What does China National V and China National VI mean for vehicles?

2 Answers
McZoey
07/24/25 1:53pm
China National V and China National VI are vehicle emission standards, which regulate the content of harmful gases such as carbon monoxide, PM, and soot emitted from vehicle exhaust. The transition from National V to National VI involves improvements in intake and exhaust efficiency, exhaust gas recirculation efficiency, etc., with the ultimate goal of reducing the levels of harmful gases. The National V standard imposes relatively strict limits on nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles emitted by motor vehicles. From National I to National V, each upgrade in the standard reduces vehicle pollution by 30% to 50%. The China National VI standard requires a 50% reduction in carbon monoxide emissions from gasoline vehicles, a 50% decrease in the emission limits for total hydrocarbons and non-methane hydrocarbons, and a 42% stricter limit on nitrogen oxide emissions.
Was this review help?
13
2
Share
WilliamDella
08/11/25 7:49am
I recently researched China's vehicle emission standards, and found that China V and China VI are essentially environmental regulations established by China to control exhaust pollution from vehicles. The China V standard was introduced around 2017, requiring new vehicles to reduce harmful substances like carbon monoxide and nitrogen oxides. Many automakers had to upgrade engine technologies to comply at that time. The China VI standard is even stricter, being implemented in phases starting from 2020. It not only lowers pollutant limits but also mandates devices like particulate filters to reduce dust emissions. My friends always ask about the emission standard when buying cars, because China VI vehicles are more environmentally friendly though slightly more expensive, but beneficial for air quality improvement in the long run. These standards are driving the automotive industry's transformation, gradually phasing out older models, and have contributed to reducing smog in our cities. I believe we should pay more attention to emission labels when buying used cars or replacing vehicles, avoiding cheaper but more polluting older models.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

Why are the production dates of car windows different?

It is normal for the production dates of car windows to be different, as long as the production date of the window is earlier than the manufacturing date of the entire vehicle, there is no problem. This is because car windows are installed after the car is produced. Car windows are uniformly purchased by the manufacturer, and they are purchased in advance. Since the purchase batches are different, the dates will naturally vary. Any unused windows from one batch will be installed on the next vehicle. Car windows and the car itself are two completely separate parts; the production of the car does not mean the windows are produced at the same time. During the later installation of the windows, they are randomly installed according to the production batches of the windows, so it is normal for the dates to be different.
8
0
Share

Reasons for Mercedes-Benz Auxiliary Battery Failure?

Mercedes-Benz auxiliary battery failure reasons are as follows: 1. Auxiliary battery fuse damage. 2. Auxiliary battery damage. 3. Generator or charging system failure. 4. Related wiring harness failure. Solution for Mercedes-Benz auxiliary battery failure: Must be repaired at a 4S shop, cannot be automatically eliminated. More information about auxiliary battery failure: 1. When the auxiliary battery fails, it can cause slow car startup, some circuit control issues or insufficient power, etc. It may also lead to excessively low voltage in the car battery pack, resulting in other faults. 2. A faulty Mercedes-Benz auxiliary battery indicates an issue with the vehicle's engine battery, which should not be taken lightly. Once the auxiliary battery fails, many functions may become inoperative, such as auto start-stop, reverse radar, seat heating, HOLD function, etc.
16
4
Share

What does the Subject 3 test include?

Subject 3 test includes the road driving skills test and the safety and civilized driving knowledge test. The details are as follows: 1. The road driving skills test includes: preparation before getting on the car, light simulation test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school areas, passing bus stations, meeting vehicles, overtaking, turning around, and driving at night. 2. The safety and civilized driving knowledge test includes: safety and civilized driving operation requirements, safe driving knowledge under bad weather and complex road conditions, emergency handling methods in case of tire blowout and other emergencies, and handling knowledge after traffic accidents.
4
5
Share

Transfer Ownership First or Vehicle Inspection First?

Complete the annual vehicle inspection before transferring ownership. Below are the relevant details about the inspection: 1. Introduction: For vehicles that have already obtained official license plates and registration certificates, the inspection is conducted based on the technical conditions for safe operation of motor vehicles. The purpose is to examine the main technical conditions, encourage enhanced maintenance, ensure the vehicle remains in good condition, and guarantee driving safety. 2. Items covered in the vehicle inspection: (1) Check whether the engine, chassis, body, and their attached equipment are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether major assemblies have been replaced; and whether they match the initial inspection records. (2) Verify that the braking performance, steering control, lighting, exhaust, and other safety features meet the required standards.
10
1
Share

What causes the Hyundai ix35 one-touch start to malfunction?

Hyundai ix35 one-touch start malfunction may be caused by a dead remote key battery or a damaged receiving module inside the vehicle. When this occurs, first check whether the key battery has power. If the battery is dead, replace it with a new one. If the battery has power, then inspect whether the vehicle's receiving module and the key's transmitting module are functioning properly. The Hyundai ix35 is a compact SUV under the Hyundai brand, with body dimensions of 4420mm in length, 1820mm in width, and 1690mm in height, and a wheelbase of 2640mm. In terms of power, the Hyundai ix35 is equipped with two engines: a 1.4-liter turbocharged engine and a 2.0-liter naturally aspirated engine.
6
4
Share

Where is the air conditioning filter located in a Golf?

Golf air conditioning filter is located behind the glove compartment and needs to be removed for replacement. Golf air conditioning filter replacement tips: 1. If the airflow from the air conditioner is significantly reduced, the air conditioning filter may be clogged. First, clean the filter or replace it if necessary. 2. The frequency of cleaning depends on road conditions (dusty roads, etc.), and it is recommended to clean it earlier. 3. The air conditioning filter should be properly installed in its position. Using the air conditioner when the filter is removed may degrade dust-proof performance and affect air conditioning performance. 4. In cities with poor air quality, it is recommended that car owners replace the air conditioning filter twice a year to ensure your health.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.