What does 'brake pads should not be repaired' mean?

2 Answers
FinnMarie
07/29/25 7:38pm
Brake pads should not be repaired means the brake pads are no longer usable and need to be replaced. Introduction to brake pads: Brake pads are the friction components on vehicles specifically used for braking, also known as brake linings in some regions. There is no fixed replacement interval for brake pads, and regular inspections are recommended. Brake pad replacement timing: For general household vehicles, inspections should be conducted at around 30,000-60,000 kilometers to determine replacement based on wear level. As each person's driving habits vary and each vehicle's braking system differs, replacement time should be determined according to the degree of wear. Signs indicating brake pad replacement: When brake pads are severely worn, just before they are completely worn out, the wear indicator on the brake pad will rub against the brake disc when braking, producing a sharp, screeching sound. Some vehicle models have a dedicated warning light for brake pad wear. When the brake pad wear warning light on the dashboard illuminates, it indicates that the brake pads need to be inspected and replaced.
Was this review help?
4
4
Share
MacKyle
08/14/25 2:52pm
As a veteran driver with twenty years of experience, I believe the phrase 'brake pads shouldn’t be repaired' means the brake pads are too severely worn to fix and must be replaced. The material of brake pads is like a layer of leather; once it wears thin, it can’t adhere firmly to the brake disc, making repairs ineffective and increasing the risk of slipping during braking. I’ve encountered situations where people try to save money by repairing when the car shakes or makes noise, but in reality, buying a new set of pads is cheaper and more reliable. The braking system is a matter of life and death—don’t take risks. Regularly check the wear indicators and replace them immediately if an alert appears. This advice reminds us that safe driving is more important than anything else; never risk major safety for minor savings.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

What engine does Oshan Auto use?

Oshan Auto's engines are independently produced by Changan Company, with the production site located in Chongqing, making them domestically manufactured engines. In the Oshan Auto series, the Oshan X7 is equipped with the JL476ZQCF engine model, delivering a maximum power of 131kW, maximum horsepower of 178, and maximum torque of 265Nm. The 1.5T version of the Oshan X5 features the Blue Whale NE1.5T engine, with a maximum power of 132KW, maximum torque of 300Nm, and maximum horsepower of 180. For the daily maintenance of Oshan Auto engines, the following methods can be applied: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To prevent faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
6
2
Share

What does the maintenance light on the new Volvo S90 mean?

Volvo's new S90 maintenance light is on to remind the owner that maintenance is required. The following is a detailed introduction to the Volvo S90: 1. Model positioning: As a minor facelift for the year, the Volvo S90 has added two new sport versions. 2. Configuration: Significant improvements have been made to mid-to-high-end models. Taking the Zhiyuan version as an example, compared to the current model, it adds practical configurations such as a leather-wrapped dashboard, electric adjustment of the front seat cushion length, an enhanced air purification system, electric side window sunshades, a rear windshield sunshade, and an automatic parking system. 3. Powertrain: It continues to use the low/high-power Drive-E series 2.0T turbocharged engine, where T4 corresponds to low power, outputting 139kW (190PS), and T5 corresponds to high power, outputting 186kW (254PS), paired with an Aisin 8-speed automatic transmission.
14
0
Share

What is the passing score for the driving license subject four exam?

Driving license subject four exam requires a score of 90 to pass. Here is some information about the driving license subject four exam: 1. Questions: The subject four exam paper consists of 50 questions, presented in the form of cases, pictures, animations, etc., with a full score of 100 and a passing score of 90. Similar to subject one, a score of 90 or above is required to pass subject four. 2. Exam content: Depending on the type of driving license being tested, 50 questions are randomly selected from the corresponding subject four question bank in proportion. For small vehicle licenses, questions are selected from a pool of 800, while for large vehicle licenses, questions are selected from a pool of 1023, with each question worth 2 points.
20
2
Share

Why doesn't the dash cam have loop recording function?

Check whether the recording lock function is enabled to solve the problem. The following is a detailed introduction to dash cams: 1. Loop recording duration of dash cams: The loop recording settings generally offer different time options such as 1 minute, 2 minutes, 3 minutes, 5 minutes, and 10 minutes. After recording one segment, it automatically moves to the next. 2. Optimal recording time setting for dash cams: Avoid setting the duration too short or too long. If the recording time is too short, the video will be divided into more segments, increasing the chance of frame loss. Conversely, if the duration is too long, fewer videos will be stored and they will be overwritten quickly. It is recommended to set the recording time to 3 or 5 minutes for optimal performance.
2
2
Share

Does a car that hasn't had carbon deposits cleaned for over 100,000 kilometers need cleaning?

A car that hasn't had carbon deposits cleaned for over 100,000 kilometers does need carbon deposit cleaning. The introduction and methods for carbon deposit cleaning are as follows: Introduction to Carbon Deposit Cleaning: It should be decided based on the vehicle's usage. Generally, it is recommended to perform the cleaning every 50,000 kilometers. However, from an economic perspective, if the car is frequently used for long-distance travel, cleaning may not be necessary, and even cleaning once every 100,000 kilometers is acceptable. If the car is often driven in urban areas, it is recommended to clean every 50,000 kilometers. Methods for Cleaning Carbon Deposits: 1. Hydrogen-oxygen decarbonization machine uses atomization to clean both the air intake and the gasoline engine cylinders simultaneously. 2. Drip cleaning or soaking: After removing the spark plugs from each cylinder, pour the cleaning solution into the cylinders and soak until most of the carbon deposits have melted, then extract them using professional tools. 3. Fuel additives are relatively economical and effective, though they cannot completely remove all carbon deposits and may contain corrosive chemicals. 4. If the car has severe carbon deposits, it is recommended to manually disassemble and clean the engine's intake and cylinder head.
11
2
Share

How to Determine if Drum Brakes Need Replacement?

When you feel the brake pedal is too light or braking requires extra effort, it indicates that the brake pads are worn thin and the drum brakes need to be inspected and replaced promptly. Here are specific details about drum brakes: 1. Application of Drum Brakes: Due to their reliability and strong braking force, drum brakes are still equipped on many vehicle models today. They are fixed to the tires and rotate at the same speed. During braking, hydraulic pressure is used to push the brake shoes against the inner edge of the brake drum, generating friction to slow down the rotation of the tires and achieve the braking effect. 2. Principle of Drum Brakes: Drum brakes work by using stationary brake shoes inside the brake drum to rub against the rotating brake drum, creating friction that reduces the speed of the wheel rotation.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.