What does Camry 240v mean

What is the date for tire code 4621?

Tire code 4621 indicates the production date of the tire. The first two digits represent the week number, and the last two digits represent the year, meaning it was produced in the 46th week of 2021. Every tire has a production date. If a consumer encounters a new tire without a production date when purchasing, it is likely that the seller has ground off the numbers to conceal the production date. Tires without production dates are not recommended for purchase. Always check the production date when buying tires. How to check the production date of a tire: On the sidewall of the tire, immediately following the DOT letters, there is an 11-digit alphanumeric code representing the tire's identification or serial number. The last four digits of this serial number indicate the production date. On the outer side of the tire, there is a four-digit number in an oval shape, such as 5106. The first two digits represent the month of production, and the last two digits represent the year. On the outer side of the tire, there is a set of numbers. The last four digits of this marking provide information about the production date. It consists of four digits in the format AABB, where the first two digits (AA) indicate the week of the year, and the last two digits (BB) indicate the year.

12

3

Share

What Are the Reasons for Abnormal Noises When Braking Too Hard?

There are several reasons for abnormal noises when braking too hard, including the brake being in the break-in period, normal activation of the ABS system, metal hard spots on the brake pads, and severe wear of the brake disc. Brake in the break-in period: New cars or recently replaced brake discs and pads will have a break-in period, during which some abnormal noises are unavoidable. The noise will disappear after using the brakes a few times. Normal activation of the ABS system: During emergency braking, the brake pedal may produce continuous abnormal noises, sometimes accompanied by a kicking sensation, indicating that the ABS system is activated, which is a normal sound. Metal hard spots on the brake pads: There may be some tiny metal particles inside the brake pads, which can produce sharp, piercing sounds when lightly braking. Solutions include forcefully applying the brakes several times, removing and re-grinding the brake pads, or replacing them with higher-quality ones. Severe wear of the brake disc: Severe wear on the brake disc can form deep grooves around its circumference, causing friction between the brake pads and the edges of the grooves, resulting in abnormal noises. The solution is to promptly inspect the brake disc and replace it if the wear is severe.

13

5

Share

Which month does the 46th week of tire production correspond to?

Tire production in the 46th week corresponds to November. Since a month consists of 4 weeks, dividing 46 by 4 gives approximately 11.5, which means mid-November. The production date of a tire is marked on the outer side of the tire. You don't need to flip the tire; it's visible on the outer side. On one side of the tire wall, there is a set of numbers. The last four digits of this marking provide information about the production date. It consists of four digits "aabb," where the first two digits "aa" indicate the week of the year, and the last two digits "bb" indicate the year. In addition to the production date, tires also display many other pieces of information. According to international standards, the tire code consists of six parts, including tire width, tire section height and aspect ratio percentage, tire type code, rim diameter (in inches), load index (permissible load capacity code), and permissible speed code. There are two methods for identifying the specifications of car tires. One is tires marked with specifications like "5.60-13," indicating a tire width of 5.60 inches and a rim diameter of 13 inches. The other is tires marked with specifications like "195/60R14," indicating a tire width of 195mm, an aspect ratio (the ratio of the tire's radial section height to width) of 60, and a rim diameter of 14 inches. The letter "R" stands for radial tire. Additionally, radial tires may also be denoted by the letter "Z."

9

3

Share

What Should Drivers Pay Attention to When Driving in the Rain?

When driving in the rain, drivers should maintain good visibility, prevent tire skidding, drive slowly, learn techniques for driving through water, and pay attention to pedestrians. Maintaining good visibility: Besides driving cautiously, drivers should promptly turn on the windshield wipers and use lights, air conditioning defogging, and other functions appropriately. Lights not only provide illumination but also signal the vehicle's position to others. Visibility is low in rainy conditions, so turning on lights in time can significantly reduce the likelihood of accidents. However, avoid using high beams during heavy rain as the reflection can impair the driver's vision. Preventing tire skidding: Rain makes the road surface slippery, increasing the risk of tire skidding. Therefore, avoid sudden braking when turning. It's best to slow down in a straight line before entering a curve. Driving slowly: Regardless of road width or condition, drivers should reduce speed in the rain, constantly monitor the distance between their vehicle and others, and be mentally prepared to take emergency measures. Low visibility and poor road conditions in the rain also reduce the effectiveness of braking and other emergency responses, so slowing down in advance allows sufficient time and space to handle situations safely. Learning techniques for driving through water: Exercise caution when driving on roads with standing water. Maintain a low speed and drive straight without stopping unnecessarily. If the water level exceeds the exhaust pipe, find an alternative route. Observing pedestrians: Pedestrians holding umbrellas and cyclists wearing raincoats have limited visibility, hearing, and reaction time. Drivers should slow down, yield patiently, and stop at a safe spot if necessary. Avoid rushing or competing with pedestrians and cyclists.

11

0

Share

How Long Does It Take for a Car to Be Scrapped?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat cars and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-commercial passenger vehicles, large non-commercial cars, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public bus passenger vehicles have a scrapping period of 13 years, other small and micro commercial passenger vehicles have a scrapping period of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping period of 15 years. Micro commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal must fill out the "Application Form for Vehicle Change, Transfer, Modification, Suspension, or Scrapping" and stamp the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, the vehicle inspection office will determine whether they meet the scrapping standards and issue a "Vehicle Scrapping Notice" if they do. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Change Form", "XX Province Updated Vehicle Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection office for verification and signature. The license plates will be reclaimed, and the scrapping registration will be processed according to regulations. Special notes: According to Article 30 of the "Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the registration location, the owner can sell the scrapped vehicle to a local vehicle recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must be scrapped according to the original commercial vehicle's scrapping period. According to Article 43 of the "Vehicle Registration Regulations", after completing the vehicle transfer or cancellation registration, the original owner can apply to the vehicle management office to use the original license plate number when registering a new vehicle. The application must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation registration; (2) The owner must have owned the original vehicle for more than three years.

13

5

Share

How many seconds does the Kawasaki Z900 take to reach 100 km/h?

Kawasaki Z900's 0-100 km/h acceleration time is 3.4 seconds, which is a high-performance large-displacement motorcycle. Here is some relevant information about the Kawasaki Z900: 1. Engine power: The Kawasaki Z900 is equipped with a 948cc inline-four engine, with a maximum power output of 118 horsepower and a maximum torque of 95 Nm. 2. Chassis height: Kawasaki has adjusted the chassis, increasing the seat height from the previous 795 mm to 820 mm. The steel double-tube suspension frame has also been reinforced, and the suspension has been improved to accommodate the chassis.

11

1

Share

What does Camry 240v mean

What is the date for tire code 4621?

What Are the Reasons for Abnormal Noises When Braking Too Hard?

Which month does the 46th week of tire production correspond to?

What Should Drivers Pay Attention to When Driving in the Rain?

How Long Does It Take for a Car to Be Scrapped?

How many seconds does the Kawasaki Z900 take to reach 100 km/h?

What is the function of the clutch master cylinder?

How Long Does It Take to Get a Driver's License After Passing the Test?

What is the reason for the engine cutting out while driving and then resuming after pressing the accelerator again?

What engine is used in the JAC Jiayue A5?