What does Aux mean?

2 Answers
LeFaith
07/29/25 11:11pm
Aux is an audio input interface that can output audio from electronic audio devices including MP3 players, with the purpose of connecting to the car audio system to play music from these devices. Aux is the abbreviation for Auxiliary, which refers to an additional signal line design. On audio equipment, in addition to the standard output and input terminals, there are often several input/output terminals labeled "Aux" as backup connection points. When car owners have specific needs, such as requiring additional audio output or input, they can use these terminals. These backup terminals or lines, regardless of being input or output, are collectively referred to as Aux.
Was this review help?
12
0
Share
VonJake
08/16/25 1:24am
As a car enthusiast, let me talk about AUX. Its full name is Auxiliary Input, and its main function is to add an external audio source input to the car's audio system. The typical form is the round 3.5mm jack, which can connect to a phone or MP3 player to play music. I remember this was the most convenient method on early devices—unlike Bluetooth, it didn’t drain battery or introduce latency, and it preserved sound quality. It’s especially practical while driving—you can play custom playlists or podcasts without the distraction of fiddling with the dashboard, making it much safer than looking down at your phone. However, newer cars are gradually phasing out this feature, replacing it with USB or wireless options. The AUX port in my old car is still in use. If issues like no sound occur, first clean the port of dust and check if the cable is intact—most of the time, minor fixes will do the trick. Overall, AUX is an economical and efficient entertainment expansion solution, especially for enhancing comfort during long trips.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the 2007 Besturn B70 in liters?

The fuel tank capacity of the 2007 Besturn B70 is 64 liters. The Besturn B70 comes in a total of 7 variants, meeting both National III and National IV emission standards. The 2007 Besturn B70 is positioned as a mid-size sedan, with dimensions of 4705mm in length, 1782mm in width, and 1465mm in height, and a wheelbase of 2675mm. The Besturn B70 offers two engine options: 1. A 2.0L inline 4-cylinder naturally aspirated engine, paired with either a 6-speed manual or 5-speed automatic transmission, delivering a maximum power of 108KW; 2. A 2.3L inline 4-cylinder naturally aspirated engine, mated to a 5-speed automatic transmission, producing a maximum power of 120KW.
15
5
Share

Why Can't Beginners Drive in a Straight Line?

Beginners may struggle to drive in a straight line because they are not yet accustomed to looking far ahead while driving. Not accustomed to looking far ahead while driving: Many people have a common habit of only focusing on the front of the car while driving. The front of the car and the interior dashboard are usually oval-shaped. This oval shape can create a visual discrepancy, making beginner drivers feel that the car is misaligned, leading them to constantly adjust the steering wheel. As a result, they end up driving in an S-shaped path. Solution: The first step to driving straight is to look far ahead and not just focus on the front of the car. Lack of understanding of the car's steering wheel: Many beginner drivers believe that the car will immediately change direction as soon as they turn the steering wheel. However, there is a slight delay in the steering response. If the car is drifting slightly, it will take a few seconds to straighten out after adjustment, rather than immediately correcting itself. Solution: Avoid unnecessary steering wheel movements and keep a relaxed grip on the steering wheel.
8
0
Share

What does Audi coolant pump 2 open circuit mean?

Audi coolant pump 2 open circuit means there is a fault with a coolant pump that requires inspection or replacement. Coolant pump 2 is an auxiliary water pump located not far from the main water pump, used for continuous heat dissipation after the car is turned off. Check the wiring harness and the small water pump. It needs to be inspected and repaired at a 4S shop. Additional information: 1. Wiring harness: The wiring harness is directly connected to the engine computer via a plug without a fuse. The water pump of this car is installed under the intake pipe, at the junction of the engine and transmission. Replacing the water pump requires removing the intake pipe. 2. Coolant: Coolant is an essential part of a car engine. It circulates in the engine cooling system, carrying away excess heat generated during engine operation, allowing the engine to operate at normal working temperature. When the coolant is insufficient, it will cause the engine water temperature to rise too high, leading to engine component damage. Therefore, once the owner finds the coolant is insufficient, it should be replenished promptly.
16
5
Share

What is the difference between dq380 and dq381?

The difference lies in the fact that dq381 can reduce engine wear and fuel consumption compared to dq380. Here are the detailed explanations: 1. In dq380, the oil pump gear is engaged with the clutch gear and is powered by the clutch. Therefore, whenever the clutch operates, the oil pump works, creating oil pressure. Under any circumstances, this consumes a portion of the engine's kinetic energy. In contrast, dq381's oil pump is not engaged with the clutch but has a dedicated power source. It operates only when oil pressure is needed and stops when not in use. This highlights the advantage of dq381, reducing the oil pump's consumption of the engine's kinetic energy. Theoretically, it also reduces emissions and achieves the goal of lowering fuel consumption. 2. Compared to dq380, dq381 has changes beyond just using higher viscosity ATF oil and optimizing friction for seals and bearings. The clutch module and the hydraulic system of the oil pump have also been modified. In the clutch module, the K1 return spring has been changed from a spiral type in dq380 to a diaphragm type. Hydraulically, an additional electric oil pump linked to the CAN bus has been added, controlled via valve adjustments. This supports the hydraulic circuit for clamping the clutch plates and operating the shift mechanism. The oil can also flow to the pressure circuit for lubricating and cooling the shafts, gears, and clutch plates. With the addition of the electric oil pump, the transmission can continue to supply oil to components during start-stop operation and coasting mode, unaffected by engine speed. It also improves the responsiveness of clutch re-engagement when the engine restarts.
5
3
Share

What are the test items for the manual transmission Subject 2 exam?

The C1 driver's license Subject 2 exam has five mandatory test items: reversing into a garage, parallel parking, curve driving, right-angle turning, and hill start and stop. Some regions also include a high-speed card retrieval item. Passing standard: The full score is 100 points, with evaluation criteria set for disqualification, 20-point deduction, 10-point deduction, and 5-point deduction. The C1 driver's license permits driving small and micro passenger vehicles, among others. Reversing into a garage: The examinee must park the car in a designated garage without stalling the engine, sweeping the line with the car body, or crossing the line. Parallel parking: The car must be parked in a side garage without crossing or sweeping the line, and the turn signal must be used appropriately. Curve driving: Safely navigate an S-curve while being mindful of the car body sweeping or crossing the line. Hill start and stop: Park the car on a designated slope with the front and rear distance not exceeding 50 cm, and smoothly start from the slope. Right-angle turning: Safely navigate a 90-degree right-angle turn without crossing or sweeping the line and using the turn signal. Subject 2 exam tips: Before starting the car, adjust the seat height and rearview mirrors to ensure a wide field of vision, and fasten the seatbelt. During the exam, do not stop unless the voice prompt indicates a failure. For parallel parking, find the correct angle, turn the steering wheel quickly, react promptly, and coordinate with the car's speed. For hill start and stop, remember to pull the handbrake, turn on the left turn signal when starting, release the handbrake, stabilize the clutch, and simultaneously press the accelerator while releasing the clutch to avoid stalling or rolling back. For right-angle turning, find the reference point before turning and coordinate with the car's speed. For curve driving (S-curve), slow down and drive carefully. For reversing into a garage, control the speed, find the reference point, and make minor adjustments if the rearview mirror shows any deviation. Subject 2 deduction items: Reversing into a garage: Car body crossing the line results in a 100-point deduction and disqualification; failing to fully enter the garage results in a 100-point deduction and disqualification; stopping midway deducts 5 points each time; failing to complete the exam within the specified time results in a 100-point deduction and disqualification. Parallel parking: Car body crossing the line after stopping in the garage results in a 100-point deduction and disqualification; stopping midway deducts 5 points each time; tires or car body touching the edge line deducts 10 points; failing to complete the exam within the specified time results in a 100-point deduction and disqualification. Curve driving: Wheels crossing the road edge line results in disqualification; stopping midway results in disqualification; driving in a gear lower than second deducts 5 points. Right-angle turning: Wheels crossing the road edge line results in disqualification; stopping midway deducts 5 points each time. Hill start and stop: If the car's front bumper or motorcycle's front axle is not aligned with the pole line and exceeds 50 cm after stopping, it results in disqualification; exceeding the specified start time results in disqualification; if the car's front bumper or motorcycle's front axle is not aligned with the pole line but does not exceed 50 cm after stopping, it deducts 10 points; if the car body is more than 30 cm but less than 50 cm from the road edge line after stopping, it deducts 10 points; failing to fully engage the parking brake deducts 10 points. The C1 exam consists of four subjects, with other items as follows: Subject 1: Tests basic road traffic knowledge. Subject 3: Tests 16 driving skills, including preparation, starting, and straight-line driving. Subject 4: Tests safe and civilized driving requirements, similar to Subject 1, both being theoretical exams.
15
1
Share

Is it necessary to apply film on car windows?

Applying film on car windows is not mandatory; it depends on personal preference. However, it is strictly prohibited to apply film on car headlights, as doing so can affect the lighting performance, especially with colored films. Car window film refers to a thin layer applied to the front and rear windshields, side windows, and sunroof, also known as solar film or heat-insulating film. Its primary functions include blocking ultraviolet rays, reducing heat, preventing injuries from shattered glass, minimizing glare, and, thanks to its one-way visibility feature, protecting personal privacy.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.