleration with CVT?

It is caused by the friction of the clutch plates. Here is the relevant information: 1. Avoid prolonged sudden acceleration: Long-term high-speed sudden acceleration is an abnormal condition for the engine. Rapidly pressing the accelerator increases fuel injection, which may lead to incomplete combustion and carbon buildup. Excessive RPM and frequent sudden acceleration can also cause the engine to overheat, reducing its sealing performance. 2. CVT shifting structure: The core shifting structure of a CVT includes two sets of hydraulically controlled cone pulleys with variable angles, which clamp a steel belt. During shifting, the cone pulleys change their angles "bit by bit" under hydraulic control, and the synchronized angle changes alter the steel belt's angle, thus changing the gear ratio. The key term is "bit by bit," where the numbers can be infinitely small, meaning each tiny change in the cone pulley angle represents a "gear." Since the numbers are infinitely small, the gears are effectively infinite, making upshifting a continuously variable transmission with no distinct gear levels.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.