What does Chevrolet's 48V mild hybrid mean?

2 Answers
VanReid
07/24/25 5:26am
Chevrolet's 48V mild hybrid refers to the 48V mild hybrid system. Advantages of the 48V mild hybrid system: Since the generator and starter motor in a conventional 12V electrical system are designed separately, the starter motor is only used for starting. In contrast, the integrated starter motor in a 48V system can directly participate in power output, improving the vehicle's power performance and reducing fuel consumption. The 48V system can power various electrical devices, reducing the load on the internal combustion engine. For example, a belt-driven air conditioning compressor can be replaced with an electric air conditioner. Disadvantages of the 48V mild hybrid system: The drawbacks of this system include high maintenance costs due to its highly integrated nature, increased complexity of the powertrain, and a higher failure rate. Overall, it is not as durable as the traditional 12V system.
Was this review help?
11
4
Share
DiCassandra
08/11/25 1:06am
As someone with in-depth knowledge of automotive technology, I can explain that Chevrolet's 48V mild hybrid system is an innovative hybrid design. The '48V' refers to the 48-volt battery, while 'mild hybrid' indicates a light hybrid system, meaning it adds a small motor and battery pack to the traditional engine. This system connects to the engine via a belt, helping to recover energy wasted during braking and store it in the battery; during acceleration, it provides extra torque, making the car more powerful, and the start-stop function is smoother without jerking. This can reduce fuel consumption by about 10-15%, making it environmentally friendly and reducing emissions. Widely used in Chevrolet models like the Malibu, it offers a cost-effective yet significant improvement in driving efficiency, making it a practical upgrade for both fuel economy and driving experience. In the long run, it avoids the complexity of major structural changes to the car, making daily driving more economical and hassle-free.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

What Components Make Up the Rear Axle of a Vehicle?

Rear axle consists of the drive shaft and transmission gears. The rear axle of a vehicle refers to the axle located at the rear. In front-wheel-drive vehicles, the rear axle merely serves as a trailing axle, primarily bearing the load. Below is an introduction to the impact of replacing the rear axle on a car and the functions of the rear axle: Impact of replacing the rear axle on a car: The rear axle affects the four-wheel alignment data of the vehicle. Some vehicles adjust wheel data based on the rear axle. If the rear axle of a sedan is deformed or the rear axle shaft is bent, it not only causes the load to concentrate on the inner shoulder of the inner tire during driving but also reduces the tire's contact area with the ground, increasing the pressure per unit area and accelerating wear on the inner tire. Additionally, the vehicle may sway from side to side during driving, leading to sawtooth or irregular wear on the tire shoulders. Functions of the rear axle: The power transmitted from the clutch, gearbox, and drive shaft is reduced in speed and increased in torque through the reducer, which then transfers this torque to the drive wheels via the half-shafts. It bears the load of the rear axle. The reaction forces and moments from the road surface are transmitted to the frame through the leaf springs. During driving, the rear wheel brakes play a major role in braking, and during parking, the rear wheel brakes provide the parking brake function.
6
3
Share

What does it mean when the TPMS warning light is on?

The TPMS light is a tire pressure fault warning light, indicating that the pressure in one of the tires may be too low. Here is a related introduction to common faults in vehicle operation: Abnormal tire wear: Uneven wear on one side or a specific area of the tire surface. Possible causes include insufficient or excessive tire pressure, excessive or insufficient toe-in or camber angle, unbalanced wheels, prolonged lack of tire rotation, loose wheel hub bearings, excessive wear of steering column pins or ball joints, improper driving habits, etc. Noise from the front and rear axles or suspension. Possible causes include excessive wear or damage to moving parts of the front and rear axles or suspension, excessive bearing clearance or bearing damage, loose fastening bolts, lack of oil or damage to shock absorbers. Vehicle pulling to one side: The vehicle deviates from the direction controlled by the steering wheel while driving. Possible causes include deformation of connecting parts of the front and rear suspension or frame deformation, changes in the connection positions of the front and rear axles and suspension, misalignment of front wheel positioning, significant differences in tire pressure or wear between the two sides, etc.
12
3
Share

What is the process for reporting an accident to the insurance company?

The general process is as follows: Reporting the accident, on-site inspection and damage assessment, signing and reviewing the claim documents, approval, and settlement of the claim. The process may vary depending on the insurance company, but these are the basic steps. Details are as follows: Reporting the accident: In the event of an accident, the first step is to promptly inform the insurance company and request their immediate assistance. It's important to note that if there are any injuries or fatalities, you should also call 120 for emergency medical assistance and 122 (the traffic police hotline; calling 110 is also acceptable). On-site inspection and damage assessment: Once the insurance company personnel arrive, they will conduct an on-site inspection and assess the damage. At this stage, they will typically ask the policyholder to provide relevant documents and fill out claim forms. Signing and reviewing the claim documents: Simply put, this is when the insurance company reviews the accident claim. If there are any issues, they will inform the policyholder of any additional documents required and return the claim. If everything is in order, this step is completed. Approval: The final approval by the insurance company. Settlement of the claim: The insurance company disburses the payment.
4
1
Share

Where is the horn located in a Volkswagen car?

In Volkswagen cars, the horn is generally located on the outer side of the front bumper beam, though its exact position may vary slightly depending on the model's design. Below are the classifications of car horns and precautions for their use: Classifications of car horns: By sound power, they are divided into air horns and electric horns; by shape, they are classified into cylindrical, spiral, and disc types; by frequency, they are categorized into high-pitch and low-pitch horns. Precautions for using car horns: When washing the car in winter, ensure the horn does not get wet. If the horn gets wet, dry it with an air gun as soon as possible. If the horn malfunctions, seek help from a professional technician instead of replacing it blindly to avoid unnecessary waste. Do not hold the horn button for too long, as prolonged use may cause the horn to burn out.
3
1
Share

How to Deal with Frost on Cars in Winter?

Winter car frost treatment methods are as follows: Turn on the car's air conditioning, set it to external circulation or direct the air vents towards the windows. Use a specialized plastic scraper for vehicle defrosting and snow removal to gently scrape the frost off the glass along one direction. A bank card can also be used as a substitute, but be careful to avoid scratching the glass. Use a specialized vehicle defrosting spray, applying it to the frosted windows. Vehicle defrosting sprays are high-speed anti-ice concentrated solutions specifically designed to thaw frozen windows and wipers, without damaging the car's surface and preventing re-icing. Use a dedicated frost cover to cover the car. Open the car doors to ventilate, equalizing the temperature inside and outside the car.
13
1
Share

How many generations of Corolla are there?

There are 12 generations of Corolla. The 10th generation (2006-2013), the 11th generation (2013-2018), and the 12th generation (2019-present). The Corolla is as follows: Basic configuration design: The new Corolla is built on Toyota's latest TNGA-C modular chassis with a globally unified exterior design. The exterior features LED headlights, LED daytime running lights, 18-inch wheels, and a sporty appearance. Interior and powertrain: The base model Corolla comes with fabric seats and a traditional lever-style handbrake, paired with a 7-inch color central control screen. The high-end version features leather seats, an electronic parking brake, auto start-stop, etc., with the central control screen upgraded to 8 inches and supporting Apple CarPlay and Android Auto. The instrument panel is also upgraded to a 7-inch LCD display. In terms of powertrain, the new Corolla is equipped with a 1.2T L4 turbocharged engine, delivering a maximum horsepower of 116 hp and a maximum torque of 185 Nm, paired with a CVT transmission that can simulate 10 gears.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.