···
Log in / Register

What does China VI vehicle mean?

5 Answers
DelMadison
09/02/25 5:25am
China VI vehicle refers to models that comply with the China VI emission standards. Automotive emissions refer to harmful gases such as CO (carbon monoxide), HC plus NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot) discharged from vehicle exhaust, which are generated during the engine combustion process. Compared to China V standard gasoline and diesel, China VI fuel reduces carbon monoxide emissions by 50%, lowers the total hydrocarbons and non-methane hydrocarbon emission limits by 50%, decreases nitrogen oxide emissions by 42%, and contains fewer harmful components than China V fuel. This effectively reduces engine carbon deposits and significantly minimizes damage to vehicles and machinery.
Was this review help?
14
0
Share
ConnorLee
09/14/25 7:34am
A China VI vehicle refers to a vehicle that complies with our country's sixth-stage automobile emission standards, which are stricter than previous ones and specifically designed to reduce pollutants in exhaust gases such as nitrogen oxides and particulate matter. I think choosing it is particularly meaningful for environmental protection because with fewer of these harmful substances, urban air quality will improve, especially in areas with heavy smog—driving a China VI vehicle directly helps lower pollution indices. As someone who cares about the environment, I’ve found that promoting the China VI standard not only protects health but also saves resources—in the long run, there may be fewer repairs and longer vehicle lifespans. I recommend everyone prioritize China VI vehicles when replacing cars, as it can avoid future traffic restriction policy hassles while fostering green travel habits. This small choice can greatly benefit the planet.
Was this review help?
15
0
Share
Expand All
AaliyahMarie
09/14/25 7:36am
Recently, I switched to a China VI-compliant vehicle, and the driving experience is noticeably different. The exhaust emissions are much cleaner, without the unpleasant odors of my old car. The price is similar to China V vehicles, but it's more fuel-efficient, and the optimized engine provides better power. In major cities like Beijing, Shanghai, and Guangzhou, where traffic restrictions are strict, China VI cars usually have unrestricted access, making them very convenient for daily commutes. When purchasing the car, I also looked into the two phases of China VI standards—Phase A and Phase B—with Phase B being more stringent but hassle-free. Overall, the car drives smoothly with no major issues, helps reduce environmental impact, and is a practical choice.
Was this review help?
15
1
Share
Expand All
McLucia
10/28/25 8:17am
Simply put, China VI vehicles are cars that meet the latest domestic emission regulations, requiring significant reductions in pollutants including particulates and gases. The standards have modified sensors and treatment systems, such as adding particulate filters to clean exhaust, making the vehicles run more efficiently. For car owners, understanding these details helps in selecting models that comply with the new technology, ensuring safety and reliability.
Was this review help?
7
4
Share
Expand All
VanNatalie
12/11/25 8:33am
After the implementation of China VI vehicles, the air quality in the city has improved significantly. I read in reports that the PM2.5 concentration in Beijing and Shanghai has decreased, partly due to the new emission standards. As a resident, choosing a China VI vehicle not only makes personal life easier but also reduces the societal healthcare burden—cleaner air means better health. The government is using policies to push automakers to upgrade, and together we can build a cleaner home.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What Causes Unstable Engine Idle Speed with Fluctuating RPM?

Engine idle speed instability with fluctuating RPM is caused by: oil accumulation and carbon buildup in the throttle body, excessively dirty intake passages, fuel system blockages (particularly in fuel injectors), and intake manifold malfunctions. Unstable idle speed is one of the most common engine faults, ranging from minor to severe issues. Normally, engine idle speed should remain constant. Generally, higher idle speeds lead to increased fuel consumption, while excessively low idle speeds may cause engine vibration or even stalling. Oil accumulation and carbon deposits in the throttle body, along with dirty intake passages: Blocked intake passages can cause idle speed fluctuations. Carbon buildup or oil presence in the throttle body is a frequent cause of idle instability. Throttle body carbon deposits affect its opening angle, disrupting air intake volume. This results in erratic RPM fluctuations during cold starts, accompanied by noticeable vibration.
2
5
Share

Are the Engines of the Tracker and the Orlando the Same?

The Tracker and the Orlando share the same engine, which is a 1.3T turbocharged engine. Although both vehicles are equipped with engines of the same displacement, the tuning of these engines in terms of power output differs. The engine in the Orlando produces a maximum power of 120 kW and a maximum torque of 230 Nm, while the engine in the Tracker delivers a slightly higher maximum power of 121 kW and a maximum torque of 240 Nm. In terms of dimensions, the Orlando measures 4684 mm in length, 1807 mm in width, and 1628 mm in height, with a wheelbase of 2796 mm. The Tracker, on the other hand, measures 4411 mm in length, 1808 mm in width, and 1633 mm in height, with a wheelbase of 2640 mm.
2
5
Share

How to Replace the Air Conditioning Filter of Baojun 730?

Baojun 730 air conditioning filter replacement method: Located in the glove compartment on the passenger side, after removing the glove box, open the cover to see the filter. Pull out the old filter, replace it with a new one, and then reinstall it in the reverse order. The air conditioning filter is a filter installed in the car's air conditioning system, which can absorb dust particles, reduce respiratory discomfort, minimize irritation for allergy sufferers, and protect the air conditioning cooling system. The Baojun 730 is an MPV model under the Baojun brand. In terms of body dimensions, it measures 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. Power-wise, the Baojun 730 is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine.
18
2
Share

Why Does the Steering Wheel Feel Heavy?

The reasons for a heavy steering wheel include: 1. Insufficient power steering fluid, which requires timely maintenance or adding/replacing the power steering fluid; 2. Low tire pressure, which increases the contact area between the tires and the road surface, leading to greater friction and difficulty in steering, resulting in a heavy steering wheel that is detrimental to driving safety—promptly replenishing tire pressure is necessary in such cases; 3. Overly tight bearing fit; 4. Power steering system issues, which should be addressed based on the actual situation. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and mounting clips or screw holes corresponding to the driver's airbag (DAB).
7
3
Share

Where is the Citroen C4L's cabin air filter located?

Citroen C4L cabin air filter location: Open the hood, remove the sound insulation cotton, and you will see it. You can replace the cabin air filter yourself. The cabin air filter is a filter installed in the car's air conditioning system that can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. The Citroen C4L has dimensions of 4675mm in length, 1780mm in width, and 1500mm in height, with a wheelbase of 2710mm. It is a 4-door, 5-seater sedan equipped with a 5-speed manual transmission and a 1.2T L3 turbocharged engine, delivering a maximum horsepower of 136ps and a maximum torque of 230nm.
18
2
Share

What are the drawbacks of a conventional differential?

The drawbacks of a conventional differential: Due to a wheel being suspended and spinning freely, once such a situation occurs, the differential continuously transmits power to the free-spinning wheel without resistance. As a result, the vehicle not only fails to move forward but also loses a significant amount of power. The differential is designed to create speed differences between the wheels, allowing for reasonable torque distribution between the left and right wheels during turns to achieve proper turning effects. When the engine's power passes through the clutch, transmission, and driveshaft, and undergoes speed reduction and torque increase via the axle's final drive, it then faces the task of torque distribution between the left and right wheels. This enables the wheels to rotate at different speeds, allowing them to travel unequal distances in as pure a rolling motion as possible, thereby reducing friction between the tires and the ground. This is the so-called differential process.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.