What does automatic transmission mean in a car?

1 Answers
RileyFitz
07/29/25 12:48pm
An automatic transmission car generally refers to a vehicle that uses an automatic transmission (AT) to regulate speed. While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine's speed and load, replacing the driver's subjective judgment of timing and gear-shifting operations. Below is relevant information about automatic transmission cars: 1. Automatic transmission cars typically use a hydraulic transmission device to replace the mechanical clutch in manual transmission cars, hence there is no clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and insufficient to propel the car forward. When the gear lever is placed in the drive position and the brake pedal is released, as the accelerator is pressed and the engine speed increases, the transmitted torque increases, pushing the car forward. 2. In modern automatic transmission cars, the driver only needs to control the accelerator pedal. The computer analyzes signals such as engine throttle opening and vehicle speed collected by sensors, automatically controlling the transmission or shifting the transmission into different gears.
Was this review help?
7
2
Share
More Forum Discussions

Is the Audi RS4 four-wheel drive?

Audi RS4 is four-wheel drive, equipped with a full-time four-wheel drive system. The specific details are as follows: 1. The length, width, and height of the Audi RS4 are 4782 mm, 1866 mm, and 1437 mm respectively, with a wheelbase of 2826 mm. The Audi RS4 uses a 2.9-liter twin-turbocharged V6 engine. This engine delivers 450 horsepower and a maximum torque of 600 Nm, with peak power output between 5700 and 6700 rpm and maximum torque available from 1900 to 5000 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The engine is paired with an 8-speed automatic transmission (8AT). The use of an 8AT improves gearshift smoothness and fuel efficiency. The 8AT transmission also offers better reliability and durability. 3. The front suspension of the Audi RS4 uses a five-link independent suspension, and the rear suspension also employs a five-link independent suspension. The use of five-link suspensions on both ends enhances the car's handling and ride comfort. 4. The five-link suspension has a relatively complex structure, and its larger size occupies more space. The cost of using five-link suspensions on both the front and rear is higher. 5. The five-link suspension improves wheel contact with the ground, significantly enhancing the car's cornering performance and handling.
13
0
Share

How to Adjust the Time on BYD F3?

BYD F3 time adjustment method: There is a CLOCK button on the CD player. Press and hold it until the screen flashes, then press H to adjust the hour and M to adjust the minutes. Finally, lightly press CLOCK to lock the settings. The BYD F3 has body dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, with a wheelbase of 2600mm. The BYD F3 is equipped with a 1.5L four-cylinder naturally aspirated engine, paired with a 5-speed manual transmission, delivering a maximum power of 80 kW and a maximum horsepower of 109. In terms of configuration, standard features across all models include one-key start, steering wheel height adjustment, leather seats, and an electronic anti-theft system.
10
3
Share

How to Reset the Tire Pressure on a Magotan?

The method to reset the tire pressure monitoring system on a Magotan is as follows: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "dong" sound. Release the button, and the tire pressure monitoring system will store the current normal tire pressure data, automatically clearing the previous data. Finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver to any leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other tires. By comparing the rotational speed differences between tires, the system monitors the tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and a four-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect low pressure in multiple tires simultaneously. However, it still cannot provide real-time pressure data for all four tires as a direct system does.
12
1
Share

How to Detect Faults When the Generator is Not Generating Electricity?

Generator not generating electricity detection method: Use a multimeter voltage range or an external ammeter for detection. The reasons for the generator not generating electricity are: 1. Diode breakdown, no rectification effect; 2. The brush is stuck in the brush holder; 3. The rotor's magnetic field winding is not energized; 4. The stator windings are short-circuited or grounded; 5. The rotor's claw pole is loose. The car generator is the main power source of the car, its function is to supply power to all electrical equipment when the engine is running normally, and at the same time charge the battery. The car generator is composed of stator, rotor, end cover and bearing components, among which the stator is used to generate alternating current.
15
3
Share

How to Turn Off a Car Alarm?

To turn off a car alarm, you can follow these methods: 1. Open the engine hood to locate and turn off the alarm; 2. Remove the alarm fuse by locating the car's fuse box and using professional tools to remove the alarm fuse; 3. Adjust the sensitivity of the car's anti-theft system to a lower setting; 4. Use the car key to open the door and wait for a few minutes, and the alarm sound will stop. The functions of a car alarm are: 1. Utilizing the mobile communication network to activate the anti-theft function when the vehicle enters the locked state; 2. When external force strikes the vehicle or the sensor detects vibrations within the alarm range, it will sound the horn.
15
2
Share

What to Do When Audi Tire Pressure Warning Light Comes On?

Audi tire pressure warning light solution: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found upon inspection, drive to a tire shop promptly for a repair, then reinflate the tire; If the tire pressure warning light comes on again some time after inflation without any puncture, it might be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to veering, among other factors detrimental to driving safety.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.