What does Cadillac 28T mean?

2 Answers
DelDiana
07/25/25 2:49pm
Cadillac 28T refers to the fact that this Cadillac is equipped with a 2.0 turbocharged engine. The badge on the rear of the car reads 28T, with a maximum horsepower of 237 HP, a maximum torque of 350 Nm, a maximum power of 174 kW, a maximum power speed of 5000 rpm, and a maximum torque speed ranging from 1400 to 4000 rpm. It is paired with a 9-speed automatic transmission. In Cadillac 28T, the number 2 indicates that the engine displacement is greater than or equal to 2 liters but less than 3 liters. The second digit represents the power level, denoted by Arabic numerals 0-9, such as the 8 in 28T—the higher the number, the greater the engine power. The single letter denotes the engine type, with the uppercase T indicating a high-performance turbocharged engine. The Cadillac 28T has body dimensions of 4730 mm in length, 1824 mm in width, and 1421 mm in height, with a wheelbase of 2680 mm and a curb weight of 1600 kg. Cadillac is an automobile manufacturer under the General Motors Group in the United States, founded in 1902.
Was this review help?
15
5
Share
Owen
08/11/25 9:14pm
The '28T' badge on Cadillac actually refers to the type of engine used in the vehicle, which is a 2.0-liter turbocharged engine. For example, it's commonly seen on models like the Cadillac ATS or XTS. The '28T' stands for turbocharged, meaning it's equipped with a turbocharger that allows the engine to intake more air, thereby enhancing power output. While regular engines might only have natural aspiration, the 28T engine can deliver stronger horsepower, such as over 200 horsepower, providing noticeable acceleration and a strong push-back feeling when you step on the gas, making highway overtaking much easier. Moreover, this design is more fuel-efficient compared to larger-displacement V6 engines, with an average fuel consumption of around 9 liters in city driving, making it economical for daily commutes. Maintenance is also relatively straightforward—while the turbocharged components require timely servicing, overall reliability is quite high among luxury vehicles. If you see the 28T badge on a used car, it means it’s equipped with this high-performance yet fuel-efficient configuration, a signature feature of Cadillac that enhances driving enjoyment.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What Causes No Sound in Wuling Hongguang Audio System?

No sound in the Wuling Hongguang audio system may be caused by wiring issues. Solutions for no sound in Wuling Hongguang audio system: It is recommended to open the settings, find the reverb option, and then adjust the volume control. If other settings need to be changed, hold the mode button for three seconds to set the time. If there is still no sound, you can also disconnect the battery cable, wait for one minute, and then reconnect it. Detailed method for debugging the Wuling Hongguang audio system: The Hongguang S dashboard has two round buttons. The one closer to the driver's seat can be pressed to turn on the system when the vehicle is started or powered on. The round button near the driver's seat serves as both the power switch and volume control.
14
4
Share

Why is the steering wheel of Besturn B50 heavy?

Besturn B50 steering wheel heavy may be caused by the belt breakage of the steering repair pump. Disassembly of the buttons on the Besturn B50 steering wheel: First, make sure the car is parked straight with the steering wheel aligned. Pry open the plastic cover on the steering wheel, disconnect the two horn wires, use a 17mm socket, extension bar, and breaker bar to remove the center screw. Hold the steering wheel firmly with your right hand and remove the screw with your left hand. Then, shake the steering wheel up and down until it comes off, and then remove the surrounding screws. Interpretation of the Besturn B50 steering wheel buttons: Audio system, air conditioning system, rear window defrost system, power windows.
13
4
Share

What is the torque for Volkswagen wheel bolts?

Volkswagen wheel bolts generally require a torque of 90-110 N·m. Tools for removing Volkswagen wheel bolts: Multiple factors need to be considered, including material, surface treatment, standard, characteristics, wrench shape, wrench head type, and variety. For example, materials may include tool steel, high-carbon steel, chrome-vanadium alloy steel, 45# steel, chrome-vanadium steel, etc. Types may include torque wrenches, ratchet wrenches, etc. Torque for wheel bolts: The required torque varies depending on the vehicle model. Please refer to the manual for specific values. Volkswagen wheel bolts are typically M14, with a design torque of 78.5-117 N·m, inspection torque of 85-140 N·m, and the wrench should be set at 96 N·m.
15
1
Share

What is the reason for the repeated jumping of the Wuling Hongguang S1 door lock?

The reason for the repeated jumping of the Wuling Hongguang S1 door lock is either a malfunction in the vehicle's central locking system or the vehicle's door not being properly closed. Central locking system malfunction: There are many types of central locking systems in modern cars, but the basic components mainly include the door lock switch, door lock actuator, and door lock controller. A malfunction in the central locking system causing the door lock to fail is usually due to issues with the door lock actuator or door lock controller. If this occurs, it is recommended to have a technician inspect and repair it at a service point, as diagnostic tools can quickly detect the fault information. Vehicle door not properly closed: Since the central locking system is also compromised, using a mechanical key can only lock one door. Locking multiple doors simultaneously with a mechanical key requires the central locking system.
19
2
Share

Where to Find the Engine Number?

The engine number is usually found on the outer surface of the engine block, or on the vehicle's nameplate, the nameplate inside the engine compartment. You can also check the engine number on the car purchase invoice; the factory certificate has the engine number; for commercial vehicles, the operating license can be used to query the engine number; the vehicle purchase tax payment certificate contains the engine number; the registration record with the public security authorities has the engine number; the vehicle insurance card includes the engine number; it is also located below the windshield directly in front of the driver's position. The simplest and most direct method is to check the vehicle's green book or the car's registration certificate. The engine number is like a person's ID number, representing each vehicle. It stores very important information about the vehicle. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine, for a batch of identical products. It is used to indicate information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power, etc. Engines installed in cars or multi-purpose passenger vehicles are marked with the professional manufacturer's name, model, and production number as required. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer's range, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only have one engine number, and each engine's number is unique. Composition of the vehicle engine number: Front part: Includes the product series code, generation symbol, and regional or corporate code, which are selected by the manufacturer as needed with corresponding letters, but must be approved and recorded by the industry standard's centralized unit. Middle part: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear part: Composed of symbols for structural features and usage characteristics. Tail part: Distinguishing symbol. When differentiation is needed within the same product series due to improvements or other reasons, the manufacturer selects appropriate symbols to indicate this, and the rear and tail parts can be separated by a hyphen.
10
2
Share

Why does the Wuling Hongguang S have only one reverse light?

Because the Wuling Hongguang S is equipped with only one reverse light, as is the case with many other vehicle models. On the other side, it corresponds to the rear fog light, which also reduces the failure rate. The reverse light is installed at the rear of the car to illuminate the road behind and warn vehicles and pedestrians behind that the car is reversing. All reverse lights are white. Since 2001, China's National Traffic Law has revised regulations, requiring each vehicle to be equipped with at least one fog light and one reverse light. Vehicles less than 6 meters in length are mandated to have one reverse light, with the other being optional. Due to this national regulation, many automakers, in compliance with the law, install only one reverse light. This not only adheres to national legal requirements but also saves manufacturing costs. The national law's reduction of one reverse light has a scientific basis. Since reverse lights are white and highly bright to illuminate the rear, having two symmetrical reverse lights could make it difficult for drivers to see the road ahead clearly. On dark roads at night, this could mistakenly lead drivers to think the car in front is moving in the opposite direction. A single reverse light is more easily identifiable. When the tail light on the other side lights up, it creates a combination of red and white lights, naturally eliminating such misunderstandings. This also benefits color-blind individuals and better captures drivers' attention, helping to avoid traffic accidents.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.