What does car navi mean?

How to adjust the time on a Toyota Corolla?

Toyota Corolla time adjustment method: For older Corolla models, there are two small black knobs on the instrument panel, the left one can be used to adjust the time; For newer Corolla models, there is a reset button on the right. When the time is displayed, press and hold for 3 seconds to make the hour display blink, then short press to adjust the hour; press and hold for another 3 seconds to make the minute display blink, then short press to adjust the minutes; press and hold for another 3 seconds or do nothing to return to normal time display. In terms of power, the Corolla is equipped with a newly developed inline 4-cylinder 1.8L engine with dual VVT-i technology. Paired with either a 6-speed manual transmission or 4-speed automatic transmission, it delivers a maximum power of 103 kW and a peak torque of 175 Nm.

7

5

Share

What are the three leaks to check when stopping during driving?

When stopping during driving, the three leaks to check are water leakage, oil leakage, and air leakage. Water mainly refers to the coolant in the engine and the water in the cleaning reservoir. Oil mainly refers to engine oil, lubricating oil, power steering oil, and brake oil. Engine oil is located in the engine, lubricating oil is in the transmission, power steering oil is in the steering gear, and brake oil is in the braking system. Air refers to tire pressure and the air brake systems in some large passenger or freight vehicles. To check for oil or water leakage, wait for a while after stopping and inspect the ground for fresh oil or water stains. To check for air leakage, listen for any hissing sounds or observe if the pressure gauge shows a decrease after stopping.

2

5

Share

Where is the engine number located on the Volkswagen Sagitar?

The engine number of the Volkswagen Sagitar is located at the junction between the engine and the transmission. Due to its hard-to-find position, it is necessary to remove the air intake inlet and the air intake box, but the battery does not need to be disconnected. A wide-mouth pliers is required to remove the clip at the connection between the intake duct and the air box, which requires considerable force. After removal, the engine number will be visible. The Sagitar is a spacious A+ class comfortable sedan that perfectly combines German craftsmanship with modern dynamic styling, and comes standard with ESP electronic stability system. In terms of body dimensions, the Volkswagen Sagitar measures 4544mm in length, 1760mm in width, and 1461mm in height.

18

0

Share

What are the differences between the 9th and 9.5th generation Accord?

The differences between the 9th and 9.5th generation Accord are minimal. The specific details are as follows: Different headlight light sources: The headlights of the 9th generation Accord produce a granular light pattern, while the 9.5th generation Accord's headlights produce a striped light pattern. Additionally, the 9.5th generation's light source is brighter and has a longer range. Different powertrains: The 2.0L naturally aspirated engine in the 9.5th generation Accord 2.0 Luxury version has a maximum power of 114 and a maximum torque of 190. It uses multi-point electronic fuel injection, which is less prone to carbon buildup compared to direct injection engines. Different suspension systems: The 9.5th generation Accord 2.0 Luxury version features a multi-link independent rear suspension, providing better comfort for rear passengers. Different configurations: The 9.5th generation Accord 2.0L Luxury version is equipped with ESP, tire pressure monitoring, auto hold, hill start assist, and rear parking sensors, covering all mainstream configurations. The 9th generation Accord does not have such high-end configurations.

2

0

Share

What are the reasons for the automatic parking failure and hill descent control failure in Haval H6?

Automatic parking and hill descent control failure reasons are as follows: 1. Fault in PT-CAN related wiring or a certain node: Using a fault detector, it was found that the electronic parking control module (EPB) stored one current fault code, which is "U111281ESPCAN signal failure"; the body stability control module (ESP) also stored one current fault code, which is "U100104CAN passive error"; the engine control module (ECM) stored two historical fault codes, which are "U01018 Loss of communication with TCU" and "U012687 Loss of communication with SAS"; no fault codes were stored in other modules. Analyzing the fault codes, it is inferred that there is a fault in the PT-CAN related wiring or a certain node. 2. Poor internal circuit connection in the gateway causing low network voltage: Measuring the battery voltage, the voltage when the ignition switch was not turned on was 12.6V, the voltage when starting the engine was 10.9V, and the charging voltage was 14.3V, indicating that the battery is normal. Based on maintenance experience, it was decided to first check the network voltage of the SAS (airbag module). Disconnecting the SAS wire connector, the voltage on its terminal 2 (CAN-H) was measured to be 2.73V, and the voltage on terminal 3 (CAN-L) was 2.31V, which is normal. Subsequently, the SAS, ESP, and yaw rate sensor were replaced in sequence, but the fault persisted. Checking the electronic parking motor wire connector, there was no water ingress or poor contact. After re-securing CAN connector No. 1 and CAN connector No. 2, the fault was still not resolved. Measuring the voltage on CAN-H and CAN-L from CAN connector No. 1 (located inside the left rear C-pillar, connected to the ESP) was found to be 1.5V, which is low. Since the related wiring showed no abnormalities and the network voltage is provided by the gateway, it is suspected that poor internal circuit connection in the gateway is causing the low network voltage.

17

1

Share

Is the S90 an Imported Vehicle?

The S90 is an imported vehicle, introduced into the Chinese automotive market through import channels. This model also has a domestically produced version, named the S90L. In terms of appearance, there is not much difference between the imported and domestically produced models. The front fascia still adopts Volvo's family-style design, featuring a vertical waterfall-style grille with a concave design, paired with Thor's Hammer headlights, giving the car's front a more refined look. The imported model uses a standard wheelbase, while the domestically produced version features a long-wheelbase design. Regarding dimensions, the imported model measures 4,963 mm in length, 1,890 mm in width, and 1,443 mm in height, with a wheelbase of 2,941 mm. Under the hood, the S90 is powered by a 2.0-liter turbocharged engine, delivering a maximum power of 184 kW and a peak torque of 350 Nm. The engine reaches its maximum power output at 5,400 to 5,700 rpm. It is equipped with a 48V mild hybrid system, direct fuel injection technology, and an aluminum alloy cylinder head and block.

14

0

Share

What does car navi mean?

How to adjust the time on a Toyota Corolla?

What are the three leaks to check when stopping during driving?

Where is the engine number located on the Volkswagen Sagitar?

What are the differences between the 9th and 9.5th generation Accord?

What are the reasons for the automatic parking failure and hill descent control failure in Haval H6?

Is the S90 an Imported Vehicle?

What is the solution for lost Audi anti-theft screws?

Can a car with oil burning still be driven?

What are the reasons why an automatic transmission sometimes cannot engage a gear?

How to Determine When to Change Engine Oil in a Car