What does China V mean?

1 Answers
VonGabriel
07/29/25 2:36pm
China V refers to the National Fifth Stage Emission Standard for Motor Vehicles, also known as the China V standard. The methods to check a vehicle's emission standard are: 1. Check the motor vehicle conformity certificate; 2. Look for the vehicle packing list; 3. Log in to the motor vehicle exhaust pollution supervision and management website; 4. Check the back of the environmental protection label on the car's front windshield; 5. Bring the vehicle registration form to the vehicle management office for inquiry. The main pollutants emitted by vehicles include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. Through the application of technologies such as the active layer of catalytic converters, secondary air injection, and exhaust gas recirculation systems with cooling devices, these vehicle emission pollutants are controlled and reduced to levels below the specified standards.
Was this review help?
16
2
Share
More Forum Discussions

What are the components of a tire?

Automobile tire materials are primarily composed of natural rubber or synthetic rubber. Natural rubber has superior comprehensive performance compared to synthetic rubber, which is why premium tires often use natural rubber. To endow the rubber with the properties required for tire manufacturing, various chemical materials, known as chemical additives, must be blended into the rubber. Additional information: 1. Composition: Tires are typically made up of three parts: the outer tire, the inner tube, and the flap. Some tires do not require an inner tube, as they feature an inner layer of rubber with excellent air retention properties and must be used with specialized rims. Tire structures worldwide are evolving towards tubeless designs, radial structures, flat profiles (with a low ratio of tire section height to width), and lightweight construction. 2. Outer tire: The outer tire consists of the carcass, the breaker (or belt layer), the tread, the sidewall, and the bead. The cross-section of the outer tire can be divided into several distinct zones: the crown area, the shoulder area (tread slope), the flex area (sidewall area), the reinforcement area, and the bead area.
8
1
Share

Which BYD model features automatic parking?

BYD's model featuring automatic parking is the newly launched Han model. 1. Introduction to the automatic parking system: The automatic parking system can only be used for parallel parking and is not available for perpendicular parking. However, preparations for perpendicular parking are also in place. When perpendicular parking is needed, dynamic reversing guide lines will appear on the multimedia display system. Simply follow the direction indicated by the guide lines on the display to easily reverse into the parking space. 2. APA Automatic Parking Assist System: BYD has introduced the new intelligent driving assistance system DiPilot. BYD DiPilot incorporates big data algorithms and is named DiTrainer. The APA Automatic Parking Assist System is one of the key features of BYD DiPilot. The Han model's APA Automatic Parking Assist System consists of 8 short-range ultrasonic sensors + 4 long-range ultrasonic sensors + 4 high-definition panoramic cameras + 1 controller. The Han model is the first to be equipped with the APA Automatic Parking Assist System, and this feature is pre-installed at the factory. It can be activated through a later upgrade.
2
0
Share

Does a cut on the tire require replacement?

It is recommended to replace the tire. You can feel the depth of the "wound" with your hand. Generally speaking, the rubber layer of a tire has a certain thickness, but for the sidewall of the tire, this is a weak spot. The rubber thickness here is not enough to provide sufficient and effective protection for the tire. If you can see a cut on the sidewall of the tire with the naked eye, one thing is certain—the scratch is no longer shallow and may even compromise the structure of the tire. Additional tips: 1. Pay attention to tire pressure: Both excessively high and low tire pressure can cause abnormal wear and shorten the tire's lifespan. During the harsh winter and summer seasons, you can adjust the tire pressure regularly based on recommendations from maintenance service stations. 2. Avoid sudden acceleration when driving: A sudden start from a stationary state causes intense friction between the tire and the road surface, accelerating tread wear. 3. Reduce emergency braking: Emergency braking worsens localized tread wear and can easily lead to tire bulges or delamination. It is advisable to use coasting to slow down more often and minimize the use of braking, especially emergency braking.
16
4
Share

Is Oil Burning a Common Issue with the Highlander?

For some older Highlander models, oil burning is a relatively normal phenomenon. There are many causes of oil burning, such as improper oil usage, lack of maintenance, poor cylinder sealing, weak valve seal performance, damaged crankcase ventilation valve, or clogged crankcase ventilation ports, all of which can lead to oil burning. The above reasons can accelerate oil consumption, resulting in oil burning and causing the following vehicle issues: 1. Poor sealing: Carbon buildup in the combustion chamber can cause the piston rings to stick, leading to poor sealing. 2. Weak oil-scraping performance: Sludge in the lubrication system can clog the oil return holes of the oil rings, weakening oil-scraping performance. 3. Wear: Wear occurs between the pistons and cylinder walls. 4. Sealing failure: Corrosion and aging of the valve seals can cause sealing failure. Additionally, modern vehicles are equipped with a crankcase ventilation system (PCV valve), and if this system malfunctions, it can also exacerbate oil consumption. In the past, oil burning issues could only be resolved through disassembly and repair, but now there are solutions available that do not require disassembly.
11
0
Share

Which side of the spare tire faces outward?

Usually, tires with an inside and outside have an OUTSIDE mark (external mark) on the same side as the production date, so the tire production date is generally installed facing outward. If it is a symmetrical tread tire, there is no distinction between inside and outside during installation, but it is best to place the side with the production date on the outside. If it is a unidirectional tread tire, it should be installed in the direction of the arrow, which indicates the rolling direction of the wheel. Here is some additional information: 1. Tires: Tires are one of the most important components of a car. Their main functions include: supporting the entire weight of the vehicle and bearing the load of the car; transmitting traction and braking torque to ensure the adhesion between the wheels and the road; reducing and absorbing vibrations and impacts during driving to prevent severe vibrations and early damage to car components; adapting to the high-speed performance of the vehicle and reducing driving noise; ensuring driving safety, handling stability, comfort, and energy efficiency. 2. Specifications: Tire specifications are often represented by a set of numbers. The first number indicates the tire section width, and the second number indicates the rim diameter, both in inches. The letter or symbol in the middle has a special meaning: tire structure: "R" stands for radial tire, while "D" or "-" stands for bias tire.
7
5
Share

What does 280tsi mean?

280tsi indicates that this vehicle is generally equipped with a high-power version of the 1.4TSI engine. The number 280 represents the engine's torque output of 280 Nm, the 't' stands for turbocharged engine, the 's' signifies stratified, and the 'i' represents injection. TSI denotes a high-power, low-speed, high-torque engine. Volkswagen's new rear badges feature five designations: 180, 230, 280, 330, and 380, corresponding to the current lineup of 1.4L, 1.8L, and 2.0L displacement engines. The 180 represents a 1.2L turbocharged engine, 230 denotes a low-power engine, 300 signifies a 1.8L turbocharged engine, 330 stands for a 2.0L low-power engine, 380 indicates a 2.0L high-power engine, 530 represents a 2.5L turbocharged engine, and 480 denotes a 3.0L turbocharged engine. The main advantages of this engine include the use of aluminum cylinders with cast iron liners, which reduces the engine's weight, improves fuel economy, and lowers fuel consumption as the weight decreases. Turbocharging technology provides stronger power output.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.