···
Log in / Register

What does Buick Excelle code128 mean?

5 Answers
DiJosie
07/29/25 5:31pm

Excelle code128: It means the engine hood is not closed tightly. Simply close the hood properly. If it cannot be closed, possible causes include the hood release cable not retracting, deformation of the hood lock, loose lock mechanism screws causing the lock to lower, lock mechanism displacement, or broken latch, etc. It is recommended to visit a 4S store for inspection and repair as soon as possible. Below are relevant details about the Excelle: 1. Exterior: The new Excelle follows Buick's "dynamic and fluid" design language, drawing inspiration from the classic elements of the Riviera concept car. It features a new winged chrome grille, winged LED automatic sensing headlights, winged LED taillights, dual peak character lines on the body, large-view exterior rearview mirrors, and 16-inch dual five-spoke luxury two-tone aluminum alloy wheels. 2. Interior: The new Excelle's cabin continues Buick's 360-degree wraparound integrated design, complemented by high-touch interior materials and Quiet-Tuning, Buick's patented noise reduction technology. It comes with a three-spoke multifunction steering wheel, ice-blue sporty instrument panel, fully automatic air conditioning system, one-touch start function, rear air conditioning vents, and a flexible 400L luggage compartment.

Was this review help?
17
5
Share
ArielLee
08/14/25 8:35am

As a Buick Excelle owner, after driving for so many years, the moment code 128 pops up, I know it's the cooling system sounding the alarm, indicating the temperature just won't rise—classic thermostat stuck open. It could be a coolant leak or a faulty sensor. If your engine light comes on while driving and the temperature gauge shows low, pull over immediately to check. Don't push it, or you might end up with a frozen engine. I remember last winter, my car showed this same code. A quick trip to the shop for a new thermostat fixed it—didn't cost much but saved a ton of hassle. Keep an eye on coolant levels and aging, and stick to regular maintenance to prevent this pesky issue.

Was this review help?
6
2
Share
Expand All
EmmaDella
10/13/25 7:24am

As someone who frequently works with cars, a code 128 on a Buick Excelle is nothing unusual—it's just a trouble code indicating the coolant temperature hasn't reached the required level. Most of the time, the thermostat fails to close when it should, staying open and making cold starts difficult for the engine, especially noticeable in winter. The causes can vary, such as loose sensor wiring or accumulated coolant contamination. It's best to immediately use a diagnostic tool to check and confirm the code. I've seen several cases in the garage where owners ignored it, leading to a sharp increase in fuel consumption and making repairs time-consuming and labor-intensive. My advice is to start with the simple fixes first, like trying to top up the coolant yourself. If that doesn't work, head to a professional shop—don't delay for safety's sake.

Was this review help?
17
1
Share
Expand All
Ann
11/26/25 8:22am

My Buick Excelle previously showed code 128, and after checking, I found out it was an engine temperature issue, indicating a problem with the coolant system, possibly due to a failed thermostat or a circuit leak. The first time I encountered this, I panicked and flipped through the manual, only to realize that parts had to be replaced immediately—it couldn't wait. Other potential causes include electrical circuit failures, which require diagnostic tools to identify. It's best to take it to a 4S shop for repairs right away. Also, regularly check if the coolant reservoir is clean to prevent issues before they arise.

Was this review help?
5
0
Share
Expand All
VanSienna
11/26/25 8:24am

I've been into cars for years, and the code 128 in the Buick Excelle actually indicates a cooling temperature control alarm, meaning the temperature is consistently below normal values. The main causes are thermostat wear or sensor failure. When this code appears, the car experiences weak acceleration and slow cold starts. I've tried DIY diagnostics: checking if the coolant color is cloudy and looking for leaks in the pipes. Simple DIY fixes include changing the coolant or resetting the system, but if the issue frequently reappears, it's safer to consult a professional to prevent minor problems from escalating. Regular radiator cleaning can also help avoid this issue.

Was this review help?
17
4
Share
Expand All
More Forum Discussions

When was the Jetta VS5 released?

The Volkswagen Jetta VS5 was officially launched on September 5, 2019. The 2022 Jetta VS5 offers a total of five models, including two manual and three automatic transmissions. The vehicle's exterior design does not incorporate many trendy elements, featuring a front grille with a dot-matrix pattern, the new Jetta logo in the center, and matching LED headlights on both sides with daytime running lights below, giving it an overall stable appearance. The Jetta VS5 is positioned as a compact SUV, with body dimensions of 4419mm in length, 1841mm in width, and 1616mm in height, and a wheelbase of 2630mm. In terms of power, the Jetta VS5 is equipped with a Volkswagen EA211 series engine, a 1.4T 4-cylinder with a maximum horsepower of 150, a maximum power of 110 kW, and a maximum torque of 250 Nm. The vehicle adopts a dual five-spoke wheel design, with front and rear tire specifications of 225/50R18. The manual transmission is a 5-speed manual gearbox, while the automatic transmission is paired with a 6AT gearbox. The official 0-100 km/h acceleration time is 9 seconds (manual version), and in actual tests, it can also achieve under 10 seconds. The combined fuel consumption is 6.2 liters per 100 km, but in real-world urban driving conditions with relatively good traffic, the fuel consumption is around 7.5 liters per 100 km.
5
3
Share

Where is the tire pressure monitoring set button located on the Highlander?

The tire pressure monitoring set button on the Highlander is located on the center console. Below are the functions and working principles of the tire pressure monitoring system: Functions of the tire pressure monitoring system: The tire pressure monitoring system is a type of active safety equipment. It can promptly alert the driver when there are signs of danger in the tires, prompting them to take appropriate measures, thereby preventing serious accidents. With the tire pressure monitoring system, tires can always be kept within the specified pressure and temperature range, reducing tire damage and extending their service life. Working principles of the tire pressure monitoring system: When the air pressure in a tire decreases, the rolling radius of that tire becomes smaller, causing it to rotate faster than the other wheels. By comparing the differences in rotation speed between tires, the system monitors tire pressure.
11
0
Share

How to Apply for Temporary License Plates?

When purchasing a car at a 4S dealership, you can entrust the dealership staff to handle the application for temporary license plates, or you can personally visit the vehicle management office window to apply. Here is more information about temporary license plates: Introduction: Temporary license plates are paper motor vehicle license plates that permit temporary road use of a vehicle, also known as temporary driving license plates. They are temporary vehicle operating certificates issued by the public security vehicle management department for newly purchased vehicles before official registration. Validity Period: The validity period of temporary license plates generally does not exceed thirty days. Classification: There are four types: temporary license plates for administrative districts, temporary license plates for cross-administrative districts, temporary license plates for testing purposes, and temporary license plates for special-type motor vehicles.
3
2
Share

What does a/s mean in a car?

The a/s in a car is a function of the car radio, which means automatic search for radio frequency and automatic storage of radio frequency. The following is an introduction to the names of car radio buttons: POWER/VOL (left rotary knob): Press to turn on/off, rotate to adjust volume. TPK/MANU (right rotary knob): MP3 track selection and browsing. AST: Long press this button to automatically store radio stations. RPT: Repeat play in CD/USB mode. INT: Browse and play in CD/USB mode. 6. RDM: Random play in CD/USB mode.
13
3
Share

Difference Between DSG Transmission and DCT

The difference between DSG transmission and DCT is that DCT refers to all dual-clutch transmissions, while DSG is a type of dual-clutch transmission. DSG transmission belongs to the DCT transmission category. Below is more information about transmission replacement: Introduction: Transmission fluid is used in automotive gearboxes to clean and lubricate the shifting system, prolong the lifespan of transmission components, and serves functions such as cleaning, lubrication, rust prevention, and heat dissipation. Types: Transmission fluid can be categorized into manual transmission fluid and automatic transmission fluid, depending on the type of vehicle transmission. Replacement Interval: Generally, it should be replaced every 3 years or approximately 100,000 kilometers.
2
4
Share

What is the reason for the high fuel consumption of the ninth-generation Accord?

The high fuel consumption of the ninth-generation Accord is caused by excessive carbon deposits in the engine or the spark plugs not being replaced for a long time. The specific reasons are as follows: Spark plugs not replaced: Some vehicles have been driven for hundreds of thousands of kilometers without replacing the spark plugs. Although they can still be used, the insufficient ignition energy will affect the ignition timing, causing it to miss the optimal ignition time, which will result in partial power loss. At the same time, it will also lead to incomplete combustion, further increasing fuel consumption. Therefore, the spark plugs need to be replaced. Excessive carbon deposits in the vehicle: Carbon deposits can accumulate in the throttle valve, fuel injector, intake manifold, and piston top. Excessive carbon deposits in any of these areas will affect the combustion process, leading to incomplete combustion and increased fuel consumption. Therefore, it is necessary to clean the carbon deposits in the vehicle.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.