What does car code mean in Chinese?

1 Answers
SadieMarie
07/29/25 4:12pm
Car code represents the meaning of indicating the need for indicator light (fault light) self-check. Here is some introduction about car code: 1. Car code is the system of the car detection chip. If the chip cannot be detected, the dashboard will light up. When this sign lights up, the driver cannot start the car. Attempting to ignite multiple times will lock the engine, commonly known as engine anti-theft. 2. Working principle: The car ignition key contains an electronic chip, and each chip has a fixed ID (equivalent to an identification number). Only when the ID of the key chip matches the ID on the engine side can the car be started.
Was this review help?
1
5
Share
More Forum Discussions

What is the fuel consumption of the BYD Song Pro?

The fuel consumption of the BYD Song Pro is 8.9L/100km. Below are specific details about the fuel consumption: 1. Vehicle weight: The BYD Song Pro is an SUV. Its body is relatively large and heavy, leading to higher fuel consumption. 2. Engine displacement: A larger engine displacement provides greater power but requires more fuel, resulting in higher fuel consumption. 3. Road conditions: Fuel consumption is lower when driving on highways because the engine operates more stably at lower RPMs. In contrast, driving in congested areas or cities with frequent starts and stops leads to higher fuel consumption. 4. Driving habits: Gentle driving results in lower fuel consumption, while aggressive driving increases it.
11
4
Share

What kind of engine oil is used for the DX7?

The original factory-specified engine oil model for the Southeast DX7 is 5W30 fully synthetic oil. Engine oils are divided into three categories, with differences as follows: 1. Mineral oil: A commonly used lubricant in the market. Essentially, it utilizes the inferior components of crude oil. Mineral oil is inexpensive but has a shorter lifespan and inferior lubrication performance compared to synthetic oil, and it also causes greater environmental pollution. Additionally, mineral oil cannot completely remove impurities during the refining process, resulting in a higher pour point, making it unsuitable for use in extreme cold conditions. 2. Semi-synthetic oil: A product refined from mineral oil using hydrocracking technology. It is a mixture of mineral oil and fully synthetic oil in a 4:6 ratio. Semi-synthetic oil's purity is very close to that of fully synthetic oil, but its cost is slightly higher than mineral oil, making it an ideal transitional product from mineral oil to synthetic oil. 3. Fully synthetic oil: Fully synthetic oil is a high-grade oil among engine oils. It is derived from ethylene and propylene dispersed from natural gas or crude oil, which undergo complex chemical reactions like polymerization and catalysis to form a lubricating fluid composed of large molecules. Essentially, it uses the superior components of crude oil, subjected to chemical reactions and controlled to achieve the desired molecular structure. Fully synthetic oil has neatly arranged molecules, strong resistance to external variables, excellent thermal stability, oxidation resistance, and viscosity stability compared to mineral and semi-synthetic oils, but it is also the most expensive.
3
5
Share

What is the wading depth of the Volkswagen Lamando?

The wading depth of the Volkswagen Lamando is 20-30 centimeters. Below are the relevant details:1. Exhaust pipe: The height of the exhaust pipe can visually indicate the water level at which water may enter. However, even if water enters the exhaust pipe, it will not cause the vehicle to stall. But if the vehicle is submerged too deeply, water entering after an accidental stall can cause permanent damage to the catalytic converter due to sudden temperature changes.2. Precautions: After wading, check the dust cover of the universal joint ball cage in the steering system. If the dust cover is damaged, water from wading may enter the universal joint ball cage, leading to loss of power steering and potential steering lock-up.
15
1
Share

What should be paid attention to when replacing brake pads?

When replacing brake pads, the following points should be noted: 1. During brake pad replacement, special attention must be paid to grinding the edges and corners. Generally, brake pads come with a pre-cut bevel from the factory, commonly known as a "chamfer." In addition to this "chamfer," the edges of the entire friction surface also need to be ground. This process is essentially noise matching. This is because after tens of thousands of kilometers of "intimacy" between the old brake pads and the brake disc, they have formed a certain complementary shape. 2. After replacing the brake pads, try to avoid heavy braking, and especially avoid sudden braking. This is because the friction surface of the new brake pads cannot fully conform to the surface of the brake disc. 3. After installing new brake pads, it's crucial to perform a proper break-in period to ensure the brake pads quickly achieve good conformity with the brake disc, thereby ensuring optimal braking performance.
10
4
Share

How to Reset the Maintenance Light on Soueast V5 Lingzhi

Soueast V5 Lingzhi requires the following steps to reset the maintenance light after each scheduled service: 1. Turn off the ignition switch. 2. Press and hold the trip meter reset button on the instrument cluster. 3. Turn on the ignition switch. 4. The odometer display will begin counting down. When the display shows 0000.0, release the button. The wrench indicator light on the instrument cluster should then turn off. Note: After completing this procedure, if you need to disconnect the battery cable, you must lock the vehicle and wait at least 5 minutes. Otherwise, the reset will not be recorded by the control unit.
4
5
Share

What causes the jerking sensation when driving a Honda XRV at low speeds?

During vehicle operation, the jerking sensation experienced when releasing the throttle is largely related to driving technique. Additional relevant information is as follows: 1. Throttle: The jerking sensation when releasing the throttle mostly occurs in lower gears, primarily due to excessively high shift RPM targets. For instance, if the engine speed exceeds 2000 RPM without shifting, releasing the throttle causes the engine's fuel supply to drop to idle levels, resulting in a rapid decrease in engine speed that restricts the transmission's output speed, leading to the jerking sensation. In higher gears such as 5th or 6th, due to the smaller gear ratio differences, the counteracting effect is milder, making the jerking sensation less noticeable when releasing the throttle. 2. Note: It is recommended not to release the throttle too quickly. By easing off the throttle more gradually, significant jerking can be avoided. Similarly, when accelerating, applying slightly lighter pressure on the throttle and increasing speed more smoothly can also eliminate the jerking sensation.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.