What does BMW adaptive mean in Chinese?

How Long Should the Engine Run After a Jump Start Before Turning It Off?

After a jump start, let the engine run for about half an hour before turning it off to ensure there is enough battery charge for the next start. When jump-starting, be sure to connect positive to positive and negative to negative to avoid reversing the polarity, which could damage the battery and cause a short circuit in the car's electrical system, potentially leading to personal injury. The steps for jump-starting a car are: 1. Connect the red cable to the positive terminal of the dead battery; 2. Connect the other end of the red cable to the positive terminal of the donor car's battery; 3. Connect the black cable to the negative terminal of the donor car's battery; 4. Connect the other end of the black cable to an unpainted metal surface (ground) on the car with the dead battery. When removing the cables, remember to disconnect the negative cable first, followed by the positive cable.

13

2

Share

What are the reasons for the Audi A4L not starting and making a clicking sound?

The reasons for the Audi A4L not starting and making a clicking sound are: 1. Damaged bearings in the water pump, air conditioning compressor, clutch, generator, power steering pump, or belt tensioner pulley; 2. Faulty spark plugs or ignition coils; 3. Engine starter motor spinning freely; 4. Slipping flywheel ring gear; 5. Insufficient battery power; 6. Poor quality gasoline. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of: length 4858mm, width 1847mm, height 1439mm, wheelbase of 2908mm, fuel tank capacity of 56 liters, and trunk capacity of 424 liters.

8

5

Share

How many kilometers should a new Mercedes-Benz drive for its first maintenance?

Mercedes-Benz new cars should undergo their first maintenance after driving 3,000 kilometers. The items to be checked during the first maintenance include: 1. External inspection: Check for damage to bulbs and lamp covers, inspect the fixation of body ornaments, and examine the condition of the rearview mirror; 2. Tire inspection: Check the wear condition of the tires, clean the trunk, and inspect the tires for bulges, abnormal main wear, aging cracks, and hard damage; 3. Cleaning and waxing: Clean the interior of the car, remove debris from the surface of the radiator, oil cooler, and air conditioning radiator; 4. Chassis maintenance: Check for any oil leakage in the chassis, inspect the gear oil level of each assembly and supplement appropriately, and fully lubricate all grease fittings on the chassis.

10

4

Share

How to Turn On the Geely Vision Dash Cam?

After starting the car, the dash cam will automatically turn on. Here are specific details about the Geely Vision: 1. Some models of the new Geely Vision come equipped with a dash cam, which is an integrated rearview mirror dash cam. The built-in dash cam is convenient to use and has an aesthetically pleasing design. 2. The dash cam has a built-in battery, but the battery capacity is small. Here is some extended information about dash cams: 1. They can protect the legal rights of drivers by providing direct and effective evidence. 2. They enable traffic police to handle accidents accurately and quickly. 3. They can effectively remind drivers to drive safely, reducing the occurrence of traffic accidents.

18

3

Share

What Causes Shaking When Starting a Car?

The reasons for a car shaking when starting are: 1. The throttle valve is too dirty or the fuel injector has excessive carbon deposits, causing the gasoline sprayed by the cold start injector to be largely absorbed by the carbon deposits; 2. Uneven distribution of positive pressure between the main and driven discs, inconsistent adjustment of the separation levers or uneven separation finger ends of the diaphragm spring, leading to asynchronous pressing times and uneven force on the pressure plate, causing it to tilt; 3. Weakened damping spring force, clutch torsional damping spring force, and clutch pressure spring force, resulting in cracks in the diaphragm spring; 4. Loose engine mounting or misalignment between the transmission shaft and the engine crankshaft centerline.

11

4

Share

Why is the delivery of Ora Good Cat so slow?

Regarding the slow delivery of the Ora Good Cat, an Ora sales representative explained: Firstly, the lithium iron phosphate version of the Good Cat is selling too well, with a large backlog of orders that is difficult to process all at once. Secondly, the Ora Good Cat is produced at Great Wall's Taizhou production base, which is a newly built factory, and the production capacity of a new factory is a process of gradual improvement. Therefore, the current supply shortage of the Ora Good Cat may persist for some time. Thirdly, there is a shortage of lithium iron phosphate batteries, which is an issue with the battery supplier. Regarding the deposit issue, the sales representative also mentioned that if you want to order a car now, you need to pay a deposit of 20,000 yuan first. If you are concerned about the long waiting time, both parties can agree on a delivery date. If this date is exceeded, the deposit can be refunded free of charge.

10

4

Share

What does BMW adaptive mean in Chinese?

How Long Should the Engine Run After a Jump Start Before Turning It Off?

What are the reasons for the Audi A4L not starting and making a clicking sound?

How many kilometers should a new Mercedes-Benz drive for its first maintenance?

How to Turn On the Geely Vision Dash Cam?

What Causes Shaking When Starting a Car?

Why is the delivery of Ora Good Cat so slow?

What is the correct way for a car to pass over speed bumps?

Can the Toyota Levin's rearview mirrors automatically fold?

What is the general idle speed of an engine?

What are the symptoms of overfilled engine oil in a car?