What does automatic high-low beam mean in cars?

2 Answers
OSebastian
07/24/25 2:30pm
Automotive automatic high-low beam lighting system is a headlamp system that can automatically switch between high and low beams to adapt to changing driving conditions. It is one of the latest technologies in automotive lighting internationally. There are four types of car lights: halogen lamps, xenon headlights, LED car lights, and laser headlights. The functions of car lights are: Activating turn signals to alert following vehicles and reduce rear-end collisions; improving visibility of road conditions to enhance driving safety; informing trailing vehicles when braking to prompt speed reduction; using hazard lights during emergency temporary stops or in poor visibility conditions to notify passing vehicles. Car light maintenance methods: Regularly check lamp covers to prevent water droplets; replace bulbs periodically; adjust headlight height properly; use high-quality bulbs for replacements; protect against impact from foreign objects.
Was this review help?
4
5
Share
GarrettRose
08/11/25 8:18am
Auto High Beam is an intelligent lighting control system where onboard sensors detect real-time changes in light sources ahead, such as headlights from oncoming vehicles or roadside lighting. The system automatically switches between high and low beams, eliminating the hassle of manual operation and potential glare risks for drivers. I frequently test this feature during night driving—it uses a camera to analyze light intensity, increasing brightness for better visibility on open roads and dimming when vehicles are detected nearby to ensure safety. Key benefits include reduced distracted driving and enhanced driving comfort. Compared to traditional lighting controls, it better adapts to varying road conditions, though note that the system may respond slower in foggy weather. Overall, this technology relies on precise calculations by the vehicle's computer, making lighting more user-friendly.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

How many cylinders does the BMW 1 Series have?

BMW 1 Series is equipped with a three-cylinder engine. Here is an introduction to the BMW 1 Series: 1. The BMW 1 Series is a compact sedan launched by BMW; 2. This car is BMW's entry-level model; 3. In terms of power, the BMW 1 Series offers two powertrain options, equipped with a 1.5T turbocharged engine and a 2.0T turbocharged engine respectively. Here is additional information about the engines: 1. The 1.5T turbocharged engine is a three-cylinder engine, while the 2.0T turbocharged engine is a four-cylinder engine; 2. The 1.5T engine has a maximum power of 100 kW and a maximum torque of 220 Nm, while the 2.0T engine has a maximum power of 141 kW and a maximum torque of 280 Nm; 3. In terms of the transmission system, the 1.5T model is paired with a 6-speed automatic transmission, and the 2.0T model is paired with an 8-speed automatic transmission.
4
2
Share

Is the Range Rover Sport New Energy a Plug-in Hybrid Vehicle?

Yes, the Range Rover Sport New Energy is a plug-in hybrid vehicle. As of October 19, 2019, there are two models of the Range Rover Sport plug-in hybrid available for sale: the 2020 P400e SE and the 2019 P400e SE. The two models differ only in terms of configuration, while the exterior, interior, and major components (engine, transmission, chassis) remain the same. More details are as follows: 1. The Range Rover Sport New Energy is positioned as a mid-to-large-size SUV. In terms of dimensions, it measures 4879x2073x1803mm (LxWxH) with a wheelbase of 2923mm. The powertrain consists of a 2.0-liter inline 4-cylinder turbocharged engine and an electric motor, paired with an 8-speed automatic transmission. 2. The engine delivers a maximum power of 221KW and a peak torque of 400N·m, while the electric motor provides a maximum power of 85KW and a peak torque of 275N·m. The combined system output is 297KW and 640N·m. 3. All models feature full-time four-wheel drive. For suspension, the front uses a double-wishbone independent suspension, and the rear employs a multi-link independent suspension. All models come with adjustable suspension to ensure passenger comfort.
6
0
Share

What is the reason why the Changan CS75's one-button start fails to ignite?

The reasons why the Changan CS75's one-button start does not respond include operational errors, such as pressing the button without stepping on the brake, which will power the car but not start the engine; the gear not being in the P position; frequently placing the car key near electronic devices, causing interference with the low-intensity radio waves in the key; the car key running out of battery; or a malfunction in the car. More details are as follows: Solutions: Check the spark plugs. Since the spark plugs are crucial to the car's ignition system, and the ignition system is key to the engine's operation, the performance of the spark plugs affects the overall working performance and efficiency of the vehicle. Place the car in a warm environment, unscrew the spark plugs, clean the oil between the electrodes, and reassemble them before starting the car. A thorough solution is to inspect the ignition system to eliminate low ignition energy. At the same time, drip some engine oil into the combustion chamber to facilitate starting. After starting, take the car to a service station for a no-disassembly cleaning. In severe cases, disassemble and clean the cylinder head. Correct method for one-button start: After getting into the car, there is no need to take out the key; just keep it on your person. Following the traditional method, step on the brake and directly press the start button to start the car. However, after getting into the car, without stepping on the brake, press the start button twice in succession to initiate a full vehicle self-check, which takes a few seconds.
4
4
Share

What are the body dimensions of the Vios FS?

The body dimensions of the Vios FS are 4140mm in length, 1700mm in width, and 1485mm in height, which are official data. The length of the Vios FS refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The Vios FS is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, with a maximum power of 79 kilowatts and a maximum torque of 138 Newton meters. The maximum power speed is 6000 rpm, paired with a 5-speed manual transmission. There are relevant national regulations regarding vehicle dimensions. According to the national standard "GB1589-89", the total width of the vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data lies in providing enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5 meters to meet the usage requirements of public roads.
20
3
Share

What are the causes of coolant leakage in the Dodge Journey?

Coolant leakage in the Dodge Journey generally occurs due to the following reasons: 1. Hose rupture. 2. Engine oil emulsification. 3. Loose radiator cap. 4. Leaking rubber hose connections. 5. Cracked radiator cooling tubes. 6. Radiator damage. Solutions for coolant leakage are as follows: 1. Hose rupture: If the leak is a crack ≤1mm or hole ≤2mm while driving, add a bottle of radiator sealant into the coolant reservoir and run the engine. 2. Engine oil emulsification: Disassemble the engine to replace the cylinder head gasket. 3. Radiator damage: (1) Add radiator sealant and run the engine. (2) After opening the cooling system's circulation for 5-10 minutes, all leaks (including coolant/antifreeze) from hoses, gaskets or the radiator will stop without requiring drainage, and won't affect cooling or cause clogging. (3) If no sealant is available, for minor leaks in cooling tubes, temporarily stuff tobacco strands into the radiator to utilize water pressure for plugging leaks. 4. Leaking cooling tubes: Cut the leaking section, plug it with soap-coated cotton, then crimp and flatten the tube end with pliers to stop leakage. 5. Leaking rubber hose connections: Tighten hose clamps with a screwdriver and pliers. For damaged hoses, temporarily seal cracks with adhesive tape. 6. Loose radiator cap: Securely fasten after inspection.
8
0
Share

What checks should be performed on the vehicle before driving?

Engine SCR warning light illumination indicates a malfunction in the corresponding component's function. Common causes: Insufficient urea level, nitrogen oxide sensor failure, urea injector malfunction, urea injector clogging, or urea pump failure. Engines include internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, and electric motors. Professional equipment required for diagnosis: For such faults, professional diagnostic equipment is generally required. It is recommended to refer to the maintenance checklist in the engine service manual and visit the nearest service station for inspection and repair. Free repairs are provided during the warranty period.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.