What does BMW M mean?

What engine does the BMW M140i use?

The BMW M140i is equipped with a 3.0-liter inline 6-cylinder turbocharged engine, with the following details: 1. The 3.0 refers to the engine displacement of 3.0 liters, and 'inline' indicates the cylinder arrangement. 2. The 6-cylinder designation means the engine has a total of six cylinders, and 'turbocharged' denotes the type of engine. Below is additional information about the BMW M140i: 1. The BMW M140i model maintains a design consistency with the M135i in terms of exterior and interior styling, featuring M performance kits and more sporty alloy wheels. The interior boasts an all-black finish with silver accents, exuding a strong mechanical feel. 2. In terms of performance, the BMW M140i is powered by a 3.0T turbocharged engine, delivering a maximum power output of 250 kW and a peak torque of 500 Nm. It is paired with either a 6-speed manual or an 8-speed automatic transmission.

15

3

Share

What are the differences between the Mercedes-Benz A35 and A45?

The differences between the Mercedes-Benz A35 and A45 are: 1. Different body dimensions: The length, width, and height of the Mercedes-Benz A35 are 4637mm, 1796mm, and 1422mm respectively; the length, width, and height of the Mercedes-Benz A45 are 4367mm, 1780mm, and 1417mm respectively. 2. Different engines: The maximum power of the Mercedes-Benz A35's engine is 225kW; the maximum power of the Mercedes-Benz A45's engine is 285kW. The maximum power speed of the Mercedes-Benz A35's engine is 5800 revolutions per minute, and the maximum torque speed is 3000 to 4000 revolutions per minute. This engine is equipped with direct fuel injection technology, uses an aluminum alloy cylinder head and block, and is paired with a 7-speed dual-clutch transmission. The maximum power speed of the Mercedes-Benz A45's engine is 6500 revolutions per minute, and the maximum torque speed is 4750 to 5000 revolutions per minute. This engine is equipped with hybrid injection technology, uses an aluminum alloy cylinder head and block, and is paired with an 8-speed dual-clutch transmission.

15

4

Share

How many items are there in B2 Subject 3?

There are 16 items in the B2 driver's license Subject 3 test. The road test items for B2 license Subject 3 include: vehicle preparation, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. According to the appendix of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": A B2 driver's license allows driving heavy and medium-duty trucks; heavy and medium-duty special-purpose vehicles. Other permitted vehicle types include: C1, C2, C3, C4, M. B2 Subject 3 precautions: Starting: Close the door, fasten the seat belt, turn on the left signal, shift to 2nd gear, honk three times, observe the left rearview mirror, slowly release the clutch while accelerating and release the parking brake to start, no rolling back; Going straight through intersections: Speed should not exceed 30 or be below 20, no crossing the yellow line; Bus stops: Speed should not exceed 30 or be below 20, no crossing the yellow line; Turning right at intersections: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or be below 20, no crossing the line; Changing lanes: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or be below 20, no crossing the boundary line; Overtaking: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or be below 20, no crossing the boundary line; Turning left at intersections: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or be below 20, no crossing the line; Passing school zones: Speed should not exceed 30 or be below 20, no crossing the line, no honking; Driving straight: Shift to 5th gear and accelerate when speed exceeds 40, speed should be above 40, no crossing the line; Accelerating: Shift to 5th gear and accelerate when speed exceeds 40, speed should be above 40, no crossing the line; Making U-turns: Choose a suitable section, turn on the right signal, move to the far right lane and stop, turn on the left signal, shift to 2nd gear, make a two-forward-one-reverse U-turn, no rolling back; Pulling over: Turn on the right signal for 3 seconds before pulling over, the right wheel should not be more than 30 cm from the roadside, apply the parking brake, shift to neutral. B2 Subject 3 scoring criteria: The following situations will result in immediate failure: Not using the seat belt as required; Blocking or turning off the in-vehicle audio and video monitoring equipment; Not following the examiner's instructions; Rolling back more than 30 cm when starting; Using a gear that does not match the speed for a long time, causing the engine to run too high or too low; Failing to shift gears twice in a row while driving; Coasting in neutral while driving; Not following traffic signals, signs, or markings; Not driving at the required speed; Driving over the solid center line or lane edge line; Driving over the lane divider for a long time (more than 15 seconds); Changing two or more lanes in succession; Parking in no-parking zones such as pedestrian crossings or grid lines; The candidate does not attend the exam at the scheduled time; The following situations will result in a 10-point deduction: Rolling back when starting, but less than 30 cm; Shifting to the wrong gear when starting or driving; Not using or incorrectly using the turn signal before starting, turning, changing lanes, overtaking, or parking; Turning the steering wheel less than 3 seconds after turning on the turn signal before starting, turning, changing lanes, overtaking, or parking; Stalling the engine once due to improper operation. Vehicle preparation: Not walking around the vehicle counterclockwise to check the vehicle's appearance and surroundings will result in failure. Starting with the following situations will result in immediate failure: Starting with insufficient brake pressure; Starting with the door not fully closed; Not shifting to neutral when starting the engine; Starting without releasing the parking brake and not correcting it in time; The following situations will result in a 10-point deduction: Starting without releasing the parking brake but correcting it in time; Not releasing the starter switch in time after the engine starts. Gear shifting operations: Not shifting gears smoothly as instructed will result in failure; Vehicle speed not matching the gear will result in a 10-point deduction. Pulling over: After parking, the vehicle body exceeding the right edge of the road or the pedestrian crossing will result in failure; Not closing the door after getting out will result in failure; After parking, the vehicle body being more than 30 cm from the right edge of the road or the sidewalk will result in a 10-point deduction; Not applying the parking brake after parking will result in a 10-point deduction; Releasing the foot brake before applying the parking brake will result in a 10-point deduction; Not turning off the engine before getting out will result in a 5-point deduction. Going straight through intersections, turning left at intersections, turning right at intersections: Not slowing down or stopping to look as required will result in failure. Passing pedestrian crossings, school zones, bus stops: Not slowing down as required will result in failure.

3

0

Share

What does BBA mean in the automotive industry?

In the automotive industry, BBA refers to the collective abbreviation of Mercedes-Benz, BMW, and Audi. BBA stands for the first letters of these three brands' English names: BMW, Benz, and Audi. The first 'B' represents BENZ (Mercedes-Benz), the second 'B' stands for BMW, and 'A' denotes AUDI. These three brands are renowned as the 'Three German Luxury Automakers' in the automotive world. Mercedes-Benz is a German automotive brand headquartered in Stuttgart, Germany, and is a member of the Daimler AG. Its product lineup includes various passenger cars and medium to large commercial vehicles. BMW, another German automotive brand, belongs to the BMW Group and offers models under the i, X, Z, and pure number series (1, 2, 3, etc.), along with the performance-oriented M series based on these models. Audi is an automotive brand under Audi AG, a subsidiary of the Volkswagen Group, and represents classic vehicle styles.

6

2

Share

Is the wear and tear severe for a used car with 70,000 kilometers?

The wear and tear of a used car cannot be judged solely based on mileage. It should be comprehensively evaluated according to the vehicle's power performance, exhaust emission performance, safety performance, operational performance, and overall appearance. Below are relevant methods to assess the wear and tear of a vehicle: 1. Body Frame: Includes the front, middle, and rear beams of the vehicle body. The main focus is to observe whether these three major components have deformation, bending, or wrinkling. If so, it indicates that the car has been involved in a collision with significant damage. 2. Body Parts: Check whether the engine hood and rear fender are misaligned or uneven; whether components in the engine compartment are misaligned; whether the connections of various safety mechanisms on the vehicle body are tight and whether the gaps between components are uniform. 3. Exterior Appearance: Check for scratches, dense small dents, and rice-sized paint chips on the car paint; whether there are color differences in the paint, which can serve as a basis for determining if the car has been repainted.

17

1

Share

Is reversing into a parking space different for SUVs compared to sedans?

Reversing into a parking space for SUVs and sedans is both similar and different. The similarity lies in the observation points being the same. The difference is that SUVs generally have a higher driver position and a larger body, so it's necessary to find suitable reference points based on the specific model. Additionally, most SUVs are equipped with parking sensors and cameras, which can provide effective references. Relevant information about SUVs is as follows: 1. Introduction: SUV stands for Sport Utility Vehicle, which is different from ORV (Off-Road Vehicle) that can be used on rough terrain; the full name of SUV is sport-utility-vehicle, or suburban-utility-vehicle, meaning a suburban utility vehicle that combines the space functionality of a station wagon with the off-road capability of a pickup truck. 2. Features: SUVs are characterized by strong power, off-road capability, spacious comfort, and excellent cargo and passenger carrying functions.

9

4

Share

What does BMW M mean?

What engine does the BMW M140i use?

What are the differences between the Mercedes-Benz A35 and A45?

How many items are there in B2 Subject 3?

What does BBA mean in the automotive industry?

Is the wear and tear severe for a used car with 70,000 kilometers?

Is reversing into a parking space different for SUVs compared to sedans?

How much electricity can the Wuling Hongguang mini charge in one hour?

The Real Reputation of Honda CRV Hybrid

What are the pros and cons of the BYD Song Plus DM-i?

How to Reset the Oil Life on a 2019 Buick Excelle?