What Does Braking Deceleration Mean?

1 Answers
LaGia
07/24/25 6:28pm
Braking deceleration refers to what is commonly known as pressing the brake. Below are related explanations: 1. What is a Brake Pedal: As the name suggests, the brake pedal is the pedal that limits power, i.e., the pedal for the foot brake (service brake), used for deceleration and stopping. It is one of the five major controls in car driving and is used very frequently. How the driver controls it directly affects driving safety. 2. Brake Pedal: The brake pedal is colloquially known as stepping on the brake. There is a small pedal on the brake connected to the brake lever, hence this pedal is also called the "brake pedal." There is also a small pedal on the clutch, known as the clutch pedal. The clutch is on the left, and the brake is on the right.
Was this review help?
20
1
Share
More Forum Discussions

Can the Wuling Hongguang mini be charged at a charging station?

The Wuling Hongguang mini can be charged at a charging station. A home 220V charging station is sufficient to charge the Wuling Hongguang mini. The Hongguang MINIEV can directly use a standard household grounded 220V three-pin power source for charging. Precautions when using a charging station: Do not charge in areas with standing water: to avoid battery damage caused by water immersion.
17
0
Share

Where is the tire pressure reset button for the new Infiniti QX50?

Tire pressure reset method: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no stamp on top and four small spikes at the bottom, containing an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged due to impact while driving, it will also cause the tire pressure warning light to illuminate. For sensor damage issues, only replacement with a new part is possible.
12
1
Share

At What Temperature Should Winter Tires Be Changed?

Winter tires should be changed when the average temperature drops below 7 degrees Celsius. Principle of Winter Tires: Winter tires use a special compound to increase friction on snow and ice-covered roads, improving traction and safety. In low temperatures, the surface of winter tires becomes softer, providing better grip. Regular tires, on the other hand, become harder as temperatures drop. Differences Between Winter Tires and Regular Tires: Winter tires feature an asymmetric directional tread pattern with more grooves and a softer material. The higher the proportion of grooves on the tire surface, the better the water drainage. Winter tires typically have at least 1,000 fine grooves, compared to around 200 in regular tires. In terms of material, winter tires are softer than regular tires, primarily due to special tread compounds that generate greater friction. This significantly enhances vehicle control and safety on slippery ice surfaces.
6
1
Share

Can You Drive on the Highway During a Yellow Fog Warning?

A yellow fog warning allows driving on the highway. A yellow warning indicates fog with visibility less than 500 meters. The yellow fog warning signal is issued by meteorological departments through weather monitoring before the arrival of dense fog, alerting the public to prepare for the impact of fog and urging traffic authorities to minimize accidents caused by fog. The yellow fog warning is the first level in the fog warning system. Precautions for Driving in Foggy Conditions: When driving in fog, promptly turn on your fog lights, position lights, or low beams. If driving on a highway or in very thick fog, also activate your hazard warning lights and maintain a low speed. If visibility drops below 50 meters due to dense fog, do not exceed 20 km/h and exit the highway at the nearest available exit. Avoid Blindly Overtaking: If you notice a vehicle stopped on the right side ahead, do not overtake blindly, as it may be waiting for oncoming traffic to pass. When passing a parked vehicle, ensure it has no intention of moving and there is no oncoming traffic before sounding your horn and cautiously passing from the left at a low speed.
10
2
Share

What Causes Headlights to Flicker?

Headlights flickering may be caused by abnormal charging voltage from the alternator, issues with the headlight wiring, or problems with the headlight switch. Abnormal charging voltage from the alternator: The alternator is driven by the engine. At idle speed, the engine's torque is low, and the headlights require high power, making it difficult to maintain normal operation. Solution: Have it inspected and repaired at a 4S shop. Issues with the headlight wiring or switch: If the issue doesn't occur when the headlights are off, it's likely due to poor contact in the wiring or switch. Overheating wires can increase resistance, reducing the brightness of the headlights. Solution: Have it inspected and repaired at a 4S shop.
14
4
Share

How often should wheel alignment be performed on a car?

It is recommended to perform a wheel alignment every 10,000 to 20,000 kilometers. However, if you frequently drive long distances or on mountainous roads, you may need to reduce the interval to between 8,000 and 15,000 kilometers. Additionally, it is advisable to perform a wheel alignment if any of the following situations occur: 1. The steering wheel pulls to one side when driving straight. 2. The steering wheel vibrates abnormally during normal driving. 3. The vehicle's tires show abnormal wear after some time of driving. 4. After replacing tires or adjusting the suspension system. 5. After the vehicle has been involved in a collision or accident.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.