What does Auto Start-Stop mean?

What Are the Reasons Why a Mechanical Key Can Be Turned But Cannot Open the Car Door?

Mechanical key can be turned but cannot open the car door may be due to the mechanical key not matching, the car door being frozen, or the lock cylinder malfunctioning. Mechanical key not matching: Only a mechanical key that matches the lock cylinder can open the car door. When a new key cannot match the lock cylinder, it may cause the car door to fail to open. Car door being frozen: In winter, when the temperature is too low, the car door is extremely prone to freezing. In this case, even if the lock cylinder is unlocked, the car door still cannot be opened. Lock cylinder malfunctioning: If the internal parts of the lock cylinder are broken, even if the mechanical key can be turned, the car door still cannot be opened.

10

2

Share

What does the exclamation mark in parentheses indicate as a warning light?

Red exclamation mark (specifically in the form of an exclamation mark inside a circled parenthesis), this represents a warning for the braking system, mainly indicating a malfunction in the braking system or low brake fluid level. Solution: Immediate inspection and repair of the braking system is required to avoid accidents. Apart from the red exclamation mark indicating a braking system fault, all other exclamation marks on a car are yellow, representing general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Fault: An exclamation mark inside a triangle, if this symbol lights up, it indicates a fault in the car's general performance or components and functions. Mainly includes parking sensor faults, fuel cut-off system intervention or malfunction, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside, this is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. Transmission oil needs to be replaced promptly. Abnormal Tire Pressure: An exclamation mark in the middle of a line under a parenthesis, this represents the tire pressure monitoring warning light. When the car's tire pressure is too low, this warning light will illuminate. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark, this is the lighting fault indicator, indicating a fault in the car's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify where the problem lies.

18

3

Share

Which Suzuki Beidouxing model uses an imported engine?

The older 1.2L model used an imported engine. Here are some relevant details about the Beidouxing: 1. Dimensions: The Beidouxing is a microcar under Changan Suzuki, with length/width/height measurements of 3400mm, 1575mm, and 1670mm respectively, and a wheelbase of 2335mm. The latest Beidouxing model uses a 1.4L naturally aspirated engine. 2. Powertrain: The Beidouxing's 1.4L naturally aspirated engine delivers 97 horsepower and 120 N·m of maximum torque. This engine reaches its maximum power at 6000 rpm and peak torque at 3600 rpm. It features VVT technology and multi-point fuel injection, with an aluminum alloy cylinder head and block. The engine is paired with a 5-speed manual transmission.

19

4

Share

Where is the crankshaft sensor located on the Sylphy?

The crankshaft sensor on the Sylphy is installed on either the flywheel side or the crankshaft pulley side of the engine. The principle of the crankshaft position sensor is to provide ignition timing by confirming the crankshaft position, which is used to detect the crankshaft angle at the piston top dead center and the engine speed. The function of the crankshaft position sensor is to determine the position of the crankshaft, specifically the crankshaft angle and engine speed. The Sylphy's body dimensions are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. The 2019 National VI version of the Sylphy is equipped with a 1.6-liter inline 4-cylinder naturally aspirated engine, where 1.6 refers to the engine displacement of 1.6 liters.

12

1

Share

How to Determine if the Car's Air-Fuel Mixture is Too Rich?

Automobile air-fuel mixture refers to the combination of fuel (such as gasoline or diesel) and air. There are four main methods to determine if a car's air-fuel mixture is too rich. Below is a detailed introduction to these four methods: 1. Presence of fuel leakage: When there is fuel leakage at the carburetor throttle shaft or gasket, it indicates that the car's air-fuel mixture concentration is too high. 2. Decreased engine power: When the air-fuel mixture is excessively rich, the engine's power decreases while fuel consumption increases. 3. Carbon deposits on electrodes: When removing the spark plug, if wet gasoline and significant carbon deposits are observed on the electrode surface, this indicates an overly rich air-fuel mixture. 4. Unstable engine idle: Decreased engine power accompanied by irregular abnormal noises from the muffler also signifies an excessively rich air-fuel mixture.

18

3

Share

What are the reasons for cold start engine speed below 1000 rpm?

Reasons for cold start engine speed below 1000 rpm include: insufficient lubrication, engine carbon buildup, and slow oil temperature recovery. Insufficient lubrication: During cold starts, due to low temperatures, the oil's fluidity is poor, and the engine hasn't been fully lubricated, which may result in lower engine speed. Carbon buildup: If there's carbon buildup in the engine, the speed may drop below 1000 rpm. It's recommended that car owners regularly visit auto repair shops for carbon cleaning to ensure normal daily driving. Slow oil recovery: During cold starts, low temperatures cause the engine oil to become viscous, leading to slow oil recovery. This results in cold start speeds below 1000 rpm. During cold starts, when the engine temperature hasn't reached its optimal working temperature, the fuel injector will automatically increase fuel supply to raise the engine speed. Engine speeds between 1200-2000 rpm are normal during this period. After idling for a few minutes to warm up, the engine speed will automatically drop below 1000 rpm. Engine speeds between 500-1000 rpm are considered normal. After running for a while, the car's computer will automatically adjust the speed.

11

5

Share

What does Auto Start-Stop mean?

What Are the Reasons Why a Mechanical Key Can Be Turned But Cannot Open the Car Door?

What does the exclamation mark in parentheses indicate as a warning light?

Which Suzuki Beidouxing model uses an imported engine?

Where is the crankshaft sensor located on the Sylphy?

How to Determine if the Car's Air-Fuel Mixture is Too Rich?

What are the reasons for cold start engine speed below 1000 rpm?

What lights should be used when passing a slope at night?

What Types of Vehicles Can Be Transported by Car Shipping Services?

What are the differences between the Lynk & Co 03+ and the 03?

What to Do When Car Wiper Blades Make Loud Friction Noises?