What does AUTOHOLD mean?

1 Answers
LaJoy
07/25/25 11:31am
AUTOHOLD is an automatic parking system that can adjust to optimal driving conditions based on different road conditions. It effectively prevents frequent gear shifts on poor road surfaces and enforces downshifting during overtaking. When the AUTOHOLD button is pressed in D mode, the transmission will maintain second, third, or fourth gear. AUTOHOLD is a technical application that enables automatic handbrake functionality while driving. This technology allows drivers to avoid prolonged braking when the vehicle is stationary and prevents unnecessary coasting when the automatic electronic parking brake is engaged, making it particularly useful for uphill and downhill driving as well as frequent starts and stops.
Was this review help?
11
1
Share
More Forum Discussions

What are the components of a parking sensor?

Parking sensors consist of: ultrasonic sensors (commonly known as probes), controllers, and displays (or buzzers). Parking sensors, also known as "reverse collision avoidance radar" or "parking assist devices," are particularly useful when reversing a car, helping to prevent accidents and hazards. Parking sensors are safety assist devices for car parking or reversing, which can inform the driver of surrounding obstacles through sound or more intuitive displays, eliminating the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle, and helping the driver overcome blind spots and unclear vision.
12
5
Share

How to Change Lanes Before an Intersection When Driving?

When changing lanes before an intersection, you should enter the desired lane within the dashed line area according to the guidance arrow. Below is additional information: 1. At intersections with marked guide lanes: Enter the guide lane based on the direction you intend to proceed. 2. When preparing to enter a roundabout: Yield to vehicles already inside the intersection. 3. When making a left turn: Turn from the left side of the intersection center point, activate the turn signal, and use low beams when driving at night. 4. When encountering a green light: Proceed in order. 5. When encountering a red light: Stop in order behind the stop line; if there is no stop line, stop before the intersection.
5
5
Share

What is the reason for no sound when the Qoros 5 connects to Bluetooth?

The reasons for no sound when the Qoros 5 connects to Bluetooth are as follows: 1. Volume issue: The car Bluetooth is connected but there is no sound, which may be because the phone is on silent mode or the volume is set to zero, or the car navigation system has no sound or the volume is too low to hear. 2. Version and other issues: Some car Bluetooth systems may still play the last media audio source if the car is not in the Bluetooth media audio playback interface after connection, resulting in no sound when playing music. If only the music has no sound, it cannot be ruled out that there is a problem with the individual application version.
1
4
Share

Why does the reversing radar keep beeping?

Reasons why the reversing radar keeps beeping: 1. The reversing radar sensor is dirty; 2. Water ingress in the probe; 3. Malfunction of the reversing radar sensor or controller. The reversing radar, also known as the reverse collision avoidance radar or parking assist device, mainly consists of ultrasonic sensors, a controller, and a display unit. The reversing radar is a safety auxiliary device for parking or reversing a car. It can inform the driver of the surrounding obstacles through sound or more intuitive display, relieving the driver from the trouble of looking around when parking, reversing, and starting the vehicle, and helping the driver eliminate blind spots and blurred vision.
4
3
Share

Will Steering Hard Without Ignition Damage the Car?

No, but it may cause slight wear and tear. The steering will feel heavier because the power steering pump is not activated. Another scenario that may cause damage is turning the steering wheel while the vehicle is stationary. Below are some precautions regarding steering wheel operation: 1. While driving, avoid prolonged one-handed operation unless necessary, and do not rest your hand on the gear shift or window frame for extended periods. 2. Do not turn the steering wheel too forcefully or make sudden turns; avoid turning the steering wheel when the vehicle is stationary. 3. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and potential accidents.
17
2
Share

Does the Qoros 3s have a reversing camera?

The high-end version of the Qoros 3s is equipped with a reversing camera. Here are the specific details about the Qoros 3s: 1. Exterior: The Qoros 3s features the family-style front grille design, with sharp-looking headlights that incorporate LED light sources. The rear of the car has a full-bodied design, with taillights that showcase the typical Qoros design style, and the dual-exhaust layout adds a sporty feel to the vehicle. 2. Interior: The seats are made with a combination of leather and fabric materials. In terms of features, it includes a multimedia display screen, multifunction steering wheel, one-button start, and rear air vents.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.