What does clocking in for driver's license training mean?

2 Answers
Albert
07/28/25 9:28pm
Clocking in for driver's license training means receiving a card from the driving school. When you practice driving, the instructor will ask you to insert the card to start accumulating training hours. Below is relevant information about clocking in for driver's license training: 1. New regulations on training hours: It is understood that although driving schools previously had certain requirements for students' practice time, whether students could take the exam was not closely related to practice time but directly linked to their driving proficiency. As long as they met the exam requirements, they could take the exam. After the implementation of the new regulations, the syllabus specifies corresponding training hours, and students can only schedule the exam after completing the required hours. 2. Combating illegal and non-compliant behaviors: It is reported that joint penalties will be imposed for illegal and non-compliant behaviors such as driving training institutions reducing training content and hours, falsifying or tampering with training system data, and improperly issuing training completion certificates. If these behaviors constitute a crime, legal responsibility will be pursued according to the law.
Was this review help?
2
4
Share
LaRemington
08/12/25 2:06am
When I first started learning to drive, I was quite confused by the term 'clocking in,' which sounded like signing in for work. Actually, it refers to the driving school's requirement for us to use an app or in-car device to record our training time before each driving lesson or class. The purpose is to ensure we meet the mandatory learning hours, such as the legally required 20 hours of theory and 20 hours of practical training, which must be completed before taking the exam. I think this system is great—it prevents beginners from rushing into exams and causing accidents. The clock-in system automatically accumulates training time, avoiding fake training sessions. I remember once forgetting to clock in during my lessons, which set me back and required extra paid classes. Safe driving is no joke, and clocking in ensures everyone gets the basic training. Don’t underestimate it—diligently clocking in can save you from unnecessary detours.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to replace the battery in an old Mercedes-Benz B180CDI key?

Method for replacing the battery in an old Mercedes-Benz B180CDI key: 1. Push the sliding switch on the back of the remote to remove the mechanical key; 2. Insert the mechanical key into the prying hole on the remote and push firmly to the bottom, the back cover will pop open automatically, then remove the back cover of the remote; 3. Take out the old battery from the remote key and quickly replace it with a new one, ensuring the new battery is installed within 30 seconds. The dimensions of the Mercedes-Benz B180CDI are 4359mm in length, 1786mm in width, and 1558mm in height, with a wheelbase of 2699mm. The car's multimedia features include GPS navigation system, LCD screen on the center console, built-in hard drive, car TV, and rear LCD screen.
14
1
Share

What Items Are Generally Replaced During Car Maintenance?

During car maintenance, the following items are generally replaced: engine oil, fuel, transmission fluid, brake fluid, power steering fluid, engine antifreeze coolant, windshield washer fluid, battery water, engine oil filter, air filter, fuel filter, cabin air filter, spark plugs, brake pads and rotors, clutch, wiper blades, sealing strips, timing belt, tires, battery, and other wear-and-tear or consumable items. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. The purpose is to maintain a clean appearance, normal technical condition, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
4
2
Share

What Causes Car Leakage?

The reasons for car leakage are: 1. Door leakage: usually caused by aging window waterproof strips or blocked door drainage holes; 2. Sunroof leakage: in most cases, it is due to clogged sunroof drainage holes; 3. Water accumulation in the trunk: generally caused by poor sealing of the trunk seal or poor sealing of the tail light seal; 4. A drainage hole on the fuel tank cap, as the fuel tank opening faces upwards, which can easily lead to water accumulation on the fuel tank cap. If your car is leaking, you can only go to a 4S store or a professional auto repair shop for treatment, letting the staff fix it. You can first clean the accumulated water inside the car with a dry towel or a water scooping tool, then repair the leaking part.
10
3
Share

How to Step on the Accelerator in an Automatic Transmission Car?

When stepping on the accelerator in an automatic transmission car, you should ease off the accelerator slightly each time the car reaches the corresponding RPM and shifts up a gear, then press the accelerator again. The main reasons are as follows: Some car owners believe that when driving on the highway, they only need to put the car in D gear and drive all the way. This understanding is very one-sided. Because there are also gears inside the automatic transmission, which need to be adjusted according to the vehicle speed, accelerator, and load. The process of adjusting gears requires response time. It will not immediately jump to a higher gear, nor will it immediately drop to a lower gear just because you reduce the pressure on the accelerator. Keeping the accelerator floored for a long time will cause wear and tear on the transmission.
14
2
Share

How to Replace the Wiper Blades on a Buick LaCrosse?

The method for replacing the wiper blades on a Buick LaCrosse is as follows: 1. Pull the windshield wiper assembly away from the windshield. 2. Press the button in the middle of the wiper arm connector and pull the wiper blade away from the wiper arm connector. 3. Remove the wiper blade; replace it with a new prepared wiper blade. 4. Follow the reverse order of steps 1-3 to replace the wiper blade. Additional methods to determine if the wiper blade needs replacement are as follows: 1. Lift the wiper and run your finger along the cleaned wiper rubber to check for any damage and the elasticity of the rubber blade. If the blade is aged, hardened, or cracked, it needs to be replaced. 2. When light rain falls, if the wiper leaves uneven wiping marks on the glass, affecting visibility, this indicates that the wiper has hardened and needs replacement.
11
4
Share

How to Start a Volvo Automatically?

Here is the method for starting a Volvo automatically: Most Volvo models with a one-touch start can start the engine by pressing the one-touch start button. However, some Volvo models have a knob next to the gear shift lever. After entering the car with the key, turning the knob will start the engine. Additional Information: Before starting an automatic transmission car, it is essential to press the brake pedal and ensure the gear is in the P position. The P gear has a locking mechanism; engaging P without pulling the handbrake can cause wear to the mechanism. Keeping the gear in D when the vehicle is stationary can wear out the transmission. Before turning off an automatic transmission car, shift to P gear; only then can the engine be turned off.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.