What does AUX mean in Chinese?

1 Answers
AndresLee
07/29/25 9:56pm
AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio in electronic products can be connected to the car audio through the headphone jack and AUX interface, allowing the audio to be played on the car audio broadcasting facilities. The USB interface can be used to insert a USB drive for audio playback. When using it, connect one end to the AUX interface and the other end to a video player such as a mobile phone, MP3, or MP4. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will also stop (the interface is generally a 3.5mm standard headphone jack). Aux is the abbreviation for Auxiliary, which is an additional signal line design. In general audio equipment, in addition to the standard output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. When there are special applications, such as additional audio output or input, these terminals can be used. These backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, or connecting with a MODEM via a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because they are used in different configuration environments. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are usually impossible in user mode, such as initialization, restoring initial configurations, or correcting abnormal user modes. It provides a fixed port for the device, which can be used as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup functions for hardware products can be achieved. Note: When using the AUX interface, make sure to purchase the correct connecting cable and avoid plugging the audio cable into the wrong port. It is best to follow the steps outlined in the product's user manual when using the AUX interface. If you are still unsure, you can consult the product's official website or call for assistance.
Was this review help?
12
4
Share
More Forum Discussions

How many kilometers can a Fit drive after the fuel gauge turns red?

The Fit can travel approximately 15 to 20 kilometers after the fuel warning light comes on. After the fuel indicator light illuminates, avoid sudden braking and low-speed driving; maintain a speed between 50 to 80 km/h. Taking the 2021 Fit CVT Trend Edition as an example: 1. Dimensions: Its body length, width, and height are: 4109mm, 1694mm, 1537mm, with a wheelbase of 2530mm. 2. Powertrain: The 2021 Fit CVT Trend Edition features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131 PS, maximum power of 96 kW, and maximum torque of 155 Nm, paired with a CVT transmission.
4
2
Share

When will the China VI standard be implemented?

Starting from July 1, 2020, the China VI emission standard for light-duty vehicles has been implemented nationwide. Below is relevant information about the China VI emission standard: 1. Relevant legal provisions: On December 23, 2016, the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine issued the 'Limits and Measurement Methods for Emissions from Light-Duty Vehicles (China VI)', which came into effect on July 1, 2020. On June 22, 2018, the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine issued the 'Limits and Measurement Methods for Emissions from Heavy-Duty Diesel Vehicles (China VI)', which came into effect on July 1, 2019. 2. Benefits of implementing the China VI emission standard: The implementation of the China VI emission standard can not only effectively improve environmental issues but also further drive the advancement of internal combustion engine technology and the development of the new energy vehicle market.
13
4
Share

Can a Car with Modified Grille Pass the Annual Inspection?

Whether a car with a modified grille can pass the annual inspection depends on whether the manufacturer of the grille has filed for record and whether the vehicle matches the photo on the vehicle registration certificate. Here is some information about car grilles: 1. Function: The main functions of a car grille are to provide air intake and ventilation for the radiator, engine, and air conditioning, as well as to protect internal components from damage by foreign objects during driving and to enhance aesthetics and individuality. In automotive engineering, the grille is used to cover the body to allow air to enter. 2. Modification Conditions: The grille can be modified before purchasing a new car, which does not affect registration and annual inspection. If you want to modify the grille, you can do so after the vehicle has been registered, and the modified vehicle can pass the annual inspection normally. Without approval from the traffic management department, modifying the grille is illegal, and the vehicle cannot be registered or pass the annual inspection.
9
0
Share

What is the optimal RPM for a car at 120 km/h?

Car at 120 km/h optimal RPM is 3400 rpm, the following is an extended introduction: 1. Top gear RPM introduction: Under normal driving conditions, the engine RPM in top gear is as follows: when the speed reaches 100 km/h, the RPM is generally 2800 rpm; when the speed reaches 110 km/h, the RPM is generally 3200 rpm. 2. The relationship between engine RPM and vehicle speed: The conversion relationship between engine RPM and vehicle speed is: vehicle speed = engine RPM × current gear ratio × wheel circumference. From this, it can be seen that engine RPM and vehicle speed are not in a one-to-one relationship, but also depend on the current gear, i.e., the gear ratio of the transmission. At the same speed, the RPM will be smaller. When driving, if the car's speed remains the same but the RPM becomes lower or higher, this is related to the car's displacement, and another factor is the gear of the transmission.
11
3
Share

What are the most basic car knowledge for learning to drive?

Learning to drive requires mastering some basic car knowledge: 1. Pay attention to speed: As long as you're not on a highway, beginners should maintain a steady speed of around 60, which helps with control. 2. Observe the rearview mirrors frequently: Rearview mirrors allow you to monitor the road conditions behind and to the sides of your vehicle, especially when changing lanes, reversing, or overtaking, making them very important. 3. Maintain a safe distance: Beginners often follow too closely. If the car in front brakes or cuts in, the typical reaction is to brake immediately, sometimes leading to oversteering due to nervousness, which can cause accidents. Therefore, keeping a safe distance from the car ahead is crucial. If someone cuts in, slow down appropriately to yield. 4. Use lights correctly: Avoid turning on hazard lights randomly. Turn on the parking lights at dusk, and use fog lights only in foggy conditions with poor visibility.
3
0
Share

Can I take the driving test on weekends?

Because the test is conducted at the driving school center, and the staff at the driving test center generally have weekends off, there are no staff available to conduct the test. Therefore, you cannot take the driving test on weekends, and all driving test students need to make appointments on weekdays. The driving school is managed by the traffic police, the traffic department is managed by the Ministry of Public Security, and the public security department is managed by the government, implementing a six-day workweek system. Although you cannot take the test on weekends, the driving school still operates normally, and students can choose to practice driving at the driving school on weekends. The basic process of obtaining a driver's license includes a physical examination. Before enrolling in a driving school, a pre-enrollment physical examination is required. Registration can be done at the vehicle management office or at a well-known local driving school. Then, you need to take the four subjects of the driver's license test, and upon passing, you can obtain the driver's license. Methods for scheduling the driver's license test: You can make an appointment through the 12123 platform. You can log in to 12123 10 days in advance to check if there is a test available on your selected workday. If there is, you can proceed with the appointment. If a user who successfully scheduled a test cancels the appointment due to personal reasons, the cancellation time will be used as the sorting time.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.